800W 12" Power T1 Series Dual 2 ohm Subwoofer
• 1600W Peak
• 800W RMS
• High Excursion TPE (Thermo-Plastic Elastomer) Surround
• SWIFT Impedance Selection
• Dual Opposing Spiders
• Parabolic Triangular Cone Geometry
• 1600W Peak
• 800W RMS
• High Excursion TPE (Thermo-Plastic Elastomer) Surround
• SWIFT Impedance Selection
• Dual Opposing Spiders
• Parabolic Triangular Cone Geometry
The T1D212 Power Series 12" Subwoofer by Rockford Fosgate has a peak power rating of 1600 watts and a RMS rating of 800 watts. This sub will produce some ground shaking bass and is constructed with a kevlar fiber reinforced semi pressed paper cone and a VAST santoprene rubber surround. This woofer is also equipped with Inductive Damping Heat Sink, this helps radiate heat to reduce the voice coil temperature and keeps the sub operating at a safe operating temperature when pumping out high amounts of SPL. Add some bumps in your trunk and enhance your cars stereo system with this Power Series Subwoofer.
SWIFT: Selectable Woofer Impedance Fused Termination
Making installation faster and easier, Rockford Fosgate developed SWIFT terminals. This system allows the nominal impedance of voice coils to quickly be configured in a Series or Parallel wiring configuration. Removing and inverting the center plug, a Series or Parallel wiring configuration is accomplished. The removable jumper also provides fused protection in severe overload conditions.
IDHS: Inductive Damping Heat Sink
By securing the Inductive Dampening Heat Sink (IDHS) to the top of the magnet structure, Rockford Fosgate is able to improve the efficiency of their drivers. This is accomplished by reducing the amount of distortion and back Electro-Magnetic Force (EMF). The IDHS also radiates heat to reduce the temperature in the voice coil.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
VAST: Vertical Attach Surround Technique
In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.
Internal Product ID:
22588
kickin it old school
rock t1 is the most amazing speaker running at 1 ohm 1800watts rms with only 1/4 bass booster and its the deepest bas ive ever heard to me better than a w6 equal to w7 better price!
24
found this helpful.BAD A** SUBWOOFER!!!
This Subwoofer pounds HARD!!! Not only does it pound but has Great response and sound quality..ive set many car alarms off with this sub haha...Over all i Rate this sub the Best
22
found this helpful.Amazing sub
This is my first sub ever and I have it in a ported box powered by a Kenwood KAC-9105d amp running at 2 ohms and 900 watts in an extended cab s10. i only have the amp turned up half way and its hard to sit in the truck. For the little extra cash it is totally worth it
23
found this helpful.Bumpin Hoopty
I love the hell out of this sub. It hits hard!!! High or low bass. My rear view mirror, not very handy they when you got the bass hittin like it does. Sometimes the dude mirrors too. Made my box to specs, wrapped it, & now i can't wait to drive anywhere & everywhere. Friends say its hard to breath. I guess I'm just used to it. Buy this sub!! You won't be disappointed.
22
found this helpful.WOW
Ordered this RF subwoofer with a RF P700-1BD. Already had made a custom fiberglass vented enclosure. This combo pounds. I have it installed in a Dodge Ram 1500. I am definitely very pleased with the customer service and that my large order was here in 3 days. Awesome!!!!
21
found this helpful.Ridiculous
I have owned these for about four months. Do not buy them if you ever plan on buying something of lesser grade/value in the future. Nothing will ever be good enough again. Wire them @2 ohm in a ported box. I have 2000 watts going to each sub. There's a good chance you may wet yourself with excitement. These subs will flex your roof, windows, doors, etc if wired and installed correctly. I would highly recommend these speakers to anyone even remotely considering. They brought my faith back to the RF product. Back when everything was under rated for competition. You will spend a pretty penny or two on them, but spend it knowing you will never need another sub. Fap fap fap fap.
21
found this helpful.Rockford fosgate T1 d2 12"
This is a really good sub and is well worth the money. If you want a system that hits really hard get these. The 12" or the 15" would be my recommendation. They can really handle the power well
19
found this helpful.Great sub
I've got this sub in a custom center console box for the back of an extended cab f-150. I'ts getting about 2.65 cubes after displacement of the sub and the port. But as far as the sub goes its slams for 1 twelve under 1000 rms. I've got it runnin on a db drive. 1000.1 and it keeps up with all kinds of music. I just wish the sub itself hit the mids a little better. Other than this i think this sub is a pretty good value and I would recomend it.
19
found this helpful.Rockford Thunderlude!!
I purchased this sub and have it installed into a 1.75" cubic ft. ported box in my Honda Prelude. I am pushing it with a Rockford Fosgate T1000.1 amp @ 1ohm. This sub is as advertised. (very loud!!!!). I replaced 2 Alpine R12's with this one sub and it produces as much bass. I did have my Alpines in a sealed enclosure though. Overall very VERY pleased!! I would recommed Rockford to anyone!!! Also I wasn't unpleased with my Alpines they were GREAT!! I'M just a ROCKFORD guy!!!
19
found this helpful.Insane!!!
I have two of these in a Birch wood ported box, hooked up to a 1501bd Fosgate power amp, and these slam!!!! The bass is insane! I have the entire trunk covered with Second Skin spray deadener and two layers of Dynamat Extreme, and still the panels vibrate. For the price, you can't go wrong.
20
found this helpful.Best selling similar products
NVX VCW124 Version 3 (VCW124v3)
• RMS Power: 1200 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
(111)
$209.99
Kicker Solo-Baric L7S124 (44L7S124)
• Peak Power: 1,500 watts
• RMS Power: 750 watts
• Injection Molded Polypropylene - IMPP Cone
• Santoprene Rubber Surround
• Impedance: Dual 4 ohms
• Mount depth: 6-13/16"
• Sensitivity: 86.9 dB
(4)
$279.96
• Mounting depth: 3.50 "
• Precision-built in USA at JL Audio’s Miramar, Florida factory
• Injection molded, mica-filled polypropylene cone
• Rubber Surround
• Cast Alloy Basket
• DMA-optimized motor design
• Very small sealed enclosure volume requirements
(10)
$499.99
• 800 watts Watts Max
• 400 watts Watts RMS
• Pressure treated foam surround
• Poly-cotton spider
• Heavy duty powder coated steel frame
• Vented aluminum former holds a 2" voice coil
(2)
$34.95
Rockford Fosgate Punch P3D4-12
• 1200 Watts Max / 600 Watts RMS
• Anodized Aluminum Heat Sinking Cone
• Santoprene Vertical Attach Surround Technique
• 4-Layer 2-1/2" Voice Coil
• Proprietary Spider Venting
(116)
$219.99
Save up to 10 different vehicles in your garage