• 300 Watts RMS
• 600 Watts Max
• Kevlar Fiber Semi-Pressed Paper Cone
• Compressed Sealed Poly-foam Surround
• ABS/Acrylic Dustcap Assembly
• 2.5" Voice Coil with spun-laced Nomex insulating collar
• Dual 10 AWG compression speaker terminals
The Rockford Fosgate P3S 10" shallow mount subwoofer delivers Punch, even in depth limited situations. Rockford Fosgate understands all vehicles are not the same, and some cannot accommodate deep subwoofers. In the past, that meant no Bass. Not anymore! Now even depth challenged vehicles can have REAL Bass and the Dual Voice Coil allow configurations for every application. The P3SD2-10 Punch Series 10" Shallow Subwoofer has a peak power rating of 600 watts and a RMS rating of 300 watts. This sub will produce some earth shaking bass and is constructed with an anodized aluminum cone and a vertical attach surround technique. This woofer is also equipped with a 2-1/2" Voice coil and a protective PVC textured magnet cover. Add some bumps in your trunk and enhance your cars stereo system with this Rockford Fosgate Punch Series Subwoofer.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
VAST: Vertical Attach Surround Technique
In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.
Overall rating distribution
By feature average rating
September 16, 2014
Great shallow mount sub
I bought 2 of these for my ford f150 to go under the back seat bc I didn't have much room. I was very surprised to hear the quality and loudness of these shallow mount subs. Rockford fosgate does a great job with these shallow mount subs don't let the reputation of other shallow mounts scare you these sound great. And you can't find a better place to buy them from than sonic electronix. I have mine hooked to a Hifonics Zeus 1100 watt peak power amp. Good combo in my opinion
March 22, 2014
Great speakers love the sound
I bought the speakers from my 2010 infiniti G 37S. As we all know the G 37 has a very small trunk apartment so I had to have a custom-built speaker box made. The box had .50 ft.³ per chamber so I bought the Rockford Fosgate shall amounts and they work great I cannot be happier.
November 8, 2014
Great subs for space limitation
Got this sub into sealed wedge box behind rear seat of Toyota Hilux at 0.72cuft and damn!!! it bumps and will sure gave good bass.
Tried to call public and made them guess how many subs and inch, all of them were wrong, with mostly said its a single 12", its that good. All in all great subs for those who have little space and need bass!
March 3, 2013
Best shallow sub I've listened too
I just installed two of these in my Tacoma double cab behind the rear seats. Even with them tucked behind the seats you can easily feel the punch they bring out. With any shallow mount sub sitting in a 4 inch deep enclosure, like the one I've installed, the low notes IDE say 35 hertz and lower don't respond well. I listen to rap and rock and for both this sub is the way to go for sure for tight space applications! I recommend this sub absolutely.
November 15, 2013
I have two in my truck they are with out a doubt the best sub i have ever bought i didn't think that they would hit that hard but once i turned my favorite song on i was completely surprised that they hit that hard for a shallow mount i have had 2 12 deep mounts that don't hit as hard as they do, and its not just hard its nice and smooth beats too.
over all a 5 star from me!
August 25, 2018
Puts in work for a slim 10"
I wanted to keep as much cargo area as possible in my 2000 4runner, but couldn't live without some kind of bump. So i went with the p3sd2-10 in a slim box that I converted to a downfiring enclosure. It rounded out the sound and makes my commute livable once again.
January 15, 2017
I purchased two Rockford Fosgate P3SD210 subs as a birthday/Christmas present. I initially didn't expect much considering they were 10" shallow mount subs, but I must say they exceeded my expectations greatly! They produce nice sound while packing a pretty decent punch. They are installed in an 07 Chevy Avalanche and I am pleased with the choice I made in subwoofers. For the price and quality, I'd definitely recommend these to anyone who is looking for some quality 10" subs.
Best selling similar products
• 350 Watts RMS
• 700 Watts Max
• Injection molded SoloKon cone
• Ribbed Santoprene Surround
• Stamped Steel Basket
• Perimeter Venting
• Spiralead tinsel-lead technology
• 300 Watts RMS
• Sensitivity: 84.07 dB
• Mineral-Filled Polypropylene Cone
• Large Roll Surround
• Elevated Frame Cooling
• DMA Optimized Motor System
• Metallic Silver Frame Finish
• 600 Watts RMS
•1,200 Watts Max
• Polypropylene cone
• Ribbed santoprene surround with blue stitching
• Cast aluminum basket
• Large ceramic magnet
• High-temperature voice coils
• 800W Max
• 200W RMS
• Poly-Coated Paper Cone
• Foamed Rubber Surround
• Stamped Steel Shallow Mount Basket
• Vented Motor Structure
• Dual 2" 4-Layer Voice Coils
• 750W Max
• 250W RMS
• Polypropylene-Mica cone
• High-excursion poly-foam surround
• High-strength custom steel frame
• Progressive Wavelit Ribs (P.W.R.) cone design
Internal Product ID:
Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.