Garage
Shop

Kicker 10" 300W Subwoofer + Enclosure + Boss 1100W A/B Amplifier + Amp kit

300W 10" Comp Series Complete Subwoofer Bass Package

Kicker
Shop all Kicker
highlight-star-icon

• 150 Watts RMS
• 300 Watts Max
• Injection molded SoloKon cone
• Optimized Polyfoam Ribbed Surround
• Double stitched surround for enhanced durability
• Push Terminals

Learn more about the 43c104_r1100m_tc4kit8b_10tk

We apologize

This item has been discontinued

Description


Kicker brand icon

Authorized dealer

Kicker Comp 10 (43C104)

300W Peak (150W RMS) 10" Comp Series Single 4-ohm Car Subwoofer
Quantity: 1

Product Details:

  • 10" Single 4 ohms Comp Series Subwoofer
  • Power Handling:
    • Peak: 300 watts
    • RMS: 150 watts
  • SoloKon Polypropylene Cone
  • Ribbed Poly-Foam Surround
  • High-quality stamped steel basket
  • High-temp voice coil
  • Single Stacked magnet motor structure
  • Frequency Response: 30 - 500 Hz
  • Resonance Frequency (Fs): 33 Hz
  • Sensitivity: 86.2 dB
  • Recommended sealed box volume: 1 cubic feet - 2.4 cubic feet
  • Recommended ported box volume: 1.25 cubic feet - 1.75 cubic feet
  • Top-mount depth: 5 1/16"
  • Cutout diameter: 9 1/8"
  • Authorized Internet Dealer
  • 1-year Sonic Electronix Warranty

  • Priced Individually

Boss R1100M Amplifier

Riot 1100 Watt, 2/4 Ohm Stable Class A/B, Monoblock with Remote Subwoofer Control
Quantity: 1

General Features:

  • Boss Riot Series R1100M
  • Class-AB FullRange 2-Ohm Stable Monoblock Amplifier
  • MAX Power Rating:
    • 4 ohms: 550 watts x 1 chan.
    • 2 ohms: 1100 watts x 1 chan.
  • RMS Power Rating:
    • 4 ohms: 413 watts x 1 chan.
    • 2 ohms: 825 watts x 1 chan.
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Soft start turn-on
  • Speaker-level (high-level) inputs
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink for extreme heat dissipation
  • Input sensitivity:
    • Low level: 100mV - 2V
    • High level: 2V - 8V
  • Frequency Response: 9 - 50,000 Hz
  • Total Harmonic Distortion (THD): 0.01%
  • Signal to Noise Ration: 102 dB
  • Selectable crossover modes: Low Pass / Full Range
  • Variable low-pass filter: 35 - 160 Hz,/octave
  • Selectable Bass Boost: 0 to +18 dB
  • Fuse Rating: 30A x 1
  • 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 9.13"W x 10.44"L x 2.25"H
  • Authorized Platinum Internet Dealer
  • 1 year Sonic Electronix, and 5 years Manufacturer's warranty

Belva BAK82

8 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 600 Watts - RED
Quantity: 1

Product Details:

  • Complete 8 Gauge 2-Channel Amplifier Installation Kit
  • Designed for car audio systems up to 600 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Belva CCA wire is made from 30% copper while the competition uses only 10%
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • MINI-ANL Fuse holder with a 60 amp fuse offers ideal protection for high powered systems
  • Complies to American Wire Gauge standards
  • Also available in Blue
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 8 gauge power wire
  2. 3 ft. (.91 meters) Black 8 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
  6. One MINI-ANL Fuse Holder with a 60 amp fuse
  7. One Black rubber firewall grommet
  8. One 8 Gauge Red chrome plated ring terminals
  9. One 8 Gauge Black chrome plated ring terminal
  10. Three 18 Gauge Red Spade terminal
  11. Two 18 Gauge Black Spade terminal
  12. One 18 Gauge Red butt connector
  13. Ten 4" Black zip ties

Belva Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure (1TRUCK10)

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil
Quantity: 1

General Features

  • High Quality 5/8" MDF Construction
  • Gold Binding Post Terminals
  • Color: Black
  • Volume: 0.58 Cubic feet
  • Dimensions: 4-5/8"TD x 8-1/8"BD x 16-1/8"W x 13-1/2"H
  • Weight: 12 1bs
  • 30 Day return policy

Product history:

Kicker 1TRUCK10,BAK82,R1100M,43C104 thumbnail
(newest, current model)
Kicker 10C104 thumbnail
(previous model, replaced by Kicker 10" 300W Subwoofer + Enclosure + Boss 1100W A/B Amplifier + Amp kit)
Kicker 07C104 thumbnail
(previous model, replaced by Kicker Comp C104 (10C104))
Kicker 05C104 thumbnail
(previous model, replaced by Kicker C104 (07C104))
Kicker 03C104 thumbnail
(previous model, replaced by Kicker 05C104)
(previous model, replaced by Kicker 03C104 10" Comp)

Specifications & Details


Series
Series
Comp Series
Subwoofer Specifications
Subwoofer Size
10"
RMS Power Handling
150 watts
Peak Power Handling
300 watts
Woofer Surround
Ribbed Poly-Foam
Woofer Composition
SoloKön
Voice Coil(s)
Single
Impedance (Per Voice Coil)
4 ohms
Sensitivity
86.2 dB
Frequency Response
30 - 500 Hz
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

1TRUCK10,BAK82,R1100M,43C104

Weight:

30.55lbs

Internal SKU:

43c104_r1100m_tc4kit8b_10tk

Internal Product ID:

155813

Customer Ratings & Reviews



5 star
75%
4 star
21%
3 star
4%
2 star
0%
1 star
1%



Durability
4.7
Value
4.8
Features
4.6
Design
4.7
Usability
4.8

Customer Photos & Videos


Customer Reviews

Sort by:

Loading...

BAK 82

The following review is for BAK82, which is a part of the bundle you are viewing.

Nice package, quality wire but could more end connectors for the larger wire.

By Sam on June 19, 2014

160

found this helpful.

Good product

The following review is for BAK82, which is a part of the bundle you are viewing.

It's exactly what you need for your car amp installation. I bought this kit with Kenwood KAC-1502S amp for 75 bucks. Good deal from Sonic Electronix.

By Collins on January 6, 2014

148

found this helpful.

Don't know what the other guy is talking about.

The following review is for BAK82, which is a part of the bundle you are viewing.

This kit was awesome and included with my package that I bought. In comparison to others for the same price, there is simply not a comparison and the other review is just wrong on so many levels I felt compelled to write this.

The reality is there are a lot of real shoddy amp kits and wire as a whole being used in car audio in terms of cheap amp kits that have over-insulating wires and fake gauge ratings, huge amounts of aluminum, lousy RCA cables, fuse holders and other accessories. BUT and a BIG BUT, this kit excels in those areas where others fall flat on their face. I have bought a few inexpensive 8 gauge kits in my day and XScorpion, Raptor, Install Bay and others haven't even given me the 8 gauge of wire that I paid for, and in some cases gave me wire that heated up to a dangerous level due to the actual make up of the wire.

I also literally laughed when I see that the other reviewer was intending to use spade terminals to connect his amp power and ground wire... It is for the SPEAKER wire knucklehead :-). I am an installer and the smaller accessories work just fine when you use them correctly. Most amps will still work with them when used with the speaker wire. Of course one can be used for the remote wire connection to the amp and the other end with the butt connector being used to connect to the stereo. The funny thing is, if you do not need them, who cares? It is like ordering this kit for a compact car or single cab pickup. You will not use all of the power wire for these applications, so do you complain that the manufacturer gave you extra wire? That just made me laugh.

Now, onto the other accessories. The AFS fuse and holder that are included are so far superior to others in this price range and the amount of copper (albeit CCA) is much better than others in the price range. Lastly, the RCAs included are awesome for the price. I cannot find ANYTHING to complain about here for $21.99.

All in all, you will not get a better value for the money.

By Double Down on August 14, 2012

138

found this helpful.

Great kit for the cost

The following review is for BAK82, which is a part of the bundle you are viewing.

Very nice kit for $18.
Wire seems adequately thick. Good quality fuse (not AGU) and fuse holder. RCA's feel durable. Decent assortment of accessories. All together a solid budget kit IMO.

By n2audio on September 24, 2014

143

found this helpful.

Good product for the price

The following review is for BAK82, which is a part of the bundle you are viewing.

Good wiring package, good quality fuse holder and wires, I would like more connectors on it and maybe some tube for the power wire, but overall is a good kit.

By Alfredo on October 29, 2014

139

found this helpful.

Good Purchase

The following review is for BAK82, which is a part of the bundle you are viewing.

I used this kit to install a 2 channel Boss amp. The quality of the pieces in this kit is five stars, but I'm giving it 4 because it is my belief that to do a clean install you need (4) 8 gauge terminals (one at the batt, one at the amp, one at ground, one at the amp), not just two. I had to spend an extra six bucks at Orchard for the extra terminals, but since the cost of the kit here at Sonic was only $20 at the time, it was still a good deal.

By Jumbo Dumbo on December 19, 2013

130

found this helpful.

Good kit

The following review is for BAK82, which is a part of the bundle you are viewing.

Good kit for basic setups. Using it right now in my mothers system powering a simple 12. Could handle more if needed.

Pros: Handles power, Wires are HQ, More copper than rubber, Wires are good length, Fuse is HQ, Comes with lots of ties and rubbers.

Cons: None

I would recommend this kit to anyone who has a simple system. All around good kit.

By Mitch on January 31, 2014

137

found this helpful.

Great wiring kit

The following review is for BAK82, which is a part of the bundle you are viewing.

works great on my MB Quart 2x100 watt amp.

By Eric on November 29, 2013

128

found this helpful.

Good Kit

The following review is for BAK82, which is a part of the bundle you are viewing.

Great kit for the price. the price is good. Long wires.

By Joshua on December 8, 2013

129

found this helpful.

Belva BAK82

The following review is for BAK82, which is a part of the bundle you are viewing.

Worked very well for the money, great value for my system! Only thing that kept me from giving this 5 stars across the board is the design of the fuse holder and how you have to change/connect the fuse, minimal complaint.

By Dwight on April 9, 2014

125

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX QBUS8P

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(6)

$129.99

NVX QBSTA

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

$249.99

Pioneer TS-WX1210AM

• 350 watts Single 12" Subwoofer Enclosure
• 4 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 10" TD x 12-1/2" BD x 19-3/4" W x 14-7/8" H

(2)

$179.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(153)

$279.95

Belva BPKG210v2 Dual 10" Subwoofer and Amp Package with Box and Wiring Kit

• Works with both Factory and Aftermarket Audio Systems
• Dual 10" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(28)

$214.99

Related Searches


1TRUCK10,BAK82,R1100M,43C104 small

Item added to your cart.

Price: $285.99

Essential add-ons
NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$89.99

$59.99

Add to cart
Dynamat Xtreme 20' Trunk Kit 19405

20 ft. Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces

$236.95

$149.95

Add to cart
Boom Mat Damping Material (050210)

20.8 sq.ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm )

$145.81

$119.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon