600W Max (300W RMS) Sealed Truck-Style Wedge Enclosure with One 10" Punch Stage 3 Subwoofer
• 300 Watts RMS
• 600 Watts Max
• Kevlar Fiber Semi-Pressed Paper Cone
• Compressed Sealed Poly-foam Surround
• ABS/Acrylic Dustcap Assembly
• 2.5" Voice Coil with spun-laced Nomex insulating collar
• 10 AWG compression speaker terminals
• 300 Watts RMS
• 600 Watts Max
• Kevlar Fiber Semi-Pressed Paper Cone
• Compressed Sealed Poly-foam Surround
• ABS/Acrylic Dustcap Assembly
• 2.5" Voice Coil with spun-laced Nomex insulating collar
• 10 AWG compression speaker terminals
The P3S-1X10 sealed enclosure was designed specifically to fit in the space behind many regular truck cab seats. It comes preloaded with a single 10" Punch Stage 3 shallow dual voice coil subwoofer that can handle up to 300 watts RMS. The enclosure is wired to a low 1-ohm final impedance. It will drive your amp to its maximum. Just make sure you pair it with a 1-ohm stable amplifier. If you're looking to save or have minimal space, Rockford Fosgate's Punch PBR300X1 amp is a perfect match for this enclosure, generating 300 watts RMS at 1 ohm. The enclosure is constructed with 1/2" medium density fiberboard covered with heavy-duty black carpet.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
VAST: Vertical Attach Surround Technique
In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.
Check out the Rockford Fosgate P3S-1X10 Owner's Manual
Internal Product ID:
43402
| 5 star |
|
75% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
25% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
awesome value
Put the speakers in my truck and now have a great sound. Hope these speakers stick around in my life for a while:-) 1000 wat mono amp would help Lol
53
found this helpful.Good sub but pretty weak
I bought this sub to go behind the back seats in my 2004 gmc sierra. It fit nicely and sound pretty good but was a Little disappointed in the power of it (could have been the amount of power I was putting to it). Compared to some of the other 10 inch subs I've had this was probably the weakest one. Easy to get to the limit of it.
54
found this helpful.Rockford Fosgate BOOM BOOM!
I installed this booming 10 incher under the rear seat of a 2010 Ford F-150 supercab truck. Fits perfectly. Excellent quality with big, clean pounding bass out of such a thin boxed sub. Turned my truck into rolling thunder. I installed it with the Rockford Fosgate 1 ohm amp which is nice and small yet very effective! You won't be disappointed!
52
found this helpful.awesome value
Put the speakers in my truck and now have a great sound. Hope these speakers stick around in my life for a while:-) 1000 wat mono amp would help Lol
50
found this helpful.
25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)
20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)
Universal, Professional Heavy Duty Roller for Sound Damping/Dampening
Best selling similar products
• Sealed enclosure with 1 12" Solo-Baric L7T Series Subwoofer
• 600 watts RMS ( Peak)
• Final Impedance: 2-ohm
• Dimensions: 21.5" L x 13.75" H x 7.75" W x 4.375" W2
$279.96
• Sealed downward-firing enclosure with one CompRT 12" subwoofer and passive radiator
• 3/4" medium-density fiberboard construction covered with carpet
• 2-ohm total impedance
• Power Handling: 500 watts RMS (1000 watts peak power)
• Sensitivity: 98 dB
• Frequency Response: 25-500 Hz
• Dimensions: 27-1/2"W x 14-5/8"D x 6-1/8"H
$263.96
• 10" Solo-Baric Subwoofer in Thin Profile Enclosure
• RMS: 500W / Peak: 1000W
• Square Sub Design Moves 20% More Air Than Round Subwoofers
• Easily Mounts Under or Behind a Seat
• Advanced internal bracing
• Ribbed Santoprene Surround Resists Heat And Degrading
$239.96
Alpine SBT-S10V SWT Loaded Enclosure
• Ported enclosure with 1 10" SWT Series Subwoofer
• 350 watts RMS (1000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 21 7/8" L x 15 1/2" H x 7 1/2" W x 4 1/4" W2
$299.95
• 500 watts Single 10" Sealed Subwoofer Enclosure
• Dual 2 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions:6-1/8" x 23-3/8" W x 14-3/8" H
$263.96
• 400 Watts RMS / 1,500 Watts Max
• Impedance: 2 Ohm Single Voice Coil
• Sensitivity: 88 dB
• Rubber Surround
• Fully Covered Steel Mesh Grille
$279.99
• Sealed enclosure with 1 10" S Series Subwoofer
• 300 watts RMS ( Peak)
• Final Impedance: 2-ohm
• Dimensions: 12.5" L x 4.5" H x 18.5" W
$449.95
• 1000 W Dual 12" Sealed Subwoofer Enclosure with Comp RT and Reflex passive radiator
• Sealed enclosure with stylish black carpet finish
• All-weather thin subwoofer
• SoloKon technology
$255.96
JL Audio MicroSub+ ACP108LG-W3v3
• 250W Single 8" Vented Subwoofer Enclosure with Built-In Amplifier
• 8" W3v3 Series Subwoofer(s)
• Built-in DCD Class D amplifier
• CNC-Cut High-Grade MDFConstruction w/ high-grade automotive carpet
• Enclosure Dimensions: 5.125" D x 18.500" W x 11.125" H
$599.99
