Garage
Shop

JL Audio MX300/1 Amplifier with Amplifier Wiring Kit

300W RMS Class-D Weatherproof Ultra Compact Motorcycle / ATV / SSV / UTV / Car Monoblock Amplifier

JL Audio
Shop all JL Audio
highlight-star-icon

• 160 Watts RMS x 1 @ 4 ohms
• 220 Watts RMS x 1 @ 3 ohms
• 300 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 600 Watts
• CEA-2006 Compliant/Preamp Outputs/LPF
• Frequency Response: 20 - 400 Hz
• Dimensions: 8.66"W x 3.09"D x 1.77"H

Learn more about the mx3001_xkit82

We apologize

This item has been discontinued

Description


JL Audio brand icon

Authorized dealer

JL Audio MX300/1

300W RMS Class D MX Series Monoblock Marine and Powersports Amplifier
Quantity: 1

Product Details:

  • MX Series Class D 2 ohms Stable Monoblock Marine Amplifier
  • RMS Power Rating:
    • 4 ohms: 160 watts x 1 channel
    • 3 ohms: 220 watts x 1 channel
    • 2 ohms: 300 watts x 1 channel
  • Total power output: 300 watts
  • Wired bass level remote control with optional JL Audio RBC-1 or JL Audio M-RBC-1
  • Speaker-level (high-level) inputs (Requires adapter like the JL Audio XD-CLRAIC2-SW)
  • Protection Circuitry with Status LED
  • NextD switching amp technology
  • Differential-balanced inputs help eliminate noise
  • Advanced Rollback Protection System prevents thermal shut-down
  • Water-resistance rating IPX7 chassis: corrosion-resistant cast aluminum
  • Input sensitivity:
    • Low level: 250mV - 4 volts
    • High level: 750mV - 15 volts
  • Frequency Response: 20 - 12000 Hz
  • Total Harmonic Distortion (THD): <1%
  • Signal to Noise Ratio: >85 dB
  • Variable low-pass filter: 40 - 400 Hz
  • Subsonic filter: 20 - 40 Hz
  • Variable Bass Boost: 0 - 12 dB
  • Fuse Rating: 30A
  • 8 AWG gauge amplifier wiring kit is recommended for installation
  • Dimensions: 8.66" L x 3.09" W x 1.77" H
  • Authorized Internet Dealer
  • 2 Year Manufacturer's Warranty
  • MFR #: MX300/1

NVX XKIT82

Full Spec 8 Gauge 100% (OFC) Oxygen Free Copper Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 800 Watts
Quantity: 1

Product Details:

  • 8 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
  • Designed for car audio systems up to 800 watts RMS
  • Made from 100% (OFC) Oxygen-Free Copper for pure uninterrupted power and current transfer
  • Tinned conductors for corrosion resistance
  • Pre-installed black nylon mesh covering protects power wire from being damaged
  • Solid Brass and Satin Chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems
  • Pre-terminated seamless power and ground ring terminals provide reliable performance
  • Full Spec cables meet or exceed the American Wire Gauge standards
  • Strand Count: 735
  • CEA-2015 and BC5W2 Compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 20 ft. (6.1 meters) Frosted Blue 8 gauge power wire with seamless crimp ring terminal
  2. 3 ft. (.91 meters) Frosted Black 8 gauge ground wire with seamless crimp ring terminal
  3. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
  4. 40 ft. (12.2 meters) Frosted Black/Blue 16 gauge speaker wire
  5. One 16 ft. (5 meters) 2-channel dual twisted construction RCA interconnect Cable (NVX XIV25)
  6. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 60 amp Mini-ANL fuse
  7. One Black rubber firewall grommet
  8. Two 4 Gauge Nickel Plated spade terminals
  9. Four 18 Gauge Spade terminal
  10. Two 18 Gauge Red butt connectors
  11. Four 16 Gauge quick disconnect
  12. Five 16 Gauge Nickel Plated spade terminals
  13. Ten 6" Black zip ties

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
160 watts x 1 channel
RMS Power @ 2 ohms
300 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
600 watts
Total RMS Power Output
300 watts
Maximum Input Gauge Size
8 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
<1%
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
35 - 300 Hz
Subsonic Filter
20 - 40 Hz
Signal-to-Noise Ratio
>64 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Optional (Accessory required and sold separately)
Fan Cooled
No
Fuse Rating
30A x 1 
Total Fuse Rating
30
CEA-2031 Compliant
Yes
Sonic Certified Amplifier
Not Tested
Amp Bluetooth Connectivity
No
Hi-Res Certified
No
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

MX300/1, XKIT82

Weight:

7.56lbs

Internal SKU:

mx3001_xkit82

Internal Product ID:

181385

Customer Ratings & Reviews



5 star
92%
4 star
8%
3 star
0%
2 star
0%
1 star
0%



Durability
4.9
Value
5
Features
4.9
Design
5
Usability
5

Customer Reviews

Sort by:

Loading...

Best bang for the buck

The following review is for XKIT82, which is a part of the bundle you are viewing.

DO NOT buy Non-Name brand kits that are under 50$, Get this one, NVX is a brand name and they don't cut corners on their products. This kit is everything I needed to install my 12" Rockford Fosgate sub, The gauge is true to spec, everything is fine, the RCA cables are top notch, highly recommend

By anton on March 9, 2014

146

found this helpful.

Great Deal!!

The following review is for XKIT82, which is a part of the bundle you are viewing.

I dont think I can find another kit that is as good as this one. Sure is very high quality as well as the materials of the sure insulator. It just feels right. Realy heavybduty too. Just buy it. Good stuff.

By Bugatti on January 30, 2014

140

found this helpful.

The Real Deal

The following review is for XKIT82, which is a part of the bundle you are viewing.

I originally purchased this kit because it was a good price and I liked the idea of having true-gauge wire. I was leery of the stuff at my local store as it looked a little cheap. Lots of plastic and not much wire. Not the case here. This is a high-quality wiring kit that gets you everything you need for a basic amp install. Convenient markings on the wire to help you lace the fuse holder and measure your speaker wire. High quality covering and wire, very flexible and plenty of length to help you do a quality job. The connectors supplied could be a little better, but they did do the job. It is nice they are stiff metal, but hand-crimping effectively was a little rough. That is a minor complaint.

I have since purchased a second kit for another amp and from now on NVX is a go-to brand for me.

By Mark on January 17, 2015

135

found this helpful.

amp kit

The following review is for XKIT82, which is a part of the bundle you are viewing.

This is the first time going with NVX. Now..... NVX will be what I always go with.

By Shannon on October 1, 2014

133

found this helpful.

Just what I needed, again!

The following review is for XKIT82, which is a part of the bundle you are viewing.

This amp kit is perfect for installing the 3channel JBL amp I purchased. Amazing quality for the best price out there. Do yourself a favor and look at everything NVX.

I had an extra RCA laying around so I only needed one.

By Ryan on January 19, 2014

129

found this helpful.

Great ofc kit

The following review is for XKIT82, which is a part of the bundle you are viewing.

This is a great kit all of the wires including the RCA is super flexible, I would buy it again in a heartbeat

By Corey on April 26, 2014

129

found this helpful.

NVX XKIT82

The following review is for XKIT82, which is a part of the bundle you are viewing.

I purchased this sub woofer set kit and it had everything needed to install the sub and all for a great price.I would recommend this kit for anyone needing the complete wire kit.

By Galen on March 3, 2014

128

found this helpful.

quick turnaround

The following review is for XKIT82, which is a part of the bundle you are viewing.

When I ordered the product it was out of stock. Estimated delivery was weeks away, but it arrived just a few days later. True 8AWG OFC power and ground cable, high quality remote lead and high quality rca's and speaker leads. 10/10 would purchase again

By AK on May 17, 2015

102

found this helpful.

I love it

The following review is for XKIT82, which is a part of the bundle you are viewing.

I'm glad I bought this kit it has everything I needed and the quality is excellent.

By Peter on April 26, 2015 Checkmark Icon Verified purchase

98

found this helpful.

professional look

The following review is for XKIT82, which is a part of the bundle you are viewing.

I got this for free when i purchased my amp that it was recommended for. I was a little skeptical at first. But after a quick reference to my apm's manual and a little reassurance from the knowledgeable techs at sonic, i was ready. The whole kit come with everything you need and more. The quality is great and looks awesome. I also got a nvx bass knob as well. Thanks sonic.

By Keon on August 10, 2015

88

found this helpful.

Add-ons


Similar Products

Best selling similar products

Rockford Fosgate M2-750X5

• 50 Watts x 4 + 200 Watts x 1 @ 4 ohms
• 100 Watts x 4 + 350 Watts x 1 @ 2 ohms
• 200 Watts x 2 + N/A @ 4 ohms Bridged/Mono
• 5-Channel Amplifer
• Element Ready™ design protects against outdoor exposure
• Top Mounted Control Panel

(1)

$519.99

Kicker PXA300.1

• 150 watts x 1 channel @ 4 ohms
• 250 watts x 1 channel @ 2 ohms
• 300 watts x 1 channel @ 1 ohm
• Total RMS Power: 300 watts
• Class D 1 ohms Stable Monoblock Amplifier

$299.99

JL Audio XDM600/1

• 400 watts x 1 channel @ 4 ohms
• 600 watts x 1 channel @ 2 ohms
• Total RMS Power: 600 watts
• Class D 2 ohms Stable Monoblock Amplifier

(3)

$599.99

JL Audio MX600/3

• 75 watts x 2 channel + 250 watts x 1 channel @ 4 ohms
• 100 watts x 2 channel + 400 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms + 400 watts x 1 channel @ 2 ohms
• Total RMS Power: 600 watts
• Class D 2 ohms Stable 3-Channel Amplifier

(4)

$499.99

Rockford Fosgate Power TM400X4ad

• 100 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class AD 2 ohms Stable 4-Channel Amplifier

(2)

$349.99

JVC KS-DR2001D

• 200 watts x 1 channel @ 4 ohms
• 300 watts x 1 channel @ 2 ohms
• Total RMS Power: 300 watts
• CEA-2006 Compliant
• Class D 2 ohms Stable Monoblock Amplifier

$279.00

Kenwood eXcelon XM802-5

• 50 watts x 4 channel + 300 watts x 1 channel @ 4 ohms
• 75 watts x 4 channel + 500 watts x 1 channel @ 2 ohms
• Bridged: 150 watts x 2 channel @ 4 ohms + 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 800 watts
• Class D 2 ohms Stable 5-Channel Amplifier

$449.00

Alpine KTA-30FW

• 75 watts x 4 channel @ 4 ohms
• 75 watts x 4 channel @ 2 ohms
• Bridged: 150 watts x 2 channel @ 4 ohms
• Total RMS Power: 300 watts
• Class D 2 ohms Stable 4-Channel Amplifier

$419.95

Rockford Fosgate M5-800X4

• 100 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class AD 2 ohms Stable 4-Channel Amplifier

(1)

$629.99

Kenwood eXcelon XM302-4

• 50 watts x 4 channel @ 4 ohms
• 75 watts x 4 channel @ 2 ohms
• Bridged: 150 watts x 2 channel @ 4 ohms
• Total RMS Power: 300 watts
• Class D 2 ohms Stable 4-Channel Amplifier

$299.00

Related Searches


Save up to 10 different vehicles in your garage

Add vehicle
Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon