Product is good quality. works best if applied over dynamated surface. Noise reduction is mild, but noticable. Dont expect it to sound like a lincoln, but it helps with higher frequency reduction. Applies easily and sticks like crazy. Covers pretty large area, most hoods will be fine. kinda expensive for what it is, but overall happy.
Dynamat HoodLiner 11905
One 32" x 54" x 0.75" Thick Piece of HoodLiner Xtreme Dynamat (813mm x 1372mm x 19mm)
Bundles with this Product
Free Roller with Purchase of Select Sound Deadener!
For a limited time, get a FREE NVX SDRLR1 roller with the purchase of select Sound Deadener. Simply click the "Add Both to Cart" button. This offer cannot be combined with any other coupons or offers.
(Offer 1 of 1)
Combined Total Price
You Save $7.99
Dynamat Hoodliner is made from a polyether urethane based acoustic sound soaker foam with a reinforced, reflective aluminized skin that is cleanable and oil and water resistant. Hoodliner has a combination of open and closed cells to accept sound waves and dissipate them. This material is 3/4" thick and can withstand -40° to 225° with 97% heat reflection.Hoodliner Applications
The Dynamat Hoodliner is great for improving the overall sound quality in your vehicle and protecting your cars paint finish by reducing heat. It is typically used as an automotive engine compartment treatment. This kit contains one 3/4" thick 32" x 54" sheet that totals for 12 square feel of coverage.Easy Installation
Use scissors, knife or die to cut Dynamat Hoodliner to the desired size and shape before removing the release liner. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Now it’s time to peel off the release liner and start applying. The easiest way to apply is to bend the mat slightly and attach it along its shortest edge and pressing it firmly into place.
- Dynamat HoodLiner Sound Soaking Foam
- Used as an automotive engine compartment treatment
- Gray acoustic foam with aluminized facing
- 1 mil Reinforced aluminized polyester
- Maximum noise control when applied over Dynamat Xtreme
- Absorbs engine noise
- Reflects up to 97% of radiant heat to protect the hood's paint finish
- Contains one 3/4" thick 32" x 54" sheet
- Covers a total of 12 square feet
- High heat blocking properties
- Ultra lightweight & flexible
- Not affected by oil and does not absorb water
- Isolates vibrations and reduces unwanted noise
- Easy self adhesive installation
- Tensile Strength: 28
- Meets HBF fire classification
- Tear Strength: 2.4
- Temperature Resistance Range: -40°C to +107°C(-40°F to +225°F)
Sound Dampening Specifications
Warranty and Return Policy
Summary of Customer Ratings & Reviews
November 18, 2011
27 of 33 found this helpful
April 4, 2010
Covered my bare Amigo hood with a bit to spare. Attractive product and easy to work with. Looks great and engine noise is much less. It is much quieter in the cab and my stereo sounds even better. It really seems to reduce the high frequency sounds from the engine. All the valve noise is gone. $50 well spent!
26 of 31 found this helpful
SANDIA PARK nm
October 19, 2009
it works ----cut sound and heat ---glue works--stays in place----so far mice and rats have not used it for nesting material
29 of 37 found this helpful
November 25, 2016
I used the hood liner on my Mercedes Sprinter along with Dynamat for the doors and floor. I was very pleased with the reduction in noise and how much better we can converse in the cab.
0 of 0 found this helpful
Internal Product ID
Wiring Diagram Legend
Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.