Belva BB5000D

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

General Features:

  • BB Series Monoblock Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 1200 watts x 1 chan.
    • 2 ohms: 1800 watts x 1 chan.
    • 1 ohm: 3000 watts x 1 chan.
  • Max power output: 5000 watts
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +12 dB bass boost adjustable between 30-80 Hz)
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink
  • Input sensitivity:
    • Low level: 100mV-6mV
  • Variable low-pass filter (40-180 Hz, 12 dB/octave)
  • Subsonic filter (12 dB variable from 20Hz - 50 Hz)
  • Frequency response: 20-30,000 Hz
  • 200-240 Amp in-line fuse required, see our selection of recommended fuse holders
  • Depending on operating impedance, 1/0 or 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Note: Internal fuses are not included, so an external 200-240 Amp ANL Fuse is required to safely operate this amplifier.


Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
The height of the item, measured from top to bottom, in inches.
The width of the item from left to right (side-to-side) measured in inches.
Color of handle.

Warranty and Return Policy

Parts Warranty Duration
90 days
Labor Warranty Duration
90 days
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating

Browse 5 questions and 24 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Because I wanted to prove to people this doesnt fry on its own,its because of people not knowing how to wire there amplifier right I've had no problems with this.
eduardo a on Nov 14, 2016
good reviews and met the requirements for my system.
Zachary G on Jul 8, 2015
Great price, good youtube internals-reviews
Cory C on Nov 30, 2015
This amp seems to offer the power and quality I need at a good price
Christopher K on Jun 6, 2015
Can i wire 4 Soundstream R.310's at 1ohm to a belva BB5000D?
jordin on Nov 16, 2014
Belva BB5000D
Belva BB5000D
Soundstream R3.10
Soundstream R3.10
Best Answer: Hi Jordin,

Yes, you can wire 4 R.310s to a final impedance of 1ohm.

Wire the voice coils in series, making them all 4-ohm subs, and then wire the subs in parallel so the amp would see the total load as one ohm.

Let us know if you have further questions.

Reply · Report · Brian MStaff on Nov 17, 2014
· Add Answer · I Have This Question Too (2)
y is the mono amp got 2 speaker outputs? how would i connect (2) nvx 122 12" 2ohm subs to get 1ohm final to this amp
Swaggy on May 22, 2015
Best Answer: Thebelva 5000d is a mono block amp. It has has two sets of output connectors that connects to one channel. Making it easier to connect mutiple subs. In order to get down to 1ohm load, you would need subs that or dual 4ohms. But this amp will have enought power at 2ohm load to drive these subs well. The only other option is only use one voice coil from each would be at a 1ohm load. But you will probly blow your subs prety quick.hope this helps.
Reply · Report · Cheryl S on May 23, 2015
· Add Answer · I Have This Question Too (0)
Will this amp be enough to power two Alpine SWR-12d4? Or am I better off getting the SWR-12d2 and getting the Belva BB5000D amplifier?
Nash P on Dec 20, 2014
Belva BB5000D
Belva BB5000D
Alpine SWR-12D2
Alpine SWR-12D2
Hifonics BRX2000.1D
Hifonics BRX2000.1D
Alpine SWR-12D4-OB
Alpine SWR-12D4-OB
Best Answer: Also, with the car revving thing the guy said above, it's not like that, that be like, I could set the max to 8,000 rpm to get maximum power when I need it, or I could set a governor at 6,000 so I'll never really be able to use the full potential. Just because you wire it to be able to push a 1,000 watts each, doesn't mean you're driving around with the stereo cranked. Which is just a bad idea. The belva is probably overrated anyway
Reply · Report · Deon M on Dec 26, 2014
· Add Answer · I Have This Question Too (0)
can this amp push 2 12inch l 7s?
A shopper on Nov 25, 2015
Best Answer: Hello,

For future inquires, please provide the actual model number of the subwoofers, not a description.

If your are referring to the current line:

Yes, IF the two subwoofers are the Kicker S12L72 (11S12L72, Dual 2-ohm) .

No, IF the two subwoofers are the Kicker S12L74 (11S12L74 Dual 4-ohm) .

The above models are asking for ~750w RMS EACH, that multiplied by two is obviously ~1500w RMS. When compared to the amplifier, the closest match is 2 ohms @ 1800 watts x 1 chan., making it a suitable match for the subwoofers, and will 'push' two Kicker S12L72 (11S12L72) wired in Series/Parallel. Give our sales team a call if you need more help that =] .
Reply · Report · Rick MStaff on Nov 27, 2015
· Add Answer · I Have This Question Too (0)

Searches Related to the Belva BB5000D

Product Summary


Model Number






Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Belva BB5000D