1000W 15" Power T1 Series Dual 4 ohm Subwoofer
• 2000W Peak
• 1000W RMS
• Dual 4 Ohm
• Kevlar Fiber Reinforced Paper Cone
• VAST Santoprene Rubber Surround
• Anodized Aluminum Voice Coil
• Inductive Damping Heat Sink
• SWIFT Terminals
Choose from any of our many bundles that include this product for even more savings!
Belva BB5000Dv2 + Rockford Fosgate 15" Subwoofer + Free XKIT02
3000W RMS Belva Monoblock Amplifier + Rockford Fosgate T1D415 Dual 4-Ohm Subwoofer + NVX XKIT02
(48)
$943.95
• 2000W Peak
• 1000W RMS
• Dual 4 Ohm
• Kevlar Fiber Reinforced Paper Cone
• VAST Santoprene Rubber Surround
• Anodized Aluminum Voice Coil
• Inductive Damping Heat Sink
• SWIFT Terminals
The T1D415 Power Series 15" Subwoofer by Rockford Fosgate has a peak power rating of 2000 watts and a RMS rating of 1000 watts. This sub will produce some ground shaking bass and is constructed with a kevlar fiber reinforced semi pressed paper cone and a VAST santoprene rubber surround. This woofer is also equipped with Inductive Damping Heat Sink, this helps radiate heat to reduce the voice coil temperature and keeps the sub operating at a safe operating temperature when pumping out high amounts of SPL. Add some bumps in your trunk and enhance your cars stereo system with this Power Series Subwoofer.
SWIFT: Selectable Woofer Impedance Fused Termination
Making installation faster and easier, Rockford Fosgate developed SWIFT terminals. This system allows the nominal impedance of voice coils to quickly be configured in a Series or Parallel wiring configuration. Removing and inverting the center plug, a Series or Parallel wiring configuration is accomplished. The removable jumper also provides fused protection in severe overload conditions.
IDHS: Inductive Damping Heat Sink
By securing the Inductive Dampening Heat Sink (IDHS) to the top of the magnet structure, Rockford Fosgate is able to improve the efficiency of their drivers. This is accomplished by reducing the amount of distortion and back Electro-Magnetic Force (EMF). The IDHS also radiates heat to reduce the temperature in the voice coil.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
VAST: Vertical Attach Surround Technique
In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.
Internal Product ID:
34765
T1D415
The T1 sub delivers on such an amazing level that I can't put what I want to say into words. So I will keep this short as possible. If you want to have outstanding bass with high spl this is your sub. On the other hand, if you want sound quality then this sub will also please just about any audiophile. Just remember, if you want spl go ported, and if you want sound quality go with a sealed box. Like I said from the start, the T1 sub DELIVERS.
29
found this helpful.T1D4-15
I have two of these on a T1500-1 bd amp and they perform better
than any sub I have had in my Nissan Versa hatchback.
If you have the funds, I'd say buy this sub knowing that it
is money well spent.
P.S. I love the ability to switch between 2 or 8 ohms with just the
flip of a plug, and best of all only one pos and neg hook-up.
21
found this helpful.Good old Fosgate Power!
Installed this sub in my friends 98 Grand Prix in a custom box and so far it has managed to break his trunk latch and shake his rear spoiler loose. It's also very durable, getting fed 1000 watts daily on music and it hasn't had a single problem to date. Overall a very solid woofer.
19
found this helpful.Updated Review
I had two of these on a Rockford T 1000-1bdcp and thought that was great, but then I put a Rockford T 1500-1bdcp on these subs and they took the word bass to a whole new meaning. These subs made everything in my Nissan Verse hatchback shake. The T 1000-1 amp is great, but it had these subs under powered. The tech at Sonic was correct, these subs on a Rockford T 1500-1bdcp is wicked strong. I highly suggest you get one or two if you can fit them in your ride.
18
found this helpful.T1D415
Awesome sub. Hits hard! Highly recommended. I have one and it's louder than my friends two kickers.
18
found this helpful.Low rumble
For the first time, I am at a loss for words, from the moment you pick this sub up you will notice what a real sub feels like. There is nothing negative I could say, no bad comment, and no regrets. I listened to several songs, and no matter what type they sounded great. I have two in a ported box in a Nissan Versa hatchback. They are driven by a RF T-1000-1 constant power amp. If you can, get them and have no regrets.
17
found this helpful.Best selling similar products
Kicker Solo-Baric L7S152 (44L7S152)
• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Injection Molded Polypropylene - IMPP Cone
• Santoprene Rubber Surround
• Impedance: Dual 4 ohms
• Mount depth: 8-11/16"
• Sensitivity: 89.4 dB
(1)
$359.96
NVX VCW152 Version 3 (VCW152v3)
• RMS Power: 1500 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
(30)
$239.99
• Peak Power: 1000 watts
• RMS Power: 500 watts
• Coated Paper cone
• Reinforced double stitched Rubber surround
• Impedance: Dual 2 or 4 ohms
• Mount depth: 6.83"
• Sensitivity: 88.4 dB
$349.95
NVX VCW154 Version 3 (VCW154v3)
• RMS Power: 1500 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
(41)
$239.99
• Peak Power: 2800W
• RMS Power: 1400W
• Dual 2 ohm Voice Coil
• Extremely Rigid Non-Pressed Paper Cone Assembly
• Multilayered Polymer Wide Roll Foam Surround
(5)
$524.99
Save up to 10 different vehicles in your garage