300W RMS Punch Series Monoblock Class AB Car Power Amplifier + Belva BAK82
• RMS: 200W x 1 @ 4 ohms, 300W x 1 @ 2 ohms
• Total RMS Power: 300W
• Built-in NOMAD Circuit Protects Amplifier
• Tuned Bass EQ: 0 to +18 dB
• Cast Aluminum Heatsink with Dynamic Thermal Management
• Dimensions: 9-7/8"L x 7-3/4"W x 2-3/8"H
Rockford Fosgate Punch P300X1
444W Peak (300W RMS) Punch-Series Class-AB Monoblock Amplifier
Quantity: 1
Belva BAK82BL
8 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 600 Watts - BLUE
Quantity: 1
Manufacturer:
Model Number:
P300X1, BAK82BL
Weight:
11.00lbs
Internal SKU:
p300x1_bak82
Internal Product ID:
193255
Rockford Fosgate never disappoints
These amps are pricey, but totally worth every penny, they are conservatively rated and produce deep, ear ringing bass. My birth sheet states its pumping out 252 watts @ 4ohms and 437 watts @ 2ohms. I know plenty of people will say they're not 1ohm stable, but i beg to differ, im running two digital designs 510b's in parallel and the amp barley gets warm when i crank it hard. I like the l.e.d clip indicator, it also comes with the "c.l.e.a.n" CD ROM so you set your gains and volume level correctly, thus preventing clipping, which can burn up your woofers coils easily. One star taken away because i HATE the new removable front panel to access your gain controls.
49
found this helpful.got decent power
Had it on two p1-10s in ported box 1.25 cu each pushed them good but subs r another story. Clipping indicator is nice n amp has a sleak look. For $160 it doesnt feel that powerful. The pioneer 800.1 has more balls or even the soundstream rubicon 1000.1 etc. both have double or more power for about the same $$. Overall its a good lil amp if u dont mind paying the money.
44
found this helpful.Awesome
Pushed 2 P1's with this amp and it does an awesome job. Installed it in a neighbors Dodge Ram. He loves it and I can hear him coming down the road while in the house :)
43
found this helpful.GREAT AMP..FOR A LITTLE AMP.!!
I hookup this amp with 2 12's Rockford Fosgate R1 subs with a sealed custom box..man those subs hit hard with this bad boy i highly recomended.!!
40
found this helpful.Solid Performance!
Great amp for the value. Very easy to properly tune and was working quickly. Gives my subs great power and is actually pushing 450 watts RMS not 330 according to the birth sheet in the box.
Cons: Amp is supposed to turn on w/o a remote wire if wired with high level inputs (no RCA cables), but it DOESN'T WORK!!!!
Amp says if accepts high level inputs, but leaves out you HAVE TO BUY an ADDITIONAL piece for it to work.
Also the amp overheated on me while I was driving.. This only happened 1 time and it was about 95 degrees out, probably hotter in the trunk.
40
found this helpful.Cheap kit that did it's job
Inexpensive kit that works great for the 300 watt amp I'm running.
25
found this helpful.Great value
Worked great for the system I installed. It came with everything to complete the project. Sonic has great service and fast shipping.
24
found this helpful.Great deal
Worked great for a 240 watt amp powering 4 6x9's in a custom built enclosure
23
found this helpful.Belva BAK82BL (Blue) Review
Overall this was a pretty good kit for the money. The one downside was I was missing the following and had to go out and buy these to finish my install.
One black rubber firewall grommet
One 8 Gauge Blue chrome plated ring terminals
One 8 Gauge Black chrome plated ring terminal
Three 18 Gauge Blue Spade terminal
Two 18 Gauge Black Spade terminal
One 18 Gauge Red butt connector
Ten 4" Black zip ties
23
found this helpful.AMP. KIT
VERY GOOD QUILTY PRODUCT AND HAD ENOUGH WIRE FOR PROJECT
21
found this helpful.Best selling similar products
Alpine MRV-M500 with Amplifier Wiring Kit
• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 500W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Includes Amplifier Wiring Kit
(63)
$164.95
NVX VAD17001 with Amplifier Wiring Kit
• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Includes Amplifier Wiring Kit
(55)
$249.99
Kicker 46CXA4001 with Amplifier Wiring Kit
• 150 Watts RMS x 1 @ 4 ohms
• 300 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Includes Amplifier Wiring Kit
(33)
$171.89
NVX XAD21 with Amplifier Wiring Kit
• 250 watts x 2 channel @ 4 ohms
• 550 watts x 2 channel @ 2 ohms
• 1000 watts x 2 channel @ 1 ohm
• Total RMS Power: 2000 watts
• CEA-2006 Compliant
• Includes Amplifier Wiring Kit
(88)
$257.61
NVX NBA201 Amplifier with Amplifier Wiring Kit
• 200 watts x 2 channel @ 4 ohms
• 350 watts x 2 channel @ 2 ohms
• Bridged: 1400 watts x 1 channel @ 4 ohms
• Total RMS Power: 700 watts
• CEA-2006 Compliant
• Includes Amplifier Wiring Kit
(33)
$139.99
Save up to 10 different vehicles in your garage