360W Peak (120W RMS) 6.5" GTO Series 2-Way 3-Ohm Coaxial Car Speakers + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
Product highlights
• 180 watts Peak Each, 60 watts RMS Each
• 1" Silk Edge-Driven Dome Tweeters
• Carbon-injected cone material
• Impedance: 3 ohm
• Sensitivity: 93 dB
The JBL GTO series speakers are the perfect upgrade to your existing speakers. They are designed with a carbon-injected cone material to accurately reproduce music the way the artist originally intended. The three ohm voice coils allow the speaker to operate at an efficient 4 ohms once they are being powered, allowing them to utilize every watt of power your head-unit or 4ohm stable amplifier can produce. These speakers feature a vented magnet with a high thermal-capable voice coil which effectively dissipates heat, ensuring the longevity of your investment. The edge-driven speaker cones allow greater sound levels with the same amount of power. The wide frequency responses that these speakers provide will leave your ears very satisfied when you're listening to your favorite songs. If quality is your goal, the GTO series speakers by JBL have the technologies to make that happen.
JBL GTO629
360W Peak (120W RMS) 6.5" GTO Series 2 Way Full Range Coaxial 3-ohm Speakers
Quantity: 1
Priced Per Pair
NVX XBAF65
2 Piece 6.5" or 6.75" Weatherproof Silicone Rubber Speaker Baffle Kit
Quantity: 1
NVX SDBSK2 Premium Stealth Black
Premium Sound Damping (Sound Deadening) Speaker Kit, two 10" x 10" Sheets (91mil THICK)
Quantity: 1
NVX SDRLR2
Universal Professional Heavy Duty Roller for Sound Damping (Sound Deadening)
Quantity: 1
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers (Belva BTK106)
Six Piece Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs
Quantity: 1
|
(newest, current model)
|
|
(previous model, replaced by JBL GTO629 with Speaker Installation Kit)
|
|
(previous model, replaced by JBL GTO628)
|
Best selling similar products
Deaf Bonce AP-M61AC with Sound Damping
• 360W Max Power
• 180W RMS
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 101.60 dB
• Mounting Depth: 3.18"
$174.89
MB Quart PS1-216 with Installation Accessories
• 120 watts Peak Each, 60 watts RMS Each
• 1" Magnesium Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 88.9 dB
$212.99
Kenwood eXcelon KFC-XP184C with Sound Damping
• 280 watts Peak Each, 80 watts RMS Each
• 1" Silk Soft Dome tweeters
• Injection Molded Polypropylene - IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 86.3 dB
$213.99
Deaf Bonce APM61SE with Sound Damping
• 260W Max
• 130W RMS
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 101.5 dB
• Mounting Depth: 2.83"
$124.89
Deaf Bonce MM-60NEO V2 with Sound Damping
• 200 watts Peak Each, 100 watts RMS Each
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 95 dB
$99.89
Kicker CSC693 (46CSC6934) with Sound Damping
• 450 watts Peak Each, 150 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
$144.98
Kicker CSC35 (46CSC354) with Sound Damping
• 90 watts Peak Each, 30 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material with EVC (Extended Voice Coil) technology
• Impedance: 4 ohm
• Sensitivity: 88 dB
$74.98
Deaf Bonce AP-M67AN with Sound Damping
• 600 watts Peak Each, 300 watts RMS Each
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 102 dB
$464.89
JBL Stadium 62CF (JBLSPKSD62CFAM) with Sound Damping
• 330 watts Peak Each, 110 watts RMS Each
• 3/4" Aluminum Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 93 dB
$424.94
Alpine SXE-1751S with Sound Damping
• 220 watts Peak Each, 40 watts RMS Each
• Mylar/Titanium Hybrid Balanced Dome Tweeters
• Long Fibre Natural Pulp Cone cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
$61.98
Manufacturer:
Model Number:
GTO629, XBAF69, SDSK2, SDRLR1, BTK106
Weight:
10.75lbs
Internal SKU:
gto629_acc_kit
Internal Product ID:
197560
| 5 star |
|
84% |
| 4 star |
|
12% |
| 3 star |
|
2% |
| 2 star |
|
0% |
| 1 star |
|
1% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Awesome product
I just installed 4 of these powered by a Hifonics x400.4. These speakers sound awesome, they brought tears to my eyes! and they take almost all the power the amp can give! I am extremely happy with these. The screws they give you require a 3mm allen head and I didnt see one. I got two speakers installed before I realized they give you a 3mm bit for a screwdriver!
107
found this helpful.Apparently, one size does not fit all 6.5" speakers...
Unfortunately, I cannot give a review on the product's performance as I was unable to use it in the manner for which it was manufactured due to incompatible size issues. The speakers I have are the CVMPCL6.5 - 6.5" STROKER PRO 200W Midrange Gold Speakers. Pairing these speakers with the NVX XBAF65 Speaker Baffle Ring Kit spawned two issues:
1) The mounting depth for the baffles is 2-5/8" (2.625 inches), whereas the mounting depth for the speakers is 2.930 inches. This minor difference was seemingly insignificant until the second issue reared its ugly head.
2) The width of the baffles is much too small for my speakers. I can't seem to find information on the exact dimensions of the baffles as I have not yet contacted NVX. But the width (diameter) of my speakers is < 5.76 inches. This is obviously too wide for the baffle because the baffle would not go on without a fight. I pulled, tugged, stretched, and strained nearly damaging the speaker. I then decided to make a few modification cuts to the baffle to accommodate the sheer width of the speaker, but the result was a shredded baffle and a traumatized speaker.
Now I'm stuck with three unusable baffles because I bought two pair!
Regarding speaker width, the CVMPCL6.5 - 6.5" STROKER PRO 200W Midrange Gold Speakers have unremovable hardware tabs attached to them that I can only assume are there to somehow protect the speaker leads. They stick out from the speaker basket making it impossible to properly install the baffle and, in turn, causing the magnet to protrude out of the base of the baffle a lot farther than it would have if the baffle were wide enough.
Regarding the attached photos, the unmodified baffle from the first pair was used to demonstrate the issue.
Attachment: Photos
**** VENDOR RESPONSE ****
The XBAF65 are made for nearly all 6.5" speakers. The Cerwin-Vega pro midrange seem to be the culprit as their depth and basket are atypical.
We will do our best to come out with a new, larger "oversized 6.5" version and name it XBAF675. It will take us some time to tool and come out with it, but hope you enjoy the feedback.
Verified purchase
94
found this helpful.Door Speakers - Great Value
I bought these for my step son for a Christmas gift and he really loves them. The quality is great the shipping was fast and the speakers were perfect just what he wanted. Also to mention the prices were awesome...
92
found this helpful.Foam vs Rubber
The best thing about these speaker baffles are the fact that they are rubber vs the easy to find foam. They definitely add a nice level of water resistance with the rubber. Not to mention the sound quality improvement. It's seriously a night and day difference. Trust me, just buy them!
85
found this helpful.Protect Your Purchase
I like these baffle rings because it gives that added protection for my mid-bass component from any water that may slip through the window sill. It also helps with reducing any unwanted vibration noise. The egg crate foam placed behind the speaker on the inner lining of the door helps absorb waves to add more decrease in vibration.
The silicone-rubber material is going to last a long time and can be easily trimmed for a custom fit.
Verified purchase
71
found this helpful.But them a must have
I makes sound project forward and also gives piece of mind of some possible water resistance........ A must have for better sound quality
Verified purchase
70
found this helpful.Don't fit
I ordered these speakers for a 2005 tundra which according to your guide were the correct replacements for factory system. The mounting brackets don't fit. I had to order a after market bracket from you and when I get it I'll let you know if it works.
81
found this helpful.Work good, good product
they work well. just make sure your on the spot before you stick the foam on because it is sticky.
68
found this helpful.absolutely perfect!
highly recommend for a clean speaker install. helps keep from losing mid-range sound.
Verified purchase
67
found this helpful.Helps doors
Great baffles to help the high powered door speakers bang
Verified purchase
66
found this helpful.
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
