300W RMS 6x9" 3-Way Car & Marine Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
Product highlights
• 450 watts Peak Each, 150 watts RMS Each
• 1" Terylene Dome Tweeters
• Titanium Coated Composite cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
|
Polk MM1 Series Speakers |
|---|
It doesn't matter whether your next destination is the road, the lake, the trails or the dunes. Polk's MM1 series speakers are built to not only withstand whatever environment they're thrown into, but to make your ears happy through all of it.
Polk's Mobile Monitor speakers are rugged and built for all kinds of outdoor settings. The IP56 ultra marine certification means all parts - the surround, the cone, the basket and everything else - can withstand dirt, dust and water without any serious side effects. They're ready for your boat, ATV or anything else designed for exposure to the elements. Add in a non-corrosive fiberglass reinforced ABS basket, and these MM1s are ready for the long haul.
Not looking for outdoor adventure? These MM1 speakers are still built to outperform your factory drivers in your daily vehicle. Check out that crossover built onto the speaker. While two- or three-way speakers have crossovers mounted on, they're not usually this robust. Add a pivoting 1" tweeter to customize your sound, oversized voice coils and more, and your next drive will sound a whole lot better. Built-in Dynamic Balance Technology helps eradicate distortion and enrich the tone.
Don't put off that sound upgrade any longer. Polk's MM1 series offers a simple solution with anything-but-simple sound. Drop a pair of these in your cart and be prepared for your next adventure.
Polk Audio MM692 (MM 692)
900W Peak (300W RMS) 6x9" Mobile Monitor Series 3-way 4-ohm Coaxial Car & Marine Speakers with Dual Tweeters
Quantity: 1
Priced Per Pair
Polk Audio MM692 owner’s manual
NVX XBAF69
2 Piece Universal 6x9” Silicone Rubber Speaker Baffles with Self Adhesive Foam Base Pad
Quantity: 1
NVX SDBSK2 Premium Stealth Black
Premium Sound Damping (Sound Deadening) Speaker Kit, two 10" x 10" Sheets (91mil THICK)
Quantity: 1
NVX SDRLR2
Universal Professional Heavy Duty Roller for Sound Damping (Sound Deadening)
Quantity: 1
Five Piece Installer Panel Removal Tool Kit for Car Stereo/Audio (Belva BTK105)
Five Piece Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs
Quantity: 1
Stop wrapping screwdrivers in electrical tape and hoping for the best. If you want to make your next installation smooth, and keep your interior immaculate, pick up a set of these Belva BTK105 Panel Removal Tools.
This set of nylon plastic tools make your job easier when it comes to pulling off those interior pieces, but it also keeps you from marring your finish. When you're done with the job, no one will know you ever pulled anything off in the first place. Make your next audio improvement a cinch with the Belva BTK105 Panel Removal Tools.
|
(newest, current model)
|
|
(previous model, replaced by Polk Audio MM692 with Installation Accessories)
|
|
(previous model, replaced by Polk Audio MM691)
|
Best selling similar products
Deaf Bonce AP-M61AC with Sound Damping
• 360W Max Power
• 180W RMS
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 101.60 dB
• Mounting Depth: 3.18"
$174.89
MB Quart PS1-216 with Installation Accessories
• 120 watts Peak Each, 60 watts RMS Each
• 1" Magnesium Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 88.9 dB
$212.99
Kenwood eXcelon KFC-XP184C with Sound Damping
• 280 watts Peak Each, 80 watts RMS Each
• 1" Silk Soft Dome tweeters
• Injection Molded Polypropylene - IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 86.3 dB
$213.99
Deaf Bonce APM61SE with Sound Damping
• 260W Max
• 130W RMS
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 101.5 dB
• Mounting Depth: 2.83"
$124.89
Deaf Bonce MM-60NEO V2 with Sound Damping
• 200 watts Peak Each, 100 watts RMS Each
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 95 dB
$99.89
Kicker CSC693 (46CSC6934) with Sound Damping
• 450 watts Peak Each, 150 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
$144.98
Kicker CSC35 (46CSC354) with Sound Damping
• 90 watts Peak Each, 30 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material with EVC (Extended Voice Coil) technology
• Impedance: 4 ohm
• Sensitivity: 88 dB
$74.98
Deaf Bonce AP-M67AN with Sound Damping
• 600 watts Peak Each, 300 watts RMS Each
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 102 dB
$464.89
JBL Stadium 62CF (JBLSPKSD62CFAM) with Sound Damping
• 330 watts Peak Each, 110 watts RMS Each
• 3/4" Aluminum Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 93 dB
$424.94
Alpine SXE-1751S with Sound Damping
• 220 watts Peak Each, 40 watts RMS Each
• Mylar/Titanium Hybrid Balanced Dome Tweeters
• Long Fibre Natural Pulp Cone cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
$61.98
Manufacturer:
Model Number:
MM692, XBAF69, SDSK2, SDRLR1, BTK106
Weight:
10.86lbs
Internal SKU:
mm692_acc_kit
Internal Product ID:
200628
| 5 star |
|
90% |
| 4 star |
|
8% |
| 3 star |
|
1% |
| 2 star |
|
1% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Five Piece Installer Panel Removal Tool Kit for Car Stereo/Audio (Belva BTK105)
Good for the price, could be better, does what it’s supposed to
65
found this helpful.Nifty
Nice to have these to use instead of a screwdriver! So I don't mark up my doors, dash, or paint. A lot sturdier than they look as well.
Verified purchase
59
found this helpful.Bulky
Bulky but overall decent product and not great in tight spaces
Verified purchase
58
found this helpful.Works great.
Used these on the wife's van (multiple panels) and my 68 fastback. The tools work like a charm. No scratches or issues on my panels and no broken tools is a victory all the way around.
59
found this helpful.Five Piece Installer Panel Removal Tool Kit for Car Stereo/Audio (Belva BTK105)
Great little tool kit worked great for what I needed.
Verified purchase
57
found this helpful.Great tools
These tools made my project really easy. They are great value and quality.
57
found this helpful.Excellent Product
I have run these in the rear deck of my Altima for over a year. They have what it takes. Solid sound with lots of power and no distortion. I would highly recommend them.
56
found this helpful.Don't go without it
This really helps with overall sound quality, especially mid-bass in my experience. NVX offers excellent quality at better prices are than other popular sound deadening brands.
Verified purchase
57
found this helpful.Super Value Marine Speakers
Great volume and warmth. Handles 150 watts each, and will take a beating.
Verified purchase
56
found this helpful.Awesome roller!
I'm really happy that I bought this roller. I also have two other (smooth) rollers, but this one works much better. Its little "fingers" press the NVX sound mat really well and it allows it to be spread evenly over the entire surface including all these different curves and corners. The roller is very sturdy too. After 30 sq. ft. the roller started squeaking a little, but it still keeps working perfectly! I'm sure that the roller will help me to put all 60 sq ft of the sound mat and still will be fine. Great roller!! This item is highly recommended and even "a-tool-you-must-have!" for anyone who works with sound isolation of vehicles!
Verified purchase
54
found this helpful.
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
