General Features:
- 12" VS-Series Version 2 Dual 4-ohm Car Subwoofer
- Power Handling:
- RMS: 450 - 600watts
- Recommended power range: 225 - 600 RMS
- Aluminum Shorting Ring to prevent rises in inductance
- Non Pressed Paper cone
- High Roll Custom Blended Foam surround
- Stamped Steel basket
- 100oz Y30 High Energy Ferrite Magnet
- Impedance: Dual 4 Ohms
- Mounting depth: 5.95" (151 mm)
- Cutout diameter: 11.12" (282.50 mm)
- Mounting Diameter: 11.63" (295.50 mm)
- Overall Diamter: 12.44" (316 mm)
- Frequency Response: 20 - 200 Hz
- Sensitivity: 90 dB (1W/M)
- Xmax: 12mm
- Sd: 49.08 cm²
- Resonance Frequency (Fs): 25 Hz
- Net Weight: 15.58 lbs (7.05 kg)
- Recommended Ported Enclosure: 1.75ft³
- Recommended Sealed Enclosure: 1.25ft³
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Priced Individually
Additional Information:
Why a 12" Subwoofer? Choosing the right subwoofer size can be a difficult decision to make. To help with your decision, you can check out our K-Base Article, that breaks down the difference in the sound generated by the four most common subwoofer sizes. Click Here to read about The Differences In Subwoofer Sizes.
Check out the NVX VS-Series User Manual
General Features:
- BB Series Monoblock Class D Car Amplifier
- RMS Power Rating:
- 4 ohms: 540 watts x 1 chan.
- 2 ohms: 900 watts x 1 chan.
- 1 ohm: 1200 watts x 1 chan.
- Max power output: 2000 watts x 1 chan.
- Pulse Width Modulated MOSFET power supply
- Wired remote bass level control included
- LED power (green) and protect (red) indicators
- Variable Bass Boost (0 to +12 dB bass boost adjustable between 30-80 Hz)
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Heavy duty aluminum alloy heat-sink
- Input sensitivity:
- Low level: 100mV-6mV
- Variable low-pass filter (40-180 Hz, 12 dB/octave)
- Subsonic filter (12 dB variable from 20Hz - 50 Hz)
- Frequency response: 20-30,000 Hz
- 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
- Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Belva BAK42BL (Blue)
Primary Color: Blue - Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Cable (CCA Wiring)
Quantity: 1
General Features:
- Complete 4 Gauge 2-Channel Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts RMS
- Premium Powerflex power and ground wire provides optimal power transfer
- Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
- Belva CCA wire is made from 30% copper while other CCA wire is just 10% copper
- Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
- In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems
- Also available as 4-Channel Kit
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Kit includes:
- 17 ft. (5.2 meters) Blue 4 gauge power wire
- 3 ft. (.91 meters) Black 4 gauge ground wire
- 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
- 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
- 20 ft. (6.1 meters) Speaker cable
- One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse
- One Black rubber firewall grommet
- One 4 Gauge Blue chrome plated ring terminals
- One 4 Gauge Black chrome plated ring terminal
- Three 18 Gauge Blue Spade terminal
- Two 18 Gauge Black Spade terminal
- One 18 Gauge Red butt connector
- Ten 4" Black zip ties