600W Peak 6.5" 2-Way Component Speaker System + 6x9" Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
Product highlights
• 300 watts Peak Each, 150 watts RMS Each
• 1" Neo-Mylar Soft Dome Tweeters
• Silver alpha-cellulose poly cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
ATS series speakers are available in the most popular sizes to fit into factory speaker locations with very little or no modification. They are perfect for the first car or a full restoration. They are designed to easily disappear into the stock speaker locations and behind factory grills but, the ATS speakers deliver huge sound. The Autotek full-range speakers are packed with technology to deliver great music, no matter what is loaded into you CD player or mobile device. Look closely for durable moisture-resistant foam speaker surrounds, bass enhancing polypropylene cones, and super output neo-Mylar soft dome tweeters. ATS speakers will not bust the bank either which means great sound at a great price.
Autotek ATS65C
600W Peak (300W RMS) 6.5" ATS Series 2-way 4-ohm Component Speaker System
Quantity: 1
Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.
NVX XBAF65
2 Piece 6.5" or 6.75" Weatherproof Silicone Rubber Speaker Baffle Kit
Quantity: 1
NVX SDBSK2 Premium Stealth Black
Premium Sound Damping (Sound Deadening) Speaker Kit, two 10" x 10" Sheets (91mil THICK)
Quantity: 1
NVX SDRLR2
Universal Professional Heavy Duty Roller for Sound Damping (Sound Deadening)
Quantity: 1
Five Piece Installer Panel Removal Tool Kit for Car Stereo/Audio (Belva BTK105)
Five Piece Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs
Quantity: 1
Stop wrapping screwdrivers in electrical tape and hoping for the best. If you want to make your next installation smooth, and keep your interior immaculate, pick up a set of these Belva BTK105 Panel Removal Tools.
This set of nylon plastic tools make your job easier when it comes to pulling off those interior pieces, but it also keeps you from marring your finish. When you're done with the job, no one will know you ever pulled anything off in the first place. Make your next audio improvement a cinch with the Belva BTK105 Panel Removal Tools.
Best selling similar products
Kicker CSC68 (46CSC684) with Sound Damping
• 225 watts Peak Each, 75 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters with neodymium magnets
• Polypropylene cone material with EVC™ (Extended Voice Coil) technology
• Impedance: 4 ohm
• Sensitivity: 90 dB
(50)
$91.95
List price $118.73
Hertz SV 200.1 with Sound Damping
• 500 watts Peak Each, 250 watts RMS Each
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 100 dB
(40)
$334.98
List price $378.74
• 100 watts Peak Each, 50 watts RMS Each
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
(43)
$134.98
List price $162.73
Rockford Fosgate Power T1650 with Sound Damping
• 150 watts Peak Each, 75 watts RMS Each
• 1" Aluminum Dome tweeters
• Injection-molded Carbon Fiber-filled Polypropylene cone material with Vertical Attach Surround Technique (VAST)
• Impedance: 4 ohm
• Sensitivity: 88 dB
(49)
$234.98
List price $238.73
Alpine HDZ-65C with Sound Damping
• 300 watts Peak Each, 100 watts RMS Each
• 1-1/4" Carbon Composite Dome Tweeters
• Carbon Composite cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
(41)
$764.94
List price $918.74
Infinity REF607F with Sound Damping
• 180 watts Peak Each, 60 watts RMS Each
• 1" Textile Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
(42)
$134.94
List price $168.69
DS18 PRO-HY6MSL with Installation Accessories
• 300 Peak, 150 RMS
• 3" Titanium Horn Tweeters
• Paper cone material
• Impedance: 8 ohm
• Sensitivity: 93 dB
• Priced Per Each Speaker
(220)
$222.86
List price $249.61
Hertz CX 100 with Speaker Installation Kit
• 60 Watts Max Each, 20 Watts RMS Each
• Semi-pressed paper + Mica cone material
• Tetolon Tweeter dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
• Mounting Depth: 1-3/4"
(132)
$219.99
List price $316.71
Rockford Fosgate T1462 with Speaker Installation Accessories
• 90 watts Peak Each, 45 watts RMS Each
• 1" Aluminum Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 85.5 dB
(144)
$219.99
List price $292.70
JBL Stadium 962M with Speaker Installation Kit
• 150 watts Max Each, 50 watts RMS Each
• 3/4" Aluminum Dome Tweeters
• Fiberglass cone material
• Impedance: 3 ohm
• Sensitivity: 94 dB
• Mounting Depth: 1 1/8"
(97)
$219.95
List price $303.67
Internal Product ID:
198987
| 5 star |
|
85% |
| 4 star |
|
12% |
| 3 star |
|
3% |
| 2 star |
|
0% |
| 1 star |
|
1% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Apparently, one size does not fit all 6.5" speakers...
Unfortunately, I cannot give a review on the product's performance as I was unable to use it in the manner for which it was manufactured due to incompatible size issues. The speakers I have are the CVMPCL6.5 - 6.5" STROKER PRO 200W Midrange Gold Speakers. Pairing these speakers with the NVX XBAF65 Speaker Baffle Ring Kit spawned two issues:
1) The mounting depth for the baffles is 2-5/8" (2.625 inches), whereas the mounting depth for the speakers is 2.930 inches. This minor difference was seemingly insignificant until the second issue reared its ugly head.
2) The width of the baffles is much too small for my speakers. I can't seem to find information on the exact dimensions of the baffles as I have not yet contacted NVX. But the width (diameter) of my speakers is < 5.76 inches. This is obviously too wide for the baffle because the baffle would not go on without a fight. I pulled, tugged, stretched, and strained nearly damaging the speaker. I then decided to make a few modification cuts to the baffle to accommodate the sheer width of the speaker, but the result was a shredded baffle and a traumatized speaker.
Now I'm stuck with three unusable baffles because I bought two pair!
Regarding speaker width, the CVMPCL6.5 - 6.5" STROKER PRO 200W Midrange Gold Speakers have unremovable hardware tabs attached to them that I can only assume are there to somehow protect the speaker leads. They stick out from the speaker basket making it impossible to properly install the baffle and, in turn, causing the magnet to protrude out of the base of the baffle a lot farther than it would have if the baffle were wide enough.
Regarding the attached photos, the unmodified baffle from the first pair was used to demonstrate the issue.
Attachment: Photos
**** VENDOR RESPONSE ****
The XBAF65 are made for nearly all 6.5" speakers. The Cerwin-Vega pro midrange seem to be the culprit as their depth and basket are atypical.
We will do our best to come out with a new, larger "oversized 6.5" version and name it XBAF675. It will take us some time to tool and come out with it, but hope you enjoy the feedback.
Verified purchase
94
found this helpful.Foam vs Rubber
The best thing about these speaker baffles are the fact that they are rubber vs the easy to find foam. They definitely add a nice level of water resistance with the rubber. Not to mention the sound quality improvement. It's seriously a night and day difference. Trust me, just buy them!
85
found this helpful.Protect Your Purchase
I like these baffle rings because it gives that added protection for my mid-bass component from any water that may slip through the window sill. It also helps with reducing any unwanted vibration noise. The egg crate foam placed behind the speaker on the inner lining of the door helps absorb waves to add more decrease in vibration.
The silicone-rubber material is going to last a long time and can be easily trimmed for a custom fit.
Verified purchase
71
found this helpful.But them a must have
I makes sound project forward and also gives piece of mind of some possible water resistance........ A must have for better sound quality
Verified purchase
70
found this helpful.Work good, good product
they work well. just make sure your on the spot before you stick the foam on because it is sticky.
68
found this helpful.absolutely perfect!
highly recommend for a clean speaker install. helps keep from losing mid-range sound.
Verified purchase
67
found this helpful.Helps doors
Great baffles to help the high powered door speakers bang
Verified purchase
66
found this helpful.Five Piece Installer Panel Removal Tool Kit for Car Stereo/Audio (Belva BTK105)
Good for the price, could be better, does what it’s supposed to
65
found this helpful.The best speaker baffles!
Love these baffles! The rubber makes it easy to mount, you could trim them but it wasn't necessary in my case. Love the little foam circle that goes with it! Improves your sound quality for sure! After I installed these baffles, all of the sounds are being directed back into the cab, its definitely louder now and adds a little more midbass.
Verified purchase
65
found this helpful.Work great.
At the very least these create a really nice seal. The ends do fold so it will clear the door panel.
Verified purchase
64
found this helpful.
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
