






Access exclusive offers, news and more.
Thanks for signing up. You'll be the first to receive updates about new collections, top brands, and exclusive products.
• Peak: 500W x 1 @ 4 ohm, 750W x 1 @ 3 ohm, 1000W x 1 @ 2 ohm
• Unregulated PWM switching type power supply
• Class D Circuitry
• Bass Boost: 0-12 dB
• Speaker-level (high-level) inputs with included harness
• Dimensions: 7.68"W x 10.94"L x 2.09"H
The JL Audio JX Series of amplifiers are designed with a specific purpose; to deliver clean, rock-solid performance and reliability at an affordable price. Unlike gimmicky price-conscious amplifiers, JL Audio employs specified oversized output transistors and rugged MOSFET power supplies to unsure proper current, thermal capacity and better overall performance. In addition, the JX1000/1D includes flexible signal processing capabilities with a fully variable 12 dB/octave crossover filter, pass-through preamp outputs and a Bass EQ. With the optional JL Audio RBC-1 Remote Level Control (sold separately), you can control the subwoofer volume from the front of the vehicle.
JX monoblock subwoofer amplifiers are specifically designed to drive subwoofers. Their frequency response is limited to the range below 150 Hz., making them unsuitable for driving midrange speakers or tweeters.
For those systems that do not offer a preamp level signal option, you can connect speaker level signals directly to the "Hi-Level Inputs" connector using the supplied connector and wire harness. Simply splice the appropriate left/right and positive/negative wires to the included harness and plug the harness into the "Hi-Level Inputs" connector on the amplifier. The JX monoblock will attenuate the high-level signal to make it compatible with its input stage. Alternatively, a traditional left/ right pair of RCA type jacks is used for preamp level (low-level) signals. This is the preferred connection method whenever available.
The JX monoblock features a 12 dB/octave low-pass active filter for its internal channel. This feature is designed to attenuate frequencies above its filter frequency, so that the system's subwoofer(s) do not reproduce any audible and often harmful mid-range frequencies. The low-pass filter is fully variable between 50 Hz and 200 Hz via the "Filter Frequency" control knob. 80 Hz is a good starting point for system tuning, but its also advisable to match the crossover point with that of your satellite speakers' high-pass filter - this ensures that your system is properly distributing the frequencies to the appropriate medium.
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
Manufacturer:
Model Number:
JX1000/1D
Weight:
7.81lbs
Internal SKU:
jx10001d
Internal Product ID:
33534
5 star |
|
88% |
4 star |
|
8% |
3 star |
|
4% |
2 star |
|
0% |
1 star |
|
0% |
Durability |
|
4.9 |
Value |
|
4.8 |
Features |
|
4.6 |
Design |
|
4.9 |
Usability |
|
4.9 |
do u recommend to buy this amp
hey I have the same speakers as u 2 12w3v3 4 ohms does this amp give a good power to these speakers ?
89
found this helpful.Great product
Excellent product, great customer service, running jl 12" 500rms sub, sounds great
85
found this helpful.Nice Buy
Very good sound. Very easy to use and install. Fast shipping. Added what i was looking for to my 2 JL 12 in. w3s.
85
found this helpful.Amazing amp from an amazing brand
I got this JL Audio JX1000/1D amp to replace my Kenwood KAC-9105D and I know the price is a little steep, but I know that this amp won't crap out on me like my Kenwood one did. I don't have any problems with the JL amp overheating or anything and it does exactly what it's supposed to.
83
found this helpful.Great Sub Maybe
I have never seen a bad review of this sub. I purchased this sub because of good reviews and the JL brand name. Nobody has mentioned a huge downside of this amp. There is no subsonic filter.
I am trying to put together a high end system and I am feeling uneasy about my purchase. I think I hear distortion because of subsonic noise. I would have chosen another option because this.
82
found this helpful.Great amp
Had this amp for six months now. Runs cool to the touch with no issues and good power.
81
found this helpful.Plenty of Clean Power!
The JX1000/!D is another great JL Audio product that puts out plenty of clean power! The amp runs cool and continues to drive subs very well. With the price of the amp, the only addition to the amplifier that JL Audio should include is a RBC-1 control. That control would optimize all types of music!
80
found this helpful.Crazy Amount Of Power
I have 2 JL Audio 12W3v3 4 ohms(500 RMS a piece) hooked up to this amp. I have the gain all the way down, and have never touched the bass boost. My subwoofers flex extremely hard even with the gain all the way down, which is why I am scared to test the limits of my W3's with this amp by turning up the sensitivity. I have also hooked up my friends Alpine Type R to this amp and had to run to shut the music off because the sub could not nearly handle the power of this amp despite the amp being turned down so low. This amp is power hungry so make sure your subs can handle it!
80
found this helpful.nice amp
This amp can make any subs sound clean and bump hard. Pros are that it's really durable and it can get down and dirty and ive never had it over heat and shut off atfer hours of use. Cons, none.
80
found this helpful.great value!
For the price and the size of the amp u can't go wrong..its real small and it has a lot of power..i'll will give u clear and clean bass..I got 2 JL W5 flat spks on my 08 1500 Silverado crew cab and it sounds real good..
79
found this helpful.Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(166)
$49.99
List price $59.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(60)
$49.99
List price $59.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(60)
$49.99
List price $59.99
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
(30)
$61.99
List price $68.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(7)
$66.99
List price $74.99
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
(11)
$35.99
List price $55.00
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(1)
$74.99
List price $159.00
4 Gauge Premium (CCA) Copper Clad Aluminum Amplifier Power Wiring Kit with Speaker Wire
(19)
$24.99
List price $49.99
NVX Remote Level Bass Control with Digital Voltmeter
Controls bass level and frequency and monitor voltage
(8)
$33.99
List price $99.99
The XLOC22X helps you easily integrate with your factory or aftermarket stereo system
(5)
$39.99
List price $99.99
Looking to fine tune the bass in your vehicle? Look no further
(7)
$59.99
List price $71.99
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
(42)
$169.00
List price $249.99
NVX XIV25 V-Series 2-Channel RCA Cable
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
(41)
$12.99
List price $18.99
NVX XWS1225 12 AWG Speaker Wire
25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
(50)
$29.99
List price $49.99
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
(42)
$6.99
List price $14.99
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit
Comes with everything you need to upgrade your power and ground wire.
(85)
$99.99
List price $114.99
680 Amp SPP Series Dry Cell Battery with Protective Steel Case
(23)
$306.99
List price $269.00
80 Amp Smart Relay Isolator (XSBI80)
Smart isolator - Monitors and auto-charging feature!
(2)
$25.99
List price $49.99
Great for isolating a second batter making it dedicated to the stereo system
(9)
$15.99
List price $19.99
200 Amp Smart Relay Isolator (XSBI200)
Smart isolator - Monitors and auto-charging feature!
(5)
$54.99
List price $79.99
200 Amp Relay Isolator (BIR200)
Great for isolating a second batter making it dedicated to the stereo system
(16)
$44.99
List price $59.99
500 Amp Smart Relay Isolator (XSBI500)
Smart isolator - Monitors and auto-charging feature!
(6)
$74.99
List price $99.99
500 Amp Relay Isolator (BIR500)
Does not create a voltage drop to the second battery like conventional isolators
(36)
$70.99
List price $89.99
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
(33)
$109.99
List price $131.99
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
(79)
$49.99
List price $79.99
Belva Nine Function Digital Multimeter
Perfect for any installation and troubleshooting
(7)
$9.99
List price $29.99
Six Function Digital Multimeter
Perfect for every toolbox
(8)
$7.99
List price $14.99
This is a must have! Set your crossover frequency like a Pro
(19)
$192.99
List price $195.99
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal
Make installation a breeze with the XBTU
(19)
$16.99
List price $24.99
World's Smallest AFS / Mini ANL Fuse Holder
Accepts 4 gauge or 8-gauge wire
(13)
$10.99
List price $19.99
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
(11)
$6.99
List price $9.99
High Quality Element Resistant AGU Fuse Holder
Belva BAGUH2 AGU Fuse Holder
(2)
$4.99
List price $9.99
Modular Linkable ANL Fuse Block
Modular Linkable ANL Fuse Block
(3)
$16.99
List price $59.99
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output
No-fail termination and current flow, it helps keep your system protected and running smoothly
(50)
$14.99
List price $24.99
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
(6)
$8.99
List price $9.99
4 Pack of 80 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
(18)
$3.99
List price $8.99
4 Pack of 100 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
(17)
$3.99
List price $8.99
4 Pack of 150 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses
(10)
$3.99
List price $8.99
2 Pack of 100 Amp Nickel-Plated ANL Fuse
ANL 100A Nickel plated for better power transfer
(7)
$3.99
List price $7.99
2 Pack of 200 Amp Nickel-Plated ANL Fuse
Two fuses per order. High quality 200 Amp ANL Fuses
(20)
$4.99
List price $7.99
2 Pack of 300 Amp Nickel-Plated ANL Fuse
Two fuses per order. High quality 300 Amp ANL Fuses
(17)
$3.99
List price $7.99
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin
Great for amplifiers that do not accept a large gauge power wire
(23)
$9.99
List price $19.00
Pair of 4 Gauge Spade Terminals, #8 Opening
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
(6)
$1.99
List price $3.99
4 Gauge Ring Terminals, 5/16" Opening
Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)
(3)
$4.99
List price $6.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(5)
$2.99
List price $9.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
(24)
$9.99
List price $9.99
RCA Ground Loop Noise Isolator
RCA noise filter
(36)
$11.99
List price $21.00
Sign up for our emails and we’ll send you a code for
10% off the .
Be the first to know about new arrivals, exclusive offers, and more!
Check your email for the code and start saving today!
*Offer valid for new customers only. Contact us and we’ll help you build the system of your dreams for less.
By clicking "Get my discount!" and submitting your email, you agree to our
Terms of Service and
Privacy Policy.