1600W Peak (800W RMS) 12" Power Series Dual 4-ohm Car Subwoofer
• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Semi-Pressed Paper Cone
• Rubber Surround
• Mount depth: 6.75"
• Sensitivity: 85 dB
Get a Free roll of Belva 12 Gauge Speaker Wire. Simply click the "Add Both to Cart" button and you will see your savings at checkout. This offer cannot be combined with any other coupons or offers.
Rockford Fosgate Power T1D412
100% off
$449 99
$6 99
Priced separately $456 98
Promo Savings of $6 99
Total price:
$449 99
• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Semi-Pressed Paper Cone
• Rubber Surround
• Mount depth: 6.75"
• Sensitivity: 85 dB
The T1D412 Power Series 12" Subwoofer by Rockford Fosgate has a peak power rating of 1600 watts and a RMS rating of 800 watts. This sub will produce some ground shaking bass and is constructed with a kevlar fiber reinforced semi pressed paper cone and a VAST santoprene rubber surround. This woofer is also equipped with Inductive Damping Heat Sink, this helps radiate heat to reduce the voice coil temperature and keeps the sub operating at a safe operating temperature when pumping out high amounts of SPL. Add some bumps in your trunk and enhance your cars stereo system with this Power Series Subwoofer.
SWIFT: Selectable Woofer Impedance Fused Termination
Making installation faster and easier, Rockford Fosgate developed SWIFT terminals. This system allows the nominal impedance of voice coils to quickly be configured in a Series or Parallel wiring configuration. Removing and inverting the center plug, a Series or Parallel wiring configuration is accomplished. The removable jumper also provides fused protection in severe overload conditions.
IDHS: Inductive Damping Heat Sink
By securing the Inductive Dampening Heat Sink (IDHS) to the top of the magnet structure, Rockford Fosgate is able to improve the efficiency of their drivers. This is accomplished by reducing the amount of distortion and back Electro-Magnetic Force (EMF). The IDHS also radiates heat to reduce the temperature in the voice coil.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
VAST: Vertical Attach Surround Technique
In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.
Priced Individually
|
(newest, current model)
|
|
(previous model, replaced by Rockford Fosgate Power T1D412)
|
Best selling similar products
Rockford Fosgate Punch P3D2-12
• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 2 ohm
• Anodized Aluminum Cone
• Santoprene Rubber Surround
• Mount depth: 6.66"
• Sensitivity: 85 dB
$219.99
• RMS Power: 400 watts
• Impedance: Dual 4 ohm
• Mica Injected Polypropylene - MIPP Cone
• Rubber Surround
• Mount depth: 3.5"
• Sensitivity: 84.11 dB
$549.99
• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.5"
• Sensitivity: 85 dB
$189.99
Internal Product ID:
22589
| 5 star |
|
78% |
| 4 star |
|
19% |
| 3 star |
|
0% |
| 2 star |
|
4% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Holy bass!
This subwoofer is absolutely incredible! The bass is so clean and loud all without missing a beat, it puts out an insane amount of air. It also comes with security screws and a special drill bit to make sure not just anyone can remove it along with its own grille which was a nice bonus. I expect to be using this subwoofer for a long while. The only minor problem that I encountered was that the basket of this subwoofer had a little bit larger ridges so I had to modify my box a little bit but not a big problem for this absolute beast of a subwoofer!
56
found this helpful.Thunder
Sounds great it's almost a little too much. I have it paired with an Audiobahn. This thing out performs anything I've ever heard. High Quality sound, not too bad on price. Be sure to understand it does require I think an 11" or 11.5" diameter opening. You may need to do some cutting on your box. Otherwise highly recommended. You won't regret spending a little more.
55
found this helpful.Great Sub
Heard one of these playing it sound quite wonderful the bass is clear and solid and sounds different to other subs. Talk about built it's the best and my most loved feature is the copper heatsink within to draw heat away from the huge voice coil so you can play longer and cooler unlike other brands
53
found this helpful.Awesome subs!!!
I've had to of these powered by a RF P1000.1 for over 4 years now and they're still slamming, once they break in they are beastly. I pulled everything from my truck to get it painted and I'm upgrading to a RF T2500.1bdcp, 2 T2D412's and a RFC10HB and can't wait to install them. Also having to do some additional power upgrades as well but thanks to Sonic Electronix for having everything I need.
51
found this helpful.Great Sub
I have two of these in a ported max flow box built to specs ran by an alpine 2 channel 2000 watt amp with a 0 gauge power lead and a 4 gauge lead going to each terminal. They sound better than any other subs that i have had and all my friends love them. The bass is very accurate and has a very solid kick to it. You can even run more than the recommended max power to it if you know what your doing.
51
found this helpful.Awesome Sub
I have one right now at 4ohms running on brutus brz 1700.1 @ 600 watts and this thing pounds really loud and very deep bass my box is 1.75 l ported, im planning to get another one and bring it down to 2ohm to get 1200 watts on the BRZ. i was debating in getting the 2ohm load to get to 1ohm at 1700watts but it might damage the Sub but 1200 for 2 sub should be more than adequate.
50
found this helpful.T1D412
T1 subs thump bass, PERIOD !!
If you can fit them in your ride, pick up
one or two.
50
found this helpful.never consider any others
Everytime someone hears my sub for the first time they ask how many subs i have. once they find out I have one it blows their mind. If u don't want to take a lot of space but still want to thump outta control then this will do the job I am now and will forever be rockin fosgate after owning this sub
49
found this helpful.BUY THESE SUBWOOFERS
So i have two of these now just got them from this site. sonicelectronix.com with a 3.4 cubic feet box, and these just hit so hard on every tone so clean like nothing! i have them wired to 1 ohm and a 1000.1bd rockford fosgate amp (underrated amp) really is 1414 rms amp and i have it turned up just over half way and it will hurt your ears if you want power and some really clean bass get these.
i had 4 rockford fosgate p3 subwoofers and just 2 beat all 4 of them!!
its insane if you dont get these subs your insane!
(p..s) make sure you have a extra battery and good alternator your lights will dim to power these sub's
49
found this helpful.WOW!!
I have one in an ext cab F-150 running at 2 ohms on a ZX1000.1 and it just pounds. its in a ported box built to spec. I got the amp on 4 AWG power and ground and the sub on 10 AWG. beore that i had 2 CVR 12s on a memphis 1100 and this one 12 puts both to shame, nothiong compares to it!!! for just one 12 it sounds like you have 3. best sub i have ever had!!!
46
found this helpful.
100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.
Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!
Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!
Did you know sound dampening will reduce those annoying rattles and even increase your SPL?
Did you know sound dampening will reduce those annoying rattles and even increase your SPL?
