Access exclusive offers, news and more.
500W Max (250W RMS) 12" Punch P1 Series Single 4-Ohm Car Subwoofer
Choose from any of our many bundles that include this product for even more savings!
Get a Free roll of Belva 16 Gauge Speaker Wire. Simply click the "Add Both to Cart" button and you will see your savings at checkout. This offer cannot be combined with any other coupons or offers.
Enhance the look of your subwoofer with RGB lighting and control it all remotely. Simply click the "Add Both to Cart" button and you will see your savings at checkout. This offer cannot be combined with any other coupons or offers.
• 500W Peak
• 250W RMS
• Kevlar Reinforced Paper Cone
• High Density NBR Half-Roll Surround
• 2" 4-Layer Voice Coil
• 10 AWG Nickel Plated Compression Input Push Terminals
The P1 Series continues Rockford Fosgate's world famous line that is considered to be "The Woofer of Choice" for car audio systems. The P1S4-12 subwoofer has a peak power rating of 500 watts and an RMS rating of 250 watts. Just like all Rockford Fosgate products, this subwoofer is built with quality and durability. The P1S4-12 features a high modulus kevlar reinforced paper cone with a high density NBR half-roll surround. The 10 AWG nickel plated push terminals with keep a secure connection at all times while resisting corrosion. The Punch Series 12" woofer also comes equipped with 2" 4-layer high temp voice coil, poly cotton spider, extended pole piece, bumped backplate, and a proprietary spider venting/cooling technique that helps keep subwoofer operating at a safe temperature. Once again, Rockford has made a top notch product at an affordable price.
While built on a long standing history of performance, the punch series woofers can deliver not only the output to satisfy you when you want it loud but maintain a level of sound quality for when you really want to "listen" to your music. Taking many design cues from the Power Series, Rockford Fosgate engineers continue to improve the Punch Series year after year making it one of the most sought after woofer lines for music and bass enthusiasts alike. With features like Dual tear & fatigue resistant poly-cotton spider for high strength and anodized aluminum voice coil formers to handle heat buildup in the motor structure under full power situations, these drivers are designed to perform.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
Internal Product ID:
I purchased 2 of these in a sealed box on a 400 rms Kicker 4ch amp. These subs hit hard, deep, and accurate. Would def recommend and buy again. Quality sub.
I have 4 of the p1's wired down to 1 ohm on a kole 7000 class-d amp and all i can say is wow.
Good bang for buck
Great sub if your looking for a good kick that doesnt drown out the music.
Even though this is only a 250 watt sub. If you hook up two of these, then you'll have a pretty good amount of bass. I defiantly wouldn't run these over 300 watts of constant power. Very good sound quality excellent. And my favorite part is that this sub isn't to particular with the size of the enclosure. As long as it's pretty close to what it's supposed to be. Unlike Alpine type r's where the box has to be perfect for the sub otherwise you wont get the best performance you can.
not up 2 par
I have one of these in a ported box running off a p300-1, i have the 4ohm woofer. To start off with do not, i repeat do not over power this woofer it will fry it instantly. Hooked a t1000-1bd and it lasted 15 min. The woofer would get extremely hot just on the p300, and would distort after a good hard 20 min of playing, the woofer has great mid and low bass but the deep stuff is just out of its league. I know what your thinking well ya its going to fry on a t1000 but i put a sundown sa10 on it and it played for months.
These things pound in a sealed enclosure with a little amp, with a big amp they pound with a ported enclosure. I used to own 2 p1s4-10. But then i decidedi needed to upgrade my system. i would highly recomend these if your looking for some hard hittin bass in the trunk.
(P.S.my friends are jealous of these)
This was my first sub woofer I have ever got for my truck and I was very pleased with its performance. I paired it with a kenwood 350watt amp. The sub was way underpowered. It was only getting 150rms. The sub woofer had a fairly good sized magnet considering its only a P1. However it is time to upgrade so i just ordered a Rockford Fosgate T0 2 Ohm 12" sub for Christmas. This product is recommended for beginner system.
Rockford Fosgate 12's..
I put 2 of these speakers under my rear seat in my 04' ford f150 with a ken wood 500watt mono amp...Hits unbelievably hard!!!... i would definitely recommend these speakers!!!
Sick first subs
These subs see definitely a crowd pleaser! I have two in my trunk and I love watching people's faces light up when they hear them!
Good but to better
This sub is great for the money, clean bass in a sealed enclosure, but if you were wanting a good thump with it, upgrade to a p2 or a p3.
Best selling similar products
• RMS Power: 1200 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
• Peak Power: 1000 watts
• RMS Power: 500 watts
• Polypropylene Cone
• Santoprene Rubber Surround
• Impedance: Dual 2 ohms
• Mount depth: 5-3/4"
• Sensitivity: 86.9 dB
• Mounting depth: 3.50 "
• Precision-built in USA at JL Audio’s Miramar, Florida factory
• Injection molded, mica-filled polypropylene cone
• Rubber Surround
• Cast Alloy Basket
• DMA-optimized motor design
• Very small sealed enclosure volume requirements
• 1200 Watts Max / 600 Watts RMS
• Anodized Aluminum Heat Sinking Cone
• Santoprene Vertical Attach Surround Technique
• 4-Layer 2-1/2" Voice Coil
• Proprietary Spider Venting
• 400 Watts RMS / 800 Watts Max
• Injection molded SoloKon cone
• Ribbed Santoprene Surround
• Stamped Steel Basket
• Perimeter Venting
• Spiralead tinsel-lead technology
Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.
Save up to 10 different vehicles in your garage