Rockford Fosgate P3D4-10 | 1000W 10" Dual 4-Ohm Car Subwoofer

Rockford Fosgate Punch P3D4-10

1000W Max (500W RMS) 10" Punch P3 Series Subwoofer (Newest Model)

1000W Max (500W RMS) 10" Punch P3 Series Subwoofer (Newest Model)

• 1000W Peak
• 500W RMS
• Anodized Aluminum Heat Sinking Cone
• Santoprene Vertical Attach Surround Technique
• 4-Layer 2-1/2" Voice Coil
• Proprietary Spider Venting

5.0

(27)
List price $285.99
Save: $36.00

$249.99

In Stock with warranty
Thanks , You Pay:
Order within 19 hrs 28 mins to ship 6/18

FREE delivery: Tue, June 22 to VA.

Item Condition: Brand new

The item is brand new and not used.


protection

Add a protection plan

squarespace
3 years for

60Days
60-Day Money-Back

Hassle Free Returns

365days
365-Day Coverage

Warranty assistance for a year

DESCRIPTION
Rockford Fosgate

Authorized dealer




Taking Punch to a Higher Stage

Sonic Electronix is now carrying the brand new line of Rockford Fosgate Punch P3 Series Car Audio Subwoofers. The P3D4-10 Punch Series 10" Subwoofer has a peak power rating of 1000 watts and a RMS rating of 500 watts. This sub will produce some earth shaking bass and is constructed with an anodized aluminum cone and a vertical attach surround technique. This woofer is also equipped with a 2.5" Voice coil and a protective PVC textured magnet cover. Add some bumps in your trunk and enhance your cars stereo system with this Rockford Fosgate Punch Series Subwoofer.

While built on a long standing history of performance, the punch series woofers can deliver not only the output to satisfy you when you want it loud but maintain a level of sound quality for when you really want to "listen" to your music. Taking many design cues from the Power Series, Rockford Fosgate engineers continue to improve the Punch Series year after year making it one of the most sought after woofer lines for music and bass enthusiasts alike. With features like Dual tear & fatigue resistant poly-cotton spider for high strength and anodized aluminum voice coil formers to handle heat buildup in the motor structure under full power situations, these drivers are designed to perform.

 
Anodized Aluminum Voice Coil Former

Anodized Aluminum Voice Coil Former

By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

 
CEA-2031 Rockford Fosgate Subwoofers

Conforms to CEA-2031

Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.

 
Rockford Fosgate Stitched Tinsel Leads

Stitched Tinsel Leads

To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.

 
Rockford Fosgate VAST Surround

VAST: Vertical Attach Surround Technique

In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.





 

Key Benefits

  • 10" Dual 4 ohm Punch Subwoofer
  • Power Handling:
    • Peak: 1000 watts
    • RMS: 500 watts
  • Recommended power range: 250 - 600 watts RMS
  • CEA-2031 Compliant
  • Klippel Verified
  • Flex-fit Mounting pattern
  • Proprietary spider venting/cooling technique
  • StampCast basket with integrated spider venting
  • Sturdy 16 gauge compound bend frame geometry
  • High modulus Kevlar re-inforced paper-pulp cone
  • Semi-flexible, PVC removable protective motor cover
  • Multi-point high-temp/high-strength neck joint bonding technique
  • Tall-profile VAST Santoprene surround for larger surface area
  • Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
  • Fatigue resistant and reduced strain "stitched on" flexible lead wire design
  • Proprietary all metal, radially oriented compression input terminal assembly
  • Optimized motor magnetics with extended pole and bumped vented backplate
  • High temp 2.5" voice coil w/ spun-laced Nomex insulating re-inforcement collar
  • Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill
  • Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10

  •  
  • Mounting Depth: 6.18"
  • Cutout Diameter: 9.13"
  • Magnet Weight: 81 oz
  • Frequency Response: 28 - 250 Hz
  • Xmax: 15.9mm
  • Sensitivity: 82 dB @ 1 watt / 1 meter
  • Recommended Ported Enclosure: 1.40ft³
  • Recommended Sealed Enclosure: 0.59ft³
  • Matching Amplifiers: (one subwoofer)
  • Matching Amplifier: (two subwoofers)
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

  • Priced Individually

Check out the Rockford Fosgate P3 Series Owner's Manual

Tips for Installing the P3D4-10 Subwoofer


Product history:

Rockford Fosgate P3D4-10 thumbnail
(newest, current model)
Rockford Fosgate P3D410 thumbnail
(previous model, replaced by Rockford Fosgate Punch P3D4-10)
Rockford Fosgate P310D4 thumbnail
(previous model, replaced by Rockford Fosgate Punch P3D410 (09P3D410))
FEATURES & SPECS
Subwoofer Specifications
Subwoofer Series
Punch P3 (Rockford Fosgate)
Subwoofer Size
10"
Peak Power Handling
1000 watts
RMS Power Handling
500 watts
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
4 ohms
Voice Coil Diameter
2.5"
Frequency Response
28 - 250 Hz
Sensitivity
82 dB
Xmax (millimeters)
13.9 mm
Subwoofer Design
Round / Circle
Main Cone Color
Black
Woofer Composition
Aluminum
Woofer Surround
Santoprene Rubber
Magnet Structure
Double Stacked
Subwoofer Grille
Optional (Accessory required and sold separately)
Re-Cone Kit Available
No
Recommended Enclosure Specifications
Recommended Enclosure Type
Ported / Vented
Sealed
Minimum Sealed Box Volume
.50 cubic feet
Maximum Sealed Box Volume
.75 cubic feet
Minimum Ported Box Volume
1.40 cubic feet
Maximum Ported Box Volume
1.40 cubic feet
Top-Mount Depth
6-3/16"
Cutout Diameter
9-1/8"
Shallow Mount Installation
No
Electromechanical Parameters
Free-Air Resonance (Fs)
28 Hz
Equivalent Compliance (Vas)
27.00 liters
Total Speaker Q Value (Qts)
0.56
Electrical Q Value (Qes)
0.63
Electrical Resistance of Voice Coil (Re)
6.40 ohms
Mechanical Q Value (Qms)
5.00
What is in the box?
WITB: Subwoofers
Subwoofer
Paperwork
User manual
Authorized Dealer
Authorized Dealer
Authorized Dealer
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer
VIDEOS AND HOW - TO
  • 3Sixty3 Aftermarket Setup Wizard Tutorial
  • Rockford Fosgate P3 Subwoofer (Punch Stage 3 Car Sub)
  • Car Subwoofer Size Buying Guide | What Size of Sub Should I Get?
  • How to Install a Car Subwoofer in a Box
REVIEWS
Rockford Fosgate Punch P3D4-10

Rockford Fosgate Punch P3D4-10

5.0

(27)

Write a review

Overall rating distribution

5 star
96%
4 star
4%
3 star
0%
2 star
0%
1 star
0%

By feature average rating

Durability
5
Value
5
Features
4.8
Design
5
Usability
5

Joe

May 25, 2012

Great Product!

Installed one of these with a RF 500.1D amp in a vented box tuned at 40hz. This thing bangs, it hurts my ears and brain when its turned up. Response is a bit sloppy but that is expected with the vented box. If your looking to keep your bass tight and clean go with a sealed box otherwise go with the vented box to get the most sound out of your sub. I didn't think that one 10" sub could produce this much bass. It shakes my mirrors and probably the peoples mirrors in front of me. If your thinking about getting this sub know that its a great buy, your getting a top quality product from RF that is built to bang.

22

found this helpful.

Donald

September 24, 2014

Amazing sub for a great price

Man can these subs pack a punch. I have 2 of these subs side by side in a sealed box and they hit more frequencies then i expected. Best part is these subs can take a beating. You can run them at the point of distortion if not over the point and they pound hard all day.

21

found this helpful.

Jackie

September 8, 2014

P3 SPEAKERS

I have always had good luck with rockford products. These speakers
perform very well and I think they are priced very good.

21

found this helpful.

Trevor

June 1, 2012

pound very good

bought these off sonic for a friend and installed in his 2010 Impala, they pound very good and seem very heavy duty, so far so good, very good for the price.

20

found this helpful.

Trent

May 20, 2014

P3D4 Rocks

I just replaced an Infinity Reference 1060 10" sub with the P3 and the difference is amazing. This sub hits real hard and goes low with little effort. I would recommend this subwoofer for those trying to save space in their trunk and still have enough bass to feel it. Two of these would be off the chart! Great price and fast shipping from sonicelectronix as always. Thanks!

19

found this helpful.

Janea

September 17, 2013

I love these subs!

They're a little weak in the mid range which is to be expected with 10 inches but they pound hard and hit the low freqs. real nice. I beat on these things and they take it well! Very happy! 4.5 stars ....would give them 5 if they hit the mids a little better....had some Polks that did but I blew them...at least these take a pounding. :)

20

found this helpful.

wrangler1868

September 17, 2013

Amazing speaker

I purchased this 10" sub because I wanted high quality bass, without having to give up much trunk space.

I can tell you, this thing sounds better than when I had 2-12" mid-level RF subs installed. It might not push as much air as 2 12's, but the the sound quality is full and crisp.

In my opinion, it is the perfect balance between having a nice, full stereo sound in your vehicle, while avoiding to sound ghetto by rattling everyone's car around you.

The only thing I would consider when looking to buy this sub, is what kind of music you listen to. This will perform great with most genres, but it does have a little trouble dropping to very low frequencies which are incorporated in some rap songs (in a sealed box, I read you might get a bit better lows in a banpass).

20

found this helpful.

Smitherson

December 23, 2014

Amazing sub

I had the older 10" p2d4, and replaced it with this sub (P3D4-10). It is leaps and bounds more accurate than the p2d4. Best purchaseing decision ever. Put it in a good box. I'm running it on 400wRMS & it is blowing the box to pieces!

19

found this helpful.

Gord

October 3, 2012

Awesome Subs

Sonic Delivers
FAST
Good Value
Best Subs ever
Will buy again

21

found this helpful.

ground pounder

September 26, 2014

hits tight and hard

I have this sub in my '07 Vette installed in a sealed custom box of my own construction, flanked by two RF PPS4-10 mid-range. No complaints at all. After a 30-hour break-in it sounds awesome.

18

found this helpful.

blookazoo

June 8, 2015

Great product

Very good subwoofers for small enclosures. Very accurate bass, not muddy at all. Has available grills for behind seat style setups. Also has plenty of room for extra screws in the mounting base. Only improvement that could be made is the size of the push terminal inlets, one or two sizes bigger would be fantastic. Overall though, it's is a wonderful product. (Highly recommended)

8

found this helpful.

chicken wing George

January 5, 2016

deep base

Very nice quality product, sturdy and silent core. Delivers deep bass and nice quality sound. Overall the product is what I expected it to be. Performs at high quality when the volume is increase the base does not cut out no clipping. I have had this product before into 12 punch subwoofers. That was years ago and the quality has increased over time.

3

found this helpful.

kyle

July 22, 2015

Amazing Quality and sound

These P3's are amazing subs. They have nice clean base and hit dang hard(varies on kind of box) It is a awesome looking, amazing sounding, Overall great sub! Definitely would recommend to everyone!

6

found this helpful.

Paul

April 11, 2018

Great sound and great price

The punch P3 is a great buy if you have a small amount of trunk room.
(Mustang convertible)

2

found this helpful.

Anonymous

December 15, 2018

Great subwoofer.

I currently am running one of these in my 05 Dakota on the new Skar RP1200-1D, and this sub sounds amazing. In the near future, I will be purchasing another one of these to sit beside my current one in a 2.8 cuft box tuned to 35 Hz. I'm excited as ever, and know from 2 years of owning the P3 subwoofer that it will be an astounding setup. These are a got to have if you want some accurate bass in your vehicle. And don't just through 500 watts on these. They can handle 650-750 all day, just tune the amp accordingly. I will update this review once I get my other from sonicelectronix.

1

found this helpful.
ACCESSORIES
WIRING GUIDE
Wiring Guide to Wire 1 Rockford Fosgate Punch P3D4-10 Subwoofer

Mono Amp

2 Channel Amp - Bridged

Wiring Guide to Wire 2 Rockford Fosgate Punch P3D4-10 Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

Wiring Guide to Wire 3 Rockford Fosgate Punch P3D4-10 Subwoofers

Mono Amp

4 Channel Amp

Wiring Guide to Wire 4 Rockford Fosgate Punch P3D4-10 Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

TRENDING SIMILAR 10" CAR SUBWOOFERS

Best selling similar products

JL Audio 10W0v3-4 10" Subwoofer

• 300 Watts RMS
• Sensitivity: 84.07 dB
• Mineral-Filled Polypropylene Cone
• Large Roll Surround
• Elevated Frame Cooling
• DMA Optimized Motor System
• Metallic Silver Frame Finish

(44)

$129.99

Kicker CompVX CVX104 (44CVX104)

• 600 Watts RMS
•1,200 Watts Max
• Polypropylene cone
• Ribbed santoprene surround with blue stitching
• Cast aluminum basket
• Large ceramic magnet
• High-temperature voice coils

(2)

$179.96

Cerwin Vega HS104D

• 800W Max
• 200W RMS
• Poly-Coated Paper Cone
• Foamed Rubber Surround
• Stamped Steel Shallow Mount Basket
• Vented Motor Structure
• Dual 2" 4-Layer Voice Coils

(2)

$74.99

Massive Audio GTX102

• 1400 Watts Max
• 700 Watts RMS
• UV Treated Non-Pressed Paper Cone
• EROM Foam Surround
• Heavy Gauge Steel Basket
• 10mm Top Plate
• Double Stacked 120 oz. Magnets

(4)

$134.99

Alpine W10S4 10" Bass Subwoofer

• 750W Max
• 250W RMS
• Polypropylene-Mica cone
• High-excursion poly-foam surround
• High-strength custom steel frame
• Progressive Wavelit Ribs (P.W.R.) cone design

(9)

$84.95

Searches Related to the Rockford Fosgate P3D4-10
ITEM DETAILS

Manufacturer:

Model Number:

P3D4-10

Weight:

17.00lbs

Internal SKU:

p3d410

Internal Product ID:

34787

Item Added to Cart

1000W Max (500W RMS) 10" Punch P3 Series Subwoofer (Newest Model)

$249.99

Keep Shopping

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$26.99
Add Warranty
3 years of protection

FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

$35.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Rockford Fosgate Punch P3D4-10.