Hertz MLK1650.3 + Free NVX Sound Deadening, Speaker Baffles and Roller!

6.5" Mille Legend Series 2-Way 4 Ohm component speaker system

Hertz
Shop all Hertz
highlight-star-icon

• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohms Impedance
• Sensitivity: 92 dB

Learn more about the mlk16503_sdsk2_sdrlr1_fring

We apologize

This item has been discontinued

Description


Hertz

Authorized dealer

Hertz MLK1650.3

300W Peak (150W RMS) 6.5" Mille Legend Series 2-Way 4 Ohm component speaker system
Quantity: 1

Product Overview

The Hertz MLK 1650.3 Legend car audio speakers system is a two way kit dedicated to purists , aiming at achieving maximum timbre consistency combined with very high dynamics and extremely extended frequency response.

General Features:

  • 6.5" Mille Legend Series 2-Way Component Speaker system
  • Power Handling:
    • Peak: 300 watts per set / 150 watts each side
    • RMS: 150 watts per set / 75 watts each side
  • Pressed-pulp cone with cotton fibers cone material
  • Tetolon Tweeter Dome
  • Neodymium Tweeter magnet
  • CEA-2031 compliant speakers
  • 4 ohms impedance
  • Frequency Response: 40-25,000 Hz
  • Sensitivity: 92 dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

  • Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.


Hertz MLK 1650.3 owner’s manual

NVX SDSK2 - 90mil 2.3mm THICK

Speaker Kit - 1.38 Square Feet of Sound Damping (Sound Deadening) Material (Two 10" x 10" Pieces)
Quantity: 1

Product Features

  • Two 10" x 10" Pieces of Sound Dampening Material
    • 90.55mil thick (2.3mm)! There are cheaper, inferior solutions at 50-80mil, but we do not recommend that thin of a solution as it will not perform as well.
  • Great sound damping for installing with car door speakers
  • 1.38 Square feet total
  • Made from 100% Butyl Rubber
  • Eliminates road noise
  • Quiets vibrations
  • Increases sound quality and output of car audio system
  • Stops rattles
  • Increases SPL
  • Reduces heat
  • Easy to form aluminum conforms to desired area of vehicle with ease
  • Four step peel and stick design for easy installation
  • Up to 30% thicker than the leading competitors
  • Dimensions (each piece): 10"L x 10"W
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty



NVX FRING65

2 Piece 6.5" or 6.75" Self-Adhesive Foam Speaker Ring Baffle Kit
Quantity: 1

Product Details:

  • Self-Adhesive Foam Speaker Ring Kit
  • Compatible with 6.5" or 6.75" speakers
  • Acoustically seals speakers for better sound performance
  • Prevents front and rear wave cancellation
  • Reduces panels vibrations
  • Improves midbass response
  • Waterproof automotive-grade high-density foam
  • Easy peel and stick installation
  • Foam thickness: 1"
  • Base Pad thickness: 1.75"
  • Sold as a pair
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

NVX SDRLR1 Sound Dampening Rubber Roller

Universal, Professional Heavy Duty Roller for Sound Damping (Sound Deadening)
Quantity: 1

General Features

  • Universal - works with NVX and other brands
  • Professional, Heavy Duty Roller Tool (used at car stereo shops worldwide)
  • 2" Solid Rubber Roller
  • Contoured wood-grip handle for comfortable handling
  • Soft Urethane Rubber Won't Scratch Surfaces
  • Thick Plated Steel Frame
  • Sturdy wood and metal construction for durability
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty


Specifications & Details


Speaker Specifications
Priced Per
Pair
Speaker Size
6-1/2"
Design
2-way Component System
Tweeter Design
Dome
Tweeter Size
1"
Tweeter Composition
Tetolon
Woofer Composition
Pressed Pulp Fiber
Peak Power Handling
300 watts
RMS Power Handling
150 watts
Sensitivity
92 dB
Frequency Response
40 - 25000 Hz
Impedance (Per Voice Coil)
4 ohms
Shallow Mount Installation
No
Top-Mount Depth (Mounting Depth)
2-3/4"
Number of Speakers
2 Woofers + 2 Tweeters
General specifications
Marine Certified
No
Hi-Res Certified
No
Color
Black
Speaker Grilles
Yes
What is in the box?
Paperwork
User manual
WITB: Speakers
Speakers (2)
Grilles (2, attached)
Tweeters (2)
Crossover networks (2)
Mounting screws (4)
Mounting screws (8)
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

MLK1650.3, SDSK2, SDRLR1, FRING65

Weight:

7.90lbs

Internal SKU:

mlk16503_sdsk2_sdrlr1_fring

Internal Product ID:

181479

Customer Ratings & Reviews



5 star
82%
4 star
14%
3 star
2%
2 star
1%
1 star
1%



Durability
4.7
Value
4.8
Features
4.7
Design
4.7
Usability
4.8

Customer Photos & Videos


Customer Reviews

Sort by:

Loading...

good stuff

The following review is for SDSK2, which is a part of the bundle you are viewing.

I got this free when i ordered my 4x6 speakers i installed it on the rear set no space in the front openings so far so good still sticking to the metal and no rattles.

By MIGUEL on January 20, 2014

118

found this helpful.

value

The following review is for SDRLR1, which is a part of the bundle you are viewing.

I hear a roller is a must have for applying dampening, for the price its worth ordering.

By ERIC on January 6, 2014

116

found this helpful.

Good and cheap

The following review is for SDRLR1, which is a part of the bundle you are viewing.

Good product, easy to use and durable. Very helpful in installing sound dampener. It's also cheap for a proper rubber roller.

By Sam on September 22, 2013

114

found this helpful.

Nice Wiring Kit

The following review is for SDSK2, which is a part of the bundle you are viewing.

This is a nice quality kit at a fair price. It had everything that was needed to complete the task.

I had purchased another kit that I really wasn't happy with, and decided to purchase this one. I liked the attention to detail in the preparation of this kit. Recommended.

By Mr Sparkie on September 20, 2014

111

found this helpful.

Why pay more?

The following review is for SDRLR1, which is a part of the bundle you are viewing.

This roller is more than capable of getting the job done. One trick you can do for tight curves is to use the handle of the roller to get the dampening material to conform to them.

All in all, a roller is roller. So, why pay more than this?

By ACLJavi on July 23, 2014

106

found this helpful.

NVX Sound Dampening Roller

The following review is for SDRLR1, which is a part of the bundle you are viewing.

Amazing roller gets the job done well. Seems like everytime i got into little spaces that i couldnt use the roller I cut my hands up this roller saves your hands and saves time. I did have the nut that holds the roller on come off while using it but its easy to put back on, I put it back on by hand. Worth the money for sure.

By Brendan on March 18, 2013

106

found this helpful.

Works pretty good

The following review is for SDSK2, which is a part of the bundle you are viewing.

I bought this product for my trucks doors, and I noticed it's thicker than other sound dampening material I've used before that I paid a lot more for. This is a great product at a great price

By Zach on March 9, 2014

106

found this helpful.

a must have when installing sound dampening products

The following review is for SDRLR1, which is a part of the bundle you are viewing.

Very nice and works very well. I would have never did as good as i did installing nvx sound dampening without this. This and the material is all you need it makes the job very simple. I would reccomend this to anyone who wants a good durable roller.

By Foxy on October 3, 2012

102

found this helpful.

NVX Roller

The following review is for SDRLR1, which is a part of the bundle you are viewing.

I rubbed on about 70-80 sq ft of dampener with this roller, and I wasn't particularly nice to it and it did it's job and is still as new. Works well working dampener into the recesses of sheet metal, but that being said, it is just a medium duty tool. Be decent with it and it will last you a while. Not really any hidden features, it just rolls dampener.

By Amy on June 10, 2014

99

found this helpful.

Works fine

The following review is for SDRLR1, which is a part of the bundle you are viewing.

Bought from Sonic along with Maxxlink VSD-TK 5 pc set. Basic shipping was fast. The roller worked very well. I have large hands and was able to use the roller without a problem. Only thing- check the tightness of the Nyloc nut and bolt that holds the roller on the handle. Mine popped apart while I was on the 5th and last section of damping material. A simple twist together plus an extra 1/8" turn and it did not come off again. I would buy again.

By BZ on January 3, 2015

102

found this helpful.

Add-ons


Similar Products


Best selling similar products

Rockford Fosgate P165-SE

• 120 watts Peak Each, 60 watts RMS Each
• 1" treated PEI (Polyetherimide) Dome Tweeters
• Injection molded mineral filled Mineral-Filled Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB

(4)

$179.99

NVX VSP65KIT

• 375 watts Peak Each, 125 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
• Mounting Depth: 2.51"

(73)

$99.99

Rockford Fosgate P1675-S

• 120 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Injection molded Mineral-Filled Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 92 dB

(17)

$149.99

JBL Stadium 62CF

• 330 watts Peak Each, 110 watts RMS Each
• 3/4" Aluminum Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohms
• Sensitivity: 93 dB

$409.95

JBL CLUB 64CSQ

• 285 watts Peak Each, 95 watts RMS Each
• 1-3/4" Silk Dome Tweeters
• Carbon Fiber cone material
• Impedance: 3 ohms
• Sensitivity: 93 dB

$269.95

Related Searches


Add vehicle

Save up to 10 different vehicles in your garage

Loading...
< Back