Simple plug and play installation, no cutting required
Product highlights
• Peak Power: 240W Each
• RMS Power: 80W Each
• 2-Way Coaxial
• 4 ohm Impedance
• Polypropylene Cone Material
• Nitrile Butadiene Rubber Surround
• 20mm Silk Dome Tweeter
Don’t just replace your speakers – upgrade them! At NVX, we set out to build an affordable speaker solution for audio enthusiasts on a budget; although priced to compete with other “entry-level” speakers on the market, the N-Series offer sound quality and reliability which blows the competition out of the water. The materials and designs used in the N-Series were carefully selected to provide the best possible performance.
The speaker utilizes an integrated filter network, which makes installing these speakers as simple as connecting the wires and mounting them to the door. N-Series is available in 3-1/2”, 6-1/2”, 4”, and 5-1/4” round models, and 4”x6”, 6”x8”, 6”x9” oval models. So if you’re in the market for a speaker that’s more about thrills than frills, look no further than our N-Series Speakers!
Our speakers are designed with durability and sound quality in mind without having to break the bank. The polypropylene cone material is strong, yet lightweight for accurate mid and low tones. The Nitrile Butadiene Rubber Surround supports the smooth, linear movement for optimal accuracy. The Stamped Steel Basket Provides a strong, sturdy foundation for a durable and long-lasting speaker. The High-Temperature KSV Voice Coil provides superior current distribution with effective heat dissipation. All these materials combined make for a powerful line of speakers.
One of our favorite features in the N-Series Speakers is the amazing tweeters. The rich treble in our speakers are reproduced with stunning warmth and smoothness thanks to the 20mm silk dome tweeters. This material is usually reserved for premium component systems, however we are offering this feature in our pocket-friendly speakers.
NVX NSP525
240W Peak (160W RMS) 5.25" N-Series 2-Way Coaxial Car Speakers with 20mm Silk Dome Tweeters
Quantity: 1
Priced Per Pair
Check out the NSP525 Owner's Manual 
Metra 72-7800
Install New Speakers in select 1982-2025 vehicles from Honda, Acura, Isuzu
Quantity: 1
Sold as Pair
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
This product is temporarily out of stock. May we recommend...
• 120 watts Peak Each, 50 watts RMS Each
• Compatible with select 2002-2025 vehicles from Ram, Toyota, GMC
• Silk Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 83 dB
(1)
$99.99
List price $100.00
• Includes two 6.5" convertible speakers, one loaded 10" subwoofer enclosure, 2 amplifiers, one remote bass knob, and vehicle-specific harnesses and brackets
• Compatible with 2011-2018 Jeep Wrangler Unlimited, Wrangler Unlimited (JK)
• System is designed to withstand harsh outdoor environments
• Plug and Play design for easy installation
• Comes with all necessary mounting and installation hardware
(2)
$1699.95
List price $1900.00
• Peak Power: 100 watts per channel
• Two 4" long excursion woofers
• 2" high-output tweeter per channel
• IPX6 waterproof and splashproof rating
• Mounting clamps, inserts and quick release brackets included
$154.99
List price $499.99
• Includes four 6.5" loaded speaker enclosures, one pair of tweeters two loaded subwoofer enclosures, two marine amplifiers, one digital signal processor, and vehicle-specific harnesses and hardware
• Direct fit for a hassle-free installation, fitting perfectly into select 2020-2023 Jeep Gladiator for seamless integration
• System is designed to withstand harsh outdoor environments
• Plug and Play design for easy installation
• Comes with all necessary mounting and installation hardware
$4499.99
List price $4499.99
• Peak Power: 100 watts Each
• RMS Power 50 watts Each
• Mylar Dome tweeters
• Polypropylene cone
• Impedance: 4 ohm
• Sensitivity: 86 dB
$299.95
List price $329.99
• Includes two front speakers, two rear soundbar speakers, one amplified subwoofer, one 4-channel amplifier, mounting brackets and wiring harnesses
• Direct fit for a hassle-free installation, fitting perfectly into the select 2018-2023 vehicles from Jeep for seamless integration
• System is designed to withstand harsh outdoor environments
• Plug and Play design for easy installation
• Comes with all necessary mounting and installation hardware
$1999.95
List price $2220.00
• Peak Power: 100 watts per channel
• Two 4" long excursion woofers
• 2" high-output tweeter per channel
• IPX6 waterproof and splashproof rating
• Mounting clamps, inserts and quick release brackets included
(1)
$154.99
List price $499.99
• 225 watts Peak Each, 90 watts RMS Each
• Rear soundbar upgrade kit for select 2018-2023 vehicles from Jeep
• 1" Teteron Dome tweeters
• Polymer cone material
• Impedance: 4 ohm
• Sensitivity: 87.8 dB
(3)
$499.95
List price $550.00
• Includes four sets of midrange component speakers, one 10" loaded subwoofer enclosure, one 12-channel DSP and vehicle-specific harnesses
• Direct fit for a hassle-free installation, fitting perfectly into the 2022-Up Tesla Model 3 with Factory Base Audio for seamless integration
• Efficiently designed amp uses less than 1 mile of range per hour at full volume
• Plug and Play design for easy installation
• Comes with all necessary mounting and installation hardware
$2999.95
List price $3500.00
• 200 watts Peak Each, 100 watts RMS Each
• Compatible with [[!afgDescLink]]
• 0.75" Titanium Dome tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
(1)
$179.99
List price $189.99
Manufacturer:
Model Number:
86-91-honda-civic-spkg
Weight:
3.29lbs
Internal SKU:
86-91-honda-civic-spkg
Internal Product ID:
190151
| 5 star |
|
90% |
| 4 star |
|
10% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Wife's Honda Crv
I ordered these speakers for her CRV was recommended by West the sales rep. Nvx NSP525 two sets they sound great. Ready to the order the 61/2 for my car. I recommended this product and the reps are nice and know.
116
found this helpful.Great product
These speakers look great and are very easy to install. Sound great too
108
found this helpful.Great Backfill
I purchased these to use as backfill in my NVX system and I am pleased to report that they have met my expectations to a T. They are plenty clear, and handle the power I am throwing at them very well. Like most speakers of this size and design they are limited by how much bass they can produce, but for rear fill in a system they are perfect. My kids say this is a huge improvement over the Bose speakers they replaced.
104
found this helpful.Nvx speakers
I recommend the nvx speakers worth every penny can't go wrong
98
found this helpful.perfect for Harley bagger upgrades
I have 4 of these running off my JVC head unit and they are plenty loud for the highway plus my loud exhaust on the bike overall love them and will be using them on all my bikes from now on
80
found this helpful.OK, but...
These fit the Honda factory wiring harness perfectly. They worked for the front AND the rear deck speakers in my Accord. However, be aware that the female spade connectors are probably not large enough to fit higher-end speaker terminals. You may have to solder larger connectors on, or just solder the wires directly to the speaker terminals like I did. Either way, you don't need to cut into the factory harness - which is nice.
77
found this helpful.Excellent Product
Perfect, secure and seamless fit into the factory speaker harness. No reduction in power or sound quality when used. Excellent product.
77
found this helpful.Highly recommended!
I bought 2 pairs of these for my aftermarket speakers for my 2008 honda civic. I just plugged it in and connected the two terminals to my speakers and voila! I'm all set. You won't make a wrong connection since the two terminals are different in size which most aftermarket speakers have and most importantly, cutting wires is eliminated.
76
found this helpful.Very simple and quick
This made speaker install very easy, just slip over connections on speaker and clip into OE harness. They are sized to only fit one way so you can not wire speakers out of phase.
74
found this helpful.Great time saver!
I purchased this product because I was looking for a easy speaker install. This item did just that...it made life real easy. Snapped the wires together and I was done. It cost a bit more than I thought it should but it saved me a lot of time and headaches. I would recommend this to a friend.
72
found this helpful.
