600W 10" Power T1 Series Dual 2 ohm Subwoofer
• 1200W Peak
• 600W RMS
• High Excursion TPE (Thermo-Plastic Elastomer) Surround
• SWIFT Impedance Selection
• Dual Opposing Spiders
• Parabolic Triangular Cone Geometry
Choose from any of our many bundles that include this product for even more savings!
Rockford Fosgate Power T1D210 + Belva MDFS10 Subwoofer Enclosure
600W 10" Power T1 Series Dual 2 ohm Subwoofer + 10" Sealed Enclosure
(225)
$469.97
• 1200W Peak
• 600W RMS
• High Excursion TPE (Thermo-Plastic Elastomer) Surround
• SWIFT Impedance Selection
• Dual Opposing Spiders
• Parabolic Triangular Cone Geometry
The T1D210 Power Series 10" Subwoofer by Rockford Fosgate has a peak power rating of 1200 watts and a RMS rating of 600 watts. This sub will produce some ground shaking bass and is constructed with a kevlar fiber reinforced semi pressed paper cone and a VAST santoprene rubber surround. This woofer is also equipped with Inductive Damping Heat Sink, this helps radiate heat to reduce the voice coil temperature and keeps the sub operating at a safe operating temperature when pumping out high amounts of SPL. Add some bumps in your trunk and enhance your cars stereo system with this Power Series Subwoofer.
SWIFT: Selectable Woofer Impedance Fused Termination
Making installation faster and easier, Rockford Fosgate developed SWIFT terminals. This system allows the nominal impedance of voice coils to quickly be configured in a Series or Parallel wiring configuration. Removing and inverting the center plug, a Series or Parallel wiring configuration is accomplished. The removable jumper also provides fused protection in severe overload conditions.
IDHS: Inductive Damping Heat Sink
By securing the Inductive Dampening Heat Sink (IDHS) to the top of the magnet structure, Rockford Fosgate is able to improve the efficiency of their drivers. This is accomplished by reducing the amount of distortion and back Electro-Magnetic Force (EMF). The IDHS also radiates heat to reduce the temperature in the voice coil.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
VAST: Vertical Attach Surround Technique
In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.
Internal Product ID:
22586
Great sub for the money!
I was very skeptical about fosgates products. All I've ever used are Jl w7's, but I do not have the Jl slash series amps anymore therefore chose to try a different sub. Bought one t1 dual 2ohm 10 matched with an old school crossfire vr1000d. This thing blew me away. Crisp clean bass. She goes low and no offense to Jl (my all time fav) this 10 whoops on the w7 10 all day everyday. Fosgate calls for 1.75 cu ft ported. Go bigger! 1.95cu ft is better for this sub. Powered right, one sub is all you need.
27
found this helpful.bangin. but over priced
I install stereos for my friends and there friends and so on. This sub is nice and clean and gets really low.. but I feel it is waaaay over priced.
24
found this helpful.Best 10 inch subwoofer
Power this sub correctly and this thing will strait get DOWN....it hits harder then 2 pioneer 12s i used to have hands down.. and WAY better sound quality ... my girl don't even want to ride in the same car anymore lol!!! BUY THIS SUBWOOFER YOU WILL NOT REGRET IT
22
found this helpful.Rockford fosgate t1
Amazing speakers that hit really hard. Sound great, great power, crazy highs
19
found this helpful.Slammin' Sub In A Tiny Package!
This sub is by far the best 10" I have ever laid ears upon. With Rumbling lows in a ported/vented enclosure, to crisp highs with a sealed enclosure, this sub is sure to please!
20
found this helpful.Slamming subs
This sub can handle some power and sound good. Would recommend.
18
found this helpful.Descent
A descent sub for the average person, I stress average, this sub will not blow you away or pound like a competition sub. If looking for a ground shaking sub look somewhere else like Sundown, Atomic etc...but if you want just a little bass then go ahead.
16
found this helpful.None Better for the Price!
I have always been an MTX guy but I have heard some installs of RF and have found them to be somewhat OK (backyard install type of deal). After buying my new Silverado I decided to Drop one 10" underneath the rear passenger seat just to give me that good clean sound of music that you come to grow fond of and need. Well I was Shocked!! This thing POUNDS!! I have it hooked to a RF p500.2 bridged @ 500 watts RMS. The birth sheet has it going @ 734 watts RMS. So I have it turned down just a touch and it plays LOUD and CLEAR at ALL levels with no issues even with it being run close to max RMS. Seriously thinking of dropping one or two more in now. Best bang for your Buck!!!
16
found this helpful.Best selling similar products
• 800W Max
• 200W RMS
• Poly-Coated Paper Cone
• Foamed Rubber Surround
• Stamped Steel Shallow Mount Basket
• Vented Motor Structure
• Dual 2" 4-Layer Voice Coils
(2)
$69.95
• 300 Watts RMS
• Sensitivity: 84.07 dB
• Mineral-Filled Polypropylene Cone
• Large Roll Surround
• Elevated Frame Cooling
• DMA Optimized Motor System
• Metallic Silver Frame Finish
(51)
$149.99
NVX VCW104 Version 3 (VCW104v3)
• RMS Power Range: 650-800 watts
• Pressed Paper Cone Carbon Fiber Top
• Dual 4-ohm Voice Coil
• High Excursion Foam Surround
• Dual Progressive Spiders with Integrated Tinsel Leads
(53)
$149.95
• Mounting depth: 3.250 "
• Precision-built in USA at JL Audio’s Miramar, Florida factory
• Injection molded, mica-filled polypropylene cone
• Rubber Surround
• Cast Alloy Basket
• DMA-optimized motor design
• Very small sealed enclosure volume requirements
(18)
$449.99
• 700 watts Watts Peak
• 350 watts Watts RMS
• Carbon Fiber Reinforced Polypropylene Cone
• Butyl Rubber Surround
• Includes Depth Extension Clearance Plate
• Mounting Depth: 3-1/4"
(1)
$79.99
Save up to 10 different vehicles in your garage