Includes 10" 500W RMS Subwoofer, Custom Box & Mounting Hardware
Product highlights
• Custom Bass Enclosure for select Ford Focus Hatchback vehicles
• Powerful NVX VSW102v2 Subwoofer
• Hand-Laid Fiberglass Enclosure
• Fits In the Trunk Storage Cubby (Right Side)
• Add 500 Watts RMS of Bass to Your Ford Focus
Our BOOST enclosures were painstakingly designed by our in-house engineers to combat the lack of rich and deep bass commonly associated with the factory sound system. Whether you have a Tesla Model S or a Chevrolet Corvette C6 Coupe, you will get to experience bigger and better bass. Each of our enclosures come equipped with NVX’s top of the line subwoofers, so you know your enclosure will bring the noise.
The NVX BOOST subwoofer enclosures work with what you already have in your car, especially with an aftermarket stereo. No need to purchase any other speakers, subwoofers, or other parts. You can buy either the BOOST package by itself or purchase the entire kit which includes an amplifier, amplifier wiring kit, and lineout converters.
Our BOOST series of subwoofers offer a simple and seamless installation fitting in your trunk. Each one of our BOOST subwoofers comes with a step-by-step guide on how to install it. You can also check out our website for more information about your BOOST Subwoofer
As mentioned earlier, we offer the complete BOOST package for your DIY installation. The BOOST package gives you everything you need to upgrade the bass in your vehicle. To learn more about how to install your own BOOST box, check out our video on the topic here.
2012-2018 Ford Focus - Custom 10" Subwoofer Enclosure owner’s manual
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Internal Product ID:
181977
| 5 star |
|
67% |
| 4 star |
|
33% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Good for what it costs
Bought this for my 2017 focus st3 to replace the weak factory sub. I paired it with a with the NVX xad12 which is 500w rms at 4ohm. The sub sounds good but is not as loud as I expected it to be, but I did do the installation myself and haven't tuned the amp right yet. My only issue with this amp is the mounting bracket that comes with it is super soft, and it doesn't feel very secure. So I had to add a bungee cord to keep it from moving. The mounting is the only reason I give it 4 stars in design and durability, because it really needs to have 2 mounting points.
Verified purchase
37
found this helpful.Factory finish, not factory fit
The sub itself is fine, but the enclosure is not well designed at all. Like other reviews mentioned online, the insert on the rear of the box is threaded to go on the 6mm bolt attached to the side of the trunk. Only issue is there's no way to thread a stationary nut onto a stationary bolt. I had to drill out said nut and use a long nutsert to fully reach the threaded post.
Additionally, the box itself has lots of glue around the corner of the carpeting which is quite unsightly.
The instructions (available online, not in the box) also mentioned some extra hardware that was not included. Not sure how that could have resolved the rear nut/post issue, but everything that was necessary for the other mounting point was in the box.
Verified purchase
24
found this helpful.Great Setup For Factory Location
I was originally going to get this along with the nvx line converter and amp package but decided to get those first in an attempt to see what the factory sub could do. Massive mistake! Immediately ordered this to replace that horrible thing and i wish i got this with the package from the get go. Install was a breeze and i was up and running within 30 mins, nice accurate and deep bass. Mounting bracket seems chincy but once you get the nut to the fenderwell tight the thing will not move. Very impressed.
Verified purchase
24
found this helpful.Best selling similar products
2006-2013 Chevy Corvette C6 - Custom Fit 10" Subwoofer Box | NVX BE-GM-VETC6
• 300W Single 10" Sealed Subwoofer Enclosure with Built-In Subwoofer
• 10" NSW Series Subwoofer
• Enclosure Constructed of hand-laid fiberglass with Painted and Carpeted Finish
• Final Impedance: 2 ohms
• Frequency Response: 20-200 Hz
$399.99
2017-Up Tesla Model 3 - Custom 10" Subwoofer and Box | NVX BE-TM3-VSW10S2
• Custom Bass Enclosure for select 2017-2024 Tesla Model 3
• Powerful NVX VSW104v2 Subwoofer
• Hand-Laid Fiberglass Enclosure
• Fits In the Storage Cubby On the Left Side of the Trunk
• Add 500 Watts RMS of Bass to Your Tesla
$449.99
2020-Up Tesla Model Y - Custom Fit 10" Subwoofer Enclosure | NVX BE-TSLAY-G1P
• Custom Bass Enclosure for 2020-Up Tesla Model Y
• 5-Seat Model Only
• Powerful NVX VSW104v2 Subwoofer
• Hand-Laid Fiberglass Enclosure
• Fits In the Storage Cubby On the Right Side of the Trunk
• Add 500 Watts RMS of Bass to Your Tesla
$449.99
2010-2015 Toyota Prius - 10" Subwoofer Enclosure | NVX BE-TOY-PRIG3-NSW104V2
• Custom Bass Enclosure for select Toyota Prius
• Powerful NVX NSW104v2 Subwoofer
• Hand-Laid Fiberglass Enclosure
• Fits In the Storage Cubby On the Left Side of the Trunk
• Add 200-350 Watts RMS of Bass to Your Prius
$349.99
2020-Up Tesla Model Y - Custom Fit 10" Subwoofer Enclosure | NVX BE-TSLAY-G1D
• Custom Bass Enclosure for 2020-Up Tesla Model Y
• 5-Seat Model Only
• Powerful NVX VSW104v2 Subwoofer
• Hand-Laid Fiberglass Enclosure
• Fits In the Storage Cubby On the Left Side of the Trunk
• Add 500 Watts RMS of Bass to Your Tesla
$449.99
