300W RMS 10" W1v3 Series Single 4-Ohm Subwoofer
JL Model Comparison
|Model||RMS Power||Cone Material||Surround Material||Sensitivity (dB)||Frequency Response||Xmax (mm||Terminals||Made In America|
|W7 Series||500-1500 Watts||Polypropylene||Foam Overroll||82.7 - 86.3||15-250 Hz||19-32||Push Terminals|
|W6 Series||600 Watts||Polypropylene||Rubber||82.7 - 85.4||20-200 Hz||19||Push Terminals|
|W3 Series||150-600 Watts||Polypropylene||Rubber||80.5-87.90||20-250 Hz||8.89-15.5||Push Terminals|
|W1 Series||150-300 Watts||Polypropylene||Rubber||83.9-86.1||22-200||8-11||Push Terminals|
|W0 Series||300-500 Watts||Polypropylene||Foam||84-88.20||20-250 Hz||11.4-12.7||Push Terminals|
|WX Series||200 Watts||Polypropylene||Foam||86-87.17||22-250 Hz||10||Spade Terminals|
Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS10)
10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil (0.77 cu ft airspace 10SQTC)
You've got an awesome subwoofer there, pal. But where's it gonna go? You can't just throw that thing in the trunk and call it a day. Don't worry, Belva's got your back. With superior construction, great features and everything you need for bass, you'll be ready to pass up that entry-level box you've been eyeballing.
You get quality boxes with solid 3/4" MDF because nothing else will do the job right. You want to flex your windshield, not your box's innards. You get polyfill built into the box, making sure your subs perform perfectly. On top of that, you get a box that's CARB Phase 2 Compliant, meaning your box won't emit as much nasty formaldehyde as the competition. Better for your bass and better for you.
Look, nobody buys a subwoofer and says, 'Aw man, I just want a teeny bit of thump.' Naw man, you want something that kicks you in the chest, but you need a box that's gonna put up with it. That's where Belva comes in. While other brands use less-than-optimal 1/2-inch MDF, we've got 3/4-inch MDF to make sure you get all the bass you can handle. Why risk a busted box? Belva's the obvious choice when it comes to giving your sub a good home and giving you the low end you're looking for.
(newest, current model)
(previous model, replaced by JL Audio 10W1v3-4 10" Subwoofer + Free 10" Sealed Enclosure and Speaker Wire)
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
10W1v3-4, MDFS10, BBSW127
Internal Product ID:
Could have a better way to decide which wire to use as positive or negative. Only has spaced print on one wire.
Belva est une marque qui se rapproche de la marque stinger a premiere vue.bon produit.
Great box for the $.
Dropped a RF prime In and sounds great. Well built. Great value.
Decent Small Box
For the money it is a pretty good product. The carpet is a nice black. Very dark and very clean. The box is solid and can take a beating. The terminal cup is nice as its a binding post and not those crappy pressure tabs. Good box, decent sealing, good carpet.
Not much can really be said about a sub enclosure, other than it does its job well. My Rockford Fosgate P1S2-10 fit in snuggly. The only thing that was a tad iffy was that when drilling once the bit went through it would catch of the inside insulation and mess it up, but quite honestly it didn't really bother me at all. Good enclosure.
I totally recommend this product, excellent value! super fast shipping
Box is well built, its hard to mess up building a small sealed box.. The only problem was sub opening wasn't large enough for my sub, 5 minutes with a jigsaw and vacumn took care of that though..
Sturdy, fits like a glove not too big, not too small either. Can't make it for the amount they sell it.
This is some great speaker wire looks good works good and you get so much for so cheap
Quality at a great price
I got this box for an Earthquake dbxi10 and thankfully the sub fit right in despite me thinking the measurements for the cutout were a bit off. The little bit of polyfill lining is a nice touch. The box felt secure and solid with a good bit of weight for the quality of wood. It definitely didn't feel like a cheap particle board box. The carpeting was on snug and looked good as well. Great pre-fab box for your sub. I expect it to last but can't say for sure as I just got it in recently.
Best selling similar products
• Sealed downward-firing enclosure with one CompRT 12" subwoofer and passive radiator
• 3/4" medium-density fiberboard construction covered with carpet
• 2-ohm total impedance
• Power Handling: 500 watts RMS (1000 watts peak power)
• Sensitivity: 98 dB
• Frequency Response: 25-500 Hz
• Dimensions: 27-1/2"W x 14-5/8"D x 6-1/8"H
• 700 watts Watts Peak
• 350 watts Watts RMS
• Carbon Fiber Reinforced Polypropylene Cone
• Butyl Rubber Surround
• Includes Depth Extension Clearance Plate
• Includes Sealed Enclosure
• 12" Solo-Baric Subwoofer in Thin Profile Enclosure
• RMS: 600W / Peak: 1200W
• Square Sub Design Moves 20% More Air Than Round Subwoofers
• Easily Mounts Under or Behind a Seat
• Advanced internal bracing
• Ribbed Santoprene Surround Resists Heat And Degrading
• Peak Power: 800 watts
• RMS Power: 200 watts
• Polypropylene Cone
• Rubber Surround
• Impedance: Single 2 or 4 ohms
• Includes Sealed Truck Enclosure
• 400 watts Dual 12" Sealed Subwoofer Enclosure
• Single 4 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 11-1/8" TD x 13-1/2" BD x 29-11/16" W x 14" H
Save up to 10 different vehicles in your garage