Garage
Shop

NVX 12" Subwoofer + Crunch Amplifier Bundle

VSW122V2 600W 12" VS-Series V2 Dual 2-ohm Car Sub with PDX-1000.2 1000W Max 2-Ch PDX Series Amp and BAK82BL Complete 8G Amp Wiring Kit

NVX
Shop all NVX
EXCLUSIVE
Product videos
highlight-star-icon

• 600W 12" VS-Series Version 2 Dual 2-ohm Car Subwoofer
• 1000W Max 2-Channel Class A/B PDX Series Car Amplifier
• Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Cable (CCA Wiring)

Learn more about the vsw122v2_pdx10002_bak82bl

We apologize

This item has been discontinued

Product Highlights


• 600W 12" VS-Series Version 2 Dual 2-ohm Car Subwoofer
• 1000W Max 2-Channel Class A/B PDX Series Car Amplifier
• Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Cable (CCA Wiring)

Description


NVX brand icon

Authorized dealer

NVX VSW122V2

600W 12" VS-Series Version 2 Dual 2-ohm Car Subwoofer
Quantity: 1

General Features:

  • 12" VS-Series Version 2 Dual 2-ohm Car Subwoofer
  • Power Handling:
    • RMS: 450 - 600watts
  • Recommended power range: 225 - 600 RMS
  • Aluminum Shorting Ring to prevent rises in inductance
  • Non Pressed Paper cone
  • High Roll Custom Blended Foam surround
  • Stamped Steel basket
  • 100oz Y30 High Energy Ferrite Magnet
  • Impedance: Dual 2 Ohms
  • Mounting depth: 5.95" (151 mm)
  • Cutout diameter: 11.12" (282.50 mm)
  • Mounting Diameter: 11.63" (295.50 mm)
  • Overall Diamter: 12.44" (316 mm)
  • Frequency Response: 20 - 200 Hz
  • Sensitivity: 90 dB (1W/M)
  • Xmax: 12mm
  • Sd: 49.08 cm²
  • Resonance Frequency (Fs): 25 Hz
  • Net Weight: 15.58 lbs (7.05 kg)
  • Recommended Ported Enclosure: 1.75ft³
  • Recommended Sealed Enclosure: 1.25ft³
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

  • Priced Individually


Additional Information:

Why a 12" Subwoofer? Choosing the right subwoofer size can be a difficult decision to make. To help with your decision, you can check out our K-Base Article, that breaks down the difference in the sound generated by the four most common subwoofer sizes. Click Here to read about The Differences In Subwoofer Sizes.



Check out the NVX VS-Series User Manual

Crunch PDX-1000.2

1000W Max 2-Channel Class A/B PDX Series Car Amplifier
Quantity: 1

General Features:

  • PDX Series 2-Channel Class A/B Car Amplifier
  • MAX Power Rating (14.4V):
    • 4 ohms: 250 watts x 2 chan.
    • 2 ohms: 500 watts x 2 chan.
    • Bridged, 4 ohms: 1000 watts x 1 chan.
  • RMS Power Rating:
    • 4 ohms: 125 watts x 2 chan.
    • 2 ohms: 250 watts x 2 chan.
    • Bridged, 4 ohms: 500 watts x 1 chan.
  • SEPP (Single Ended Push-Pull) output technology
  • Pulse Width Modulated power supply
  • LED power (green) and protect (red) indicators
  • Slow un-mute soft start turn-on
  • 2/1 channel operation
  • Speaker-level inputs
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity: 200mV-6V
  • Variable high-pass filter 120 - 3,000 Hz, 12 dB/octave
  • Variable low-pass filter 50 - 250 Hz, 12 dB/octave
  • Variable Bass Boost: 0 - +12 dB bass boost at 45 Hz
  • Damping factor: >180
  • Signal-to-nose ratio: >98dB
  • Frequency response: 20 - 20,000 Hz
  • Fuse rating: 20A x 2
  • Dimensions: 9-7/8"L x 9-7/8"W x 2-1/16"H
  • 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Belva BAK82BL (Blue)

Primary Color: Blue - Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Cable (CCA Wiring)
Quantity: 1

General Features:

  • Complete 8 Gauge 2-Channel Amplifier Installation Kit
  • Designed specifically for car audio systems up to 500 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
    • Belva CCA wire is made from 30% copper while other CCA wire is just 10% copper
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • Mini-ANL Fuse holder with a 60 amp Mini-ANL fuse offers ideal protection
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Blue 8 gauge power wire
  2. 3 ft. (.91 meters) Black 8 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) Speaker cable
  6. One In-line Mini-ANL Fuse Holder with a 60 amp Mini-ANL fuse
  7. One black rubber firewall grommet
  8. One 8 Gauge Blue chrome plated ring terminals
  9. One 8 Gauge Black chrome plated ring terminal
  10. Three 18 Gauge Blue Spade terminal
  11. Two 18 Gauge Black Spade terminal
  12. One 18 Gauge Red butt connector
  13. Ten 4" Black zip ties

Specifications & Details


Amplifier Power Specifications
RMS Power @ 4 ohms
125 watts x 2 channel
RMS Power @ 2 ohms
250 watts x 2 channel
Bridged RMS Power
500 watts x 1 channel
Amplifier Specifications
Amplifier Class
A/B
Number of Channels
2-Channel
Total Peak Power Output
1000 watts
Total RMS Power Output
500 watts
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
<0.05%
Speaker Level Inputs
Yes
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
120 - 3,000 Hz
Low-Pass Crossover Frequency
50 - 250 Hz
Signal-to-Noise Ratio
>98 dB
Remote bass/level controller
No
Fan Cooled
No
Fuse Rating
20A x 2 
CEA-2031 Compliant
No
Subwoofer Specifications
Series
VS Series
Subwoofer Size
12"
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
2 ohms
RMS Power Handling
600 watts
Woofer Surround
Foam
Woofer Composition
Hybrid carbon and fiberglass woven cone
Sensitivity
90 dB
Frequency Response
20 - 200 Hz
Xmax (millimeters)
12 mm
Top-Mount Depth (Mounting Depth)
5.95"
Cutout Diameter
11.12"
Recommended Enclosure Type
Ported / Vented
Sealed
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

NVX

Model Number:

VSW122V2_PDX-1000.2_BAK82BL

Weight:

23.58lbs

Internal SKU:

vsw122v2_pdx10002_bak82bl

Internal Product ID:

110455

Product and How-to Videos


  • NVX VSWv2 Series Car Subwoofers | Product Overview
  • NVX VS-Series v2 Car Audio Subwoofers
  • Crunch PDX Series Car Audio Amplifiers | Product Overview

Customer Ratings & Reviews



5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...
Sorry, no reviews found

Add-ons


Similar Products

Best selling similar products

NVX QBUS8P

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(6)

$129.99

NVX QBSTA

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

$249.99

Pioneer TS-WX1210AM

• 350 watts Single 12" Subwoofer Enclosure
• 4 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 10" TD x 12-1/2" BD x 19-3/4" W x 14-7/8" H

(2)

$179.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(153)

$279.95

Belva BPKG210v2 Dual 10" Subwoofer and Amp Package with Box and Wiring Kit

• Works with both Factory and Aftermarket Audio Systems
• Dual 10" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(28)

$214.99

Related Searches


VSW122V2_PDX-1000.2_BAK82BL small

Item added to your cart.

Price: $159.84

Essential add-ons
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$89.99

$59.99

Add to cart
Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$236.95

$149.95

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$199.99

Add to cart
Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

$461.99

$451.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon