JL Audio VX600/2i

600W RMS VXi Series Class D 2-Channel Amplifier with Built-In DSP

In Stock. Only 3 Left!
|

Thanks , You Pay:

$1099.99

with warranty

Order within 1 hr 23 mins to ship today

Qualifies for free 2-day shipping

Add an Extended Warranty

SquareTrade Product Warranty
60-Day Money-Back

Hassle Free Returns

365-Day Coverage

Warranty assistance for a year

Get FAST answers from customers ASK a Question See questions answers

Bundles with this Product

=

25% Off DD-1 Distortion Detector!

Get 25% Off an SMD DD-1 Distortion Detector with the Purchase of a Qualifying Amplifier. Simply Click the "Add Both to Cart" button below.

36.24

153631

490

JL Audio VX600/2i

$1099.99

+

25% OFF

SMD DD-1 Distortion Detector/Analyzer by Steve Meade Designs

$144.95

Special Price $108.71 ($144.95 if purchased separately)

SMD DD-1 Distortion Detector/Analyzer by Steve Meade Designs

Distortion Detector/Analyzer (DD1) • Distortion Detector's Circuitry Is 100% Analog • Distortion Detection Trigger Level > 1.0% Harmonic Distortion • Operating Range of Input Signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging • Signal Present LED Trigger Voltage 750mVrms

(Offer 1 of 1)

Combined Total Price

$1,208.70

You Save $36.24

JL Audio Store
JL Audio
VXi Series Amplifiers


JL Audio VX600/2i 2-Channel Amplifier with Built In Digital Signal Processor (DSP)

JL Audio's VX600/2i Amplifier

Sometimes, beauty's only skin deep and other times, it's what's on the inside that counts. But when you find something gorgeous inside and out, you never pass it up. JL Audio's brand new VXi amplifiers are designed not with a balance of beauty and function, but an abundance of both. You get amazing sound and looks.

JL Audio's VX600/2i 2-Channel Amplifier mixes beauty and function

The VX600/2i 2-channel amplifier has a built in Digital Signal Processor (DSP). Instead of concealing the controls behind a metal plate, all the tuning is right at your fingertips. Just connect with the free TüN app.

Once your installation is finished, you can tune from anywhere, and you can change your settings without getting out the tool kit. Adjust the parametric EQs on each channel, the gain and more through a phone, tablet or computer.

But who says looks don't matter? JL Audio placed all the connections on the VXi amps on one side, cleaning up every installation. The chassis hides all the mounting hardware. The logo badge rotates in 90-degree increments, depending on how you need to mount it, and you can change the LED backlight color to match your system. What are you waiting for? Get your VX600/2i now and hit Add to Cart!

JL Audio VX600/2i 2-Channel Amplifier has all the connections on one side.

General Features:

  • JL Audio VXi Series VX600/2i
  • Class-D Full Range 2 ohm Stable 2-Channel Amplifier
  • RMS Power Rating (14.4V):
    • 4 ohms: 180 watts x 2 chan.
    • 2 ohms: 300 watts x 2 chan.
    • Bridged, 4 ohms: 600 watts x 1 chan.
  • Unmatched built-in DSP functionality:
    • Premium, triple-core AKM DSP with an optimized configuration
    • Hi-Res audio processing at 24 bit/96 kHz
    • High-performance AKM A/D and D/A converters
    • 10 Bands of parametric EQ per channel, including pre-outs
    • Shelving EQ option for Bands 1 and 10
    • High and Low-Pass Filters for each channel, with selectable alignments and slopes:
      • Linkwitz-Riley: 12, 24, 48 dB/octave
      • Butterworth: 6, 12, 18, 24, 36, 48 dB/octave
    • Signal Delay in 0.01 millisecond steps
    • All-Pass Filter (Phase EQ), with variable "Q" and corner frequency
    • Polarity Reversal (0 or 180 deg.)
    • Output Level Trim in 0.1 dB steps
  • All adjustments performed through the free TüN app on a computer, smart phone or tablet
  • Add more functionality with the JL Audio JL Audio VXi-BTC and JL Audio VXi-HUB
  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Soft start turn-on
  • 2 or Mono channel operation
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Heavy duty aluminum alloy heat-sink
  • Input sensitivity: 200mV - 16V
  • Frequency Response: 12 - 24000 Hz
  • Total Harmonic Distortion (THD): <1% @ 2 ohms/channel
  • Signal to Noise Ratio: 99 dB
  • Variable high-pass and low-pass filters on each channel
  • Fuse Rating: 50A x 1
  • 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 9.81"W x 6.62"L x 2.12"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty


Check out the VX600/2i Owner's Manual

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

180 watts x 2 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

300 watts x 2 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

600 watts x 1 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
VXi
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

600 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
.1%
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
50A x 1 
Total Fuse Rating
The total amperage an amp requires.
50

Authorized Dealer

Authorized Dealer
We're an Authorized Dealer for nearly all the brands and manufacturers we sell. In the rare occasion we are not authorized, we guarantee that the product comes from an Authorized dealer or distributor. As such, we will always assist you even past the return policy to assure you the entire manufacturer warranty is covered in the event you have encounter a manufacturer defect.
Authorized Dealer

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
VIP Guarantee

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

JL Audio XD-PCS4-1B 4 Gauge Wiring Kit

Get a JL Audio wiring kit to match your new JL amplifier! Don't forget the RCA's!

Your Price $129.99

NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

Your Price $59.99

Stinger SK4641 4 Gauge Wiring Kit

Get a high quality amp kit from Stinger to get the most from your new amp!

Your Price $64.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction

Your Price $11.99

NVX XIX25 X-Series Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $24.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $24.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $17.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $65.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

Most Popular! 270+ amps at anything above 1800 rpm engine speed!

Your Price $446.99

240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

Your Price $399.00

240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

Specifically designed to fit in tight spaces

Your Price $399.00

250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

Your Price $399.99

240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

Your Price $399.00

240 Amp S Series Alternator for 2011 Toyota Corolla

Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

Your Price $399.99

240 Amp S Series Alternator for 2006-2011 Honda Civic

15% more efficient than typical alternators

Your Price $549.99

370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

WOW 370 AMPS! Elite series offers the highest possible amperage

Your Price $699.00

Kinetik HC600-BLU

BLU Series 600 Watt 12V High Current AGM Car Audio Power Cell

Your Price $47.94

NVX XTGSP2

Perfect for safely troubleshooting and testing audio systems

Your Price $19.99

SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

Your Price $144.95

Scosche TK12

The perfect kit for installing a car stereo and amplifier for the first time

Your Price $11.99

8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $2.49

4 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $5.99

0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $9.99

PRO Series Classic Short GM Battery Post Shoc-Krome

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $6.99

PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $5.99

200 Amp Relay Isolator (BIR200)

Great for isolating a second batter making it dedicated to the stereo system

Your Price $44.99

120 Amp 4-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $62.99

World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

Your Price $12.99

ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

Your Price $19.99

4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

Your Price $5.99

4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

Your Price $3.99

4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

Your Price $5.99

2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

Your Price $2.99

2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

Your Price $2.99

2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

Your Price $2.99

Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

Your Price $7.99

Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

Your Price $7.99

NVX VUBT2

Universal Bluetooth Audio Receiver

Your Price $45.95

NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

Your Price $59.99

Site : 247 Sonic Electronix is disabled.

Product Summary

Manufacturer

Model Number

VX600/2i

Weight

8.00lbs

Internal SKU

vx6002i

Internal Product ID

153631

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JL Audio VX600/2i

Item Added to Cart

JL Audio VX600/2i

600W RMS VXi Series Class D 2-Channel Amplifier with Built-In DSP

$1,099.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$112.99
Add Warranty
3 years of protection

JL Audio XD-PCS4-1B 4 Gauge Wiring Kit

Get a JL Audio wiring kit to match your new JL amplifier! Don't forget the RCA's!

$129.99

Add
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction

$11.99

Add
NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$24.99

Add

Don't see the accessory you're looking for?
View all available accessories for the JL Audio VX600/2i.