Includes In-Dash Car Stereo, Dash Kit and Harness
• Single DIN In-Dash MP3/USB Car Stereo Receiver
• 50W x 4 Chan. MAX
• 3 Sets of 5V Preamp Outputs
• Built-in Bluetooth for hands-free and audio streaming
• Front AUX, USB, & SD Card Inputs
• Vehicle Specific Dash Kit and Wire Harness Included
• Note: For Amplified Models
The Belva BDMRS5 is equipped with Bluetooth connectivity. This allows the user to make and receive phone calls wirelessly without distracting the driver. Bluetooth connectivity also allows the user to stream music and other media from a cellphone directly to the stereo itself. This means that you can sift through your playlist without taking your eyes off of the road.
The BDMRS5 also features three sets of 5-volt preamp outputs which allow the stereo to be wired to your car’s audio system. The BDMRS5 features a dedicated preamp output for your car’s front and rear speakers and a subwoofer for the sound that is not only clear but is also balanced throughout your vehicle. Having dedicated outputs for each allows you to make individual adjustments to each part of your system. Therefore, you could easily adjust something like the bass of your subwoofer without altering the bass for your front and rear speakers.
The BDMRS5 is equipped with front USB inputs. This feature enables the connection of flash drives, media players, and charging cables to the unit itself for direct access to your media. The BDMRS5 also includes a front microSD slot which allows you to access media stored on a microSD card. Finally, this unit also features a front panel 3.5mm auxiliary headphone jack which can connect to any media device featuring a 3.5mm auxiliary cable.
Belva BDMRS5
Single DIN Digital Media Receiver with Bluetooth, Front SD, USB, AUX Input and 5 Volt Preamp Outputs
Quantity: 1
Metra 99-5027 Dash Kit
Install a new Single-DIN car stereo in select 1995-2011 vehicles from Ford, Mazda, Mercury (Black)
Quantity: 1
Metra 70-5521 Wiring Harness
Install a new car stereo and retain factory amplifier in select 2003-2013 vehicles from Ford, Lincoln, Mercury
Quantity: 1
Axxess AFDI-5V
12 Volt to 5 Volt Step Down Converter for Select Ford Vehicles with Factory Amplified Systems
Quantity: 1
Manufacturer:
Model Number:
BDMRS5, met-995027, met-705521, afdi5v
Weight:
3.79lbs
Internal SKU:
04-for-mus-sda
Internal Product ID:
198100
It restored the deep bass to my SUV...
Metra harnesses are great quality harnesses. There is a reason that they are the first choice of a vast majority of pro installers. While I'm not a pro, I am quite proficient in the realm of audio installations and I too prefer metra products(although on occasion I have used scosche products as well). This harness includes, besides the interface from aftermarket head unit to the stock vehicle harness, the harness to put the stock sub and amp back into your system when installing an aftermarket head unit. If you already have an aftermarket head unit and just need to integrate the stock sub into your aftermarket system, metra makes a harness for that purpose as well(as I found out after I ordered this harness) and the model number of that harness is 70-5522. Either way, you really can't go wrong and this harness will get the job done and help you to install your aftermarket system with no cutting required to the stock harness. A caveat with the stock sub interface, tho. Be sure to also either install a ready made 12v to 5v inline converter on the remote turn on line, or, if you are aptly capable, install a 7805 regulator should you have one laying around(this was the route I took because I actually did have one laying around). The reason for this is to avoid a loud pop when turning on the amp because of a voltage mismatch between the common remote lead of most systems and the remote lead in on the stock amp.
36
found this helpful.Stops the Pop!
Easy to install and stopped the annoying "thump" when the radio was turned on
35
found this helpful.Sonic saved us
My sisters fiance has an 04 f150. About a year ago when him and my sister came down from washington i took him to a local audio shop and he got a jvc 7 inch touch screen installed. We later found out that the factory sub no longer worked, went back to the shop and asked them to fix it. They said it would take 45 minutes (my sister didn't want to wait nor did her fiance). This last week they were down again and still no subwoofer. So i came to Sonic and got this harness. Pulled out the deck, hooked it up in about 15 minutes and wahh lahh. The sub worked again, without sonic we would have bought an amp wiring kit, and a new amp.
27
found this helpful.1SG SETTLE
This piece was very easy to use and it took a lot of work out of the job I used it in a Mustang none of the colors were right but with this kit it really made it easy I highly recommend it
25
found this helpful.Does its job
I read about people having loud noises from their sub when they installed aftermarket radios. I decided to be pro-active and bought this item before installation. I haven't heard a loud noise from the subwoofer so far, so must be doing its job!
26
found this helpful.Seamless
This is what you need for your Ford 2005 Mach system (with subwoofer). Was worry about installation, but worked out perfect. The Sub does "POP" due to the 12V antenna from head unit. I hear you need a 5V conversion to solve this problem. Doesn't bother me now.
25
found this helpful.Super Easy
If you can match colors then you can hook up you radio in under 1 hour. I had to cut the wire covers a bit longer to wrap them befor clamping. All wires were labled also. Simple.
25
found this helpful.no more popping
Installed product to keep sub from popping when radio turned on. Works like it's supposed to. No more popping.
24
found this helpful.Perfect Fit!
This product was a great fit and simplified my do-it-yourself installation by making an easy connection/fit between the after market stereo wiring and the stock stereo harness. The only thing that would have made it perfect would be if the harness had the two orange wire dimmer connector that both the stock harness and after market stereo had. The dimmer switch on stereo face doesn't work because of this but the front still lights up and looks great. The team at Sonic included everything i needed.
24
found this helpful.Great product
This product was exactly what I expected
and fixed the problem that I had with the noise that my truck stereo speaker made when I turn it on,
21
found this helpful.Best selling similar products
• Custom Fit Bluetooth Digital Media Receiver
• 7" Capacitive Touchscreen Display
• Apple CarPlay and Android Auto Compatible
• 3 sets of 4 volts preamp outputs
• 13-band graphic equalizer
• SiriusXM Satellite Radio Ready
• IPX5-Rated for water resistance
• LED Dash Indicators
$999.99
• Custom Fit Bluetooth Digital Multimedia Receiver
• 9" TFT-LCD Display Display
• Apple CarPlay and Android Auto Compatible
• 3 sets of 4 volts preamp outputs
• 13-band Parametric
• SiriusXM Satellite Radio Ready
• Splash-proof and dust-proof touchscreen and bezel (IP53-rated)
(1)
$2399.95
Stinger RB10JW18B Jeep Package
• Custom Fit Bluetooth Digital Multimedia Receiver
• 10" Capacitive Touchscreen Display Display
• Apple CarPlay and Android Auto Compatible
• Three sets of 4 volts preamp outputs
• 15-band EQ with Date Time Alignment
• SiriusXM Satellite Radio Ready
• Store up to six time correction presets
$1199.00
• Custom Fit Bluetooth Digital Multimedia Receiver
• 10.1" TFT Active Matrix Display
• Wireless Apple CarPlay
• Wireless and wired Android Auto Compatible
• Built-in Navigation
• Three sets of 3 volts preamp outputs
• 9-Band Parametric Equalizer
• SiriusXM Satellite Radio Ready
• Smartphone screen-mirroring
$749.99
Dynavin D8-PS-B-MOST-32GB (Black)
• Custom Fit Bluetooth Digital Multimedia Receiver
• 7" Capacitive Touchscreen Display
• Apple CarPlay and Android Auto Compatible
• Built-in Navigation
• Three sets of 3 volts preamp outputs
• 9-band parametric Equalizer
• SiriusXM Satellite Radio Ready
• Smartphone screen-mirroring
$899.99
Save up to 10 different vehicles in your garage