Dual 250W 10" Series II Dual 4 ohm Subwoofers with Sealed Enclosure and 600W RMS Class A/B 2-Channel Amplifier + Installation Kit
• 250 Watts RMS
• Polypropylene Cone
• Nitrile Butadiene Rubber (NBR) Surround
• SSI™ (Selectable Smart Impedance)
• Oversized 2.0" Voice Coil
• Sensitivity: 92 dB
• Amplifier 170 Watts RMS x 2 @ 4 ohms
• 300 Watts RMS x 2 @ 2 ohms
• 600 Watts RMS x 1 @ 4 ohm, Bridged
• Total Peak Power: 1500 Watts
• 1 Pair of Preamp Outputs
• Variable low-pass filter (50-250 Hz, 12 dB/octave)
• Variable high-pass filter (50-250 Hz, 12 dB/octave)
• 3/4" MDF Enclosure
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals
• 250 Watts RMS
• Polypropylene Cone
• Nitrile Butadiene Rubber (NBR) Surround
• SSI™ (Selectable Smart Impedance)
• Oversized 2.0" Voice Coil
• Sensitivity: 92 dB
• Amplifier 170 Watts RMS x 2 @ 4 ohms
• 300 Watts RMS x 2 @ 2 ohms
• 600 Watts RMS x 1 @ 4 ohm, Bridged
• Total Peak Power: 1500 Watts
• 1 Pair of Preamp Outputs
• Variable low-pass filter (50-250 Hz, 12 dB/octave)
• Variable high-pass filter (50-250 Hz, 12 dB/octave)
• 3/4" MDF Enclosure
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals
JBL believes sound quality should never be compromised. And Series III subwoofers make sure you don't have to compromise flexibility, either. That's because the high-performance, step-up subwoofers feature SSI™ (Selectable Smart Impedance), an exclusive impedance switch that lets you select the optimum impedance2 or 4 ohmsfor your system, And an oversized voice coil handles more power than common voice coils.
Most car audio system designs call for 2- or 4-ohm impedance. Series III subwoofers feature an exclusive dual impedance switch that lets you choose either load impedance option. Not available from any other manufacturer, SSI lets you reconfigure your system by simply flipping a switch.
Oversized voice coilThe two-inch voice coil proves you don't have to be a heavyweight to pack a serious punch. It handles more power than conventional voice coils, yet it's lighter than three-inch voice coils. It strikes the perfect balance between thermal power handling and low mass.
Sonic Electronix, one of the leaders in car audio, recently visited Harman, the premium global audio and infotainment group, at their research and development locations in Northridge, California and Detroit, Michigan. The purpose of these visits was to utilize and combine the powerful brand of Harman and the industry leading knowledge behind Sonic Electronix to begin working together on developing future car audio projects.
JBL S2-1024 **Toggle between 2-Ohm & 4-Ohm Impedance!**
1000w 10" Series II Subwoofer with Selectable 2 Ohm or 4 Ohm Impedance
Quantity: 2
Priced Individually
*Infinite-baffle mounting is possible, but the subwoofer's mechanical power handling will be reduced because there will be no volume of air to stiffen the subwoofer's suspension and prevent overexcursion. If you choose infinite-baffle mounting, consider the RMS and peak power-handling ratings to be half of what is listed
Dual 10" 3/4 MDF Sealed Subwoofer Enclosure (Belva MDFD10)
Dual 10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil (1.6 cu ft Airspace - 10SQB)
Quantity: 1
Belva BAK42BL (Blue)
Primary Color: Blue - Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Cable (CCA Wiring)
Quantity: 1
Manufacturer:
Model Number:
S2-1024_BB15002v2_MDFD10
Weight:
69.60lbs
Internal SKU:
s21024_bb15002v2_mdfd10
Internal Product ID:
128129
Best selling similar products