Spend $200+ & Get $20 SonicBux in August More Info

Clarion XC1410 Like New, Demo Product

300W XC Series Micro 4-Channel Class-D Compact Design Car Amplifier

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Item Condition: Like New

  • Like new Damaged Package:
    • General Features:

      • XC Series 4-Channel Class D Car Amplifier
      • RMS Power Rating:
        • 4 ohms: 50 watts x 4 chan.
        • 2 ohms: 75 watts x 4 chan.
      • Pulse Width Modulated MOSFET power supply
      • Speaker-level (high-level) inputs
      • 3-way protection circuitry (thermal, overload, and speaker short protection)
      • Input sensitivity:
        • Low level: 125mV-5V
        • High level: 250mV-10V
      • Selectable high-pass filter (60 Hz, 90 Hz, FLAT)
      • CEA-2006 compliant amplifier
      • 8 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
      • Dimensions: 7-1/8"W x 2-3/4"D x 1-3/8"H
      • 90 Day Sonic Electronix Warranty

    Power Specifications - Full Range Channels

    RMS Power @ 4 ohms

    The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

    If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

    50 watts x 4 channels
    RMS Power @ 2 ohms

    The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

    If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

    75 watts x 4 channels

    Amplifier Specifications

    Marine Certified
    Marine certified means that the unit has been designed and manufactured with a marine use in mind. It will withstand the harsh conditions that come from marine use. Generally, they are treated against UV rays and treated with special protective coatings.
    Amplifier Class

    An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

    Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

    Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

    Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

    D
    Number of Channels
    Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
    4
    Total RMS Power Output
    Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

    RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

    The RMS output figure is much more accurate than the peak rating when comparing products.

    300 watts
    Maximum Input Gauge Size
    This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
    8 AWG
    Minimum Impedance Unbridged
    The lowest impedance the amplifier will handle when it is not bridged.
    2 ohms
    Minimum Impedance Bridged
    The lowest impedance the amplifier will handle when it is bridged.
    Not Bridgeable
    THD at Rated RMS Power
    The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
    0.1%
    Speaker Level Inputs
    Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
    Yes
    Preamp Outputs
    Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
    No
    Built-in Crossover

    A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

    When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

    High-Pass (HP)
    High-Pass Crossover Frequency
    The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

    The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

    Selectable 60-80 Hz
    Signal-to-Noise Ratio
    This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
    80 dB
    Bass/Gain Remote
    If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
    No
    Fan Cooled
    A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
    No
    Fuse Rating
    The amperage and the number of fuse(s) an amp requires.
    25A x 1 
    CEA-2006 Compliant
    Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
    • RMS Power
    • Signal-to-Noise Ratio

    This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

    Yes

    What is in the box?

    WITB: Amplifiers
    A detailed list of the equipment (main product and accessories) included with your amplifier. If special accessories are included in the box, they will be listed and detailed below the main list of equipment.
    Other Accessory #1
    Standard accessories are included in the main list above; however, this line provides specific details on an additional, unique accessory that is included with the product.
    Other Accessory #2
    Standard accessories are included in the list above special accessories; however, this line provides specific details on an additional, unique accessory that is included with the product.
    Other Accessory #3
    Standard accessories are included in the list above special accessories; however, this line provides specific details on an additional, unique accessory that is included with the product.
    Other Accessory #4
    Standard accessories are included in the list above special accessories; however, this line provides specific details on an additional, unique accessory that is included with the product.
    Other Accessory #5
    Standard accessories are included in the list above special accessories; however, this line provides specific details on an additional, unique accessory that is included with the product.
    Paperwork
    Paperwork included with the product.

    Warranty and Return Policy

    Parts Warranty Duration
    90 days
    Labor Warranty Duration
    90 days
    Warranty Provider
    Sonic Electronix

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    Stinger SK4681

    8 Gauge 4000 Series Complete Amplifier Wiring Kit

    Your Price $36.99

    Belva BAK82

    8 Gauge Amplifier Installation Kit with 2-Channel RCA Interconnects

    Your Price $21.99

    NVX XKIT82

    8 Gauge True Spec Amplifier Installation Kit

    Your Price $44.99

    NVX XUBT3

    Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

    Your Price $74.99

    NVX XUBT4

    Universal Bluetooth Audio Receiver

    Your Price $74.99

    NVX V-Series RCA Interconnect Cable

    19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

    Your Price $14.99

    Kicker 4-Channel RCA Audio Interconnect Cable

    4 Meters (13 ft.) 4-Channel K-Series RCA Audio Interconnect Cable

    Your Price $19.99

    StreetWires ZN7 RCA Interconnect Cable

    16.4 ft. of 4-Channel RCA Cable with hyper twist construction, oxygen free copper, and precision machined tips.

    Your Price $59.99

    StreetWires FB8

    8 Gauge Firewall Bushing

    Your Price $6.95

    Car/Marine Audio Installation Kit

    Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

    Your Price $14.99

    Hide answersShow all answers | Sort by
    No questions have been asked about this item. Be the first!

    Searches Related to the Clarion XC1410 Like New, Demo Product

    Product Summary

    Manufacturer

    Model Number

    XC1410 Like New, Demo Product

    Weight

    2.10lbs

    Internal SKU

    LS-xc1410-LNDP

    Internal Product ID

    109153

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Clarion XC1410 Like New, Demo Product

    Item Added to Cart

    Clarion XC1410 Like New, Demo Product

    300W XC Series Micro 4-Channel Class-D Compact Design Car Amplifier

    $79.99

    Keep Shopping

    Stinger SK4681

    8 Gauge 4000 Series Complete Amplifier Wiring Kit

    $36.99

    Add
    NVX XUBT3

    Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

    $74.99

    Add
    NVX V-Series RCA Interconnect Cable

    19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

    $14.99

    Add

    Don't see the accessory you're looking for?
    View all available accessories for the Clarion XC1410 Like New, Demo Product.