Phoenix Gold SX2 600.1 (SX26001)
600W Class D Monoblock Amplifier
Get FAST answers from customers ASK a Question See questions answers
General Features:
- Class D 1-Channel Monoblock Amplifier
- RMS Power Rating:
- 300w x 1 @ 4 ohm
- 450w x 1 @ 2 ohm
- 600w x 1 @ 1 ohm
- Frequency Response: ± 6dB from 10Hz to 250Hz
- Signal to Noise Ratio: 85.9dB
- Low Pass Crossover: 12dB per Octave
- Subsonic Filter: 12dB per Octave
- Low Pass Crossover Range: 40Hz to 240Hz
- Subsonic Crossover Range: 10Hz to 120Hz
- Bass Boost: @ 40Hz 0 to +6dB
- Low Level Input Range: 300 millivolts to 8V unbalanced
- Lowest Recommended Load: 1 ohm
- Efficiency: 85%
- Damping Factor: Greater than 200
- Variable Phase Adjustment: 0 - 180°
- Recommend Power Wire Fuse: 60A
- Master/Slave strappable for huge power and multi-amp setups
- Includes Remote Bass and Phase Control (RBPC) with BASS SHIFT® : Yes
- Switchable Auto-Turn On: Yes
- Audio Precision Quality Control Verification
- RMD port allows you to add a remote monitoring display, giving you a visual of the voltage of your system
- Double tier power supplies with OTM Onboard Thermal Management, which monitors the amplifiers internal temperatures
- RCA pass-through outputs
- Auto-turn on circuit (defeatable) helps when connecting to an OEM system that does not offer a Remote turn-on lead to activate the amplifier
- Switchable balanced or unbalanced inputs based on your input source's design for best signal to noise performance
- Tri-light LED amplifier status indicators with short circuit, thermal and voltage protection
- 4-gauge power and ground wiring is recommended for installation. Contact our Sales team for information regarding a discount on select amplifier kits when purchased together with this amplifier
- Speaker Terminal: 10 Gauge
- Dimensions (L x W x H): 13.25" L x 8.5" W x 2.0" H - 337mm L x 216mm W x 51mm H
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
View the Phoenix Gold SX2 600.1 Product Manual for complete details!
Power Specifications - Subwoofer Channel
Amplifier Specifications
An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.
Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.
Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.
Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.
The RMS output figure is much more accurate than the peak rating when comparing products.
A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.
When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.
Subsonic
The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.
- RMS Power
- Signal-to-Noise Ratio
This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.
Authorized Dealer
What is in the box?
Wireless remote
Warranty and Return Policy
Great amps need great wire at a great price. This amp kit has everything you need!
Your Price $29.99
BB1D 1.0 Farad Capacitor + BAK42BK Complete 4 Gauge Amplifier Wiring Kit
Your Price $57.99
The reviews speak for themselves, this is awesome wire with everything you need!
Your Price $69.99
Get a high quality amp kit from Stinger to get the most from your new amp!
Your Price $64.99
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
Your Price $129.99
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
Your Price $129.99
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
Your Price $11.99
16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology
Your Price $24.99
17 ft. of 2-Channel 4000 Series RCA Interconnect Cable designed for the Audiophile
Your Price $11.99
25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
Your Price $24.99
25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
Your Price $17.99
Comes with everything you need to upgrade your power and ground wire.
Your Price $79.99
Features everything needed to upgrade factory power and ground wire.
Your Price $34.99
Most Popular! 270+ amps at anything above 1800 rpm engine speed!
Your Price $446.99
240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology
Your Price $399.00
Specifically designed to fit in tight spaces
Your Price $399.00
Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink
Your Price $399.99
6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators
Your Price $399.00
Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections
Your Price $399.99
15% more efficient than typical alternators
Your Price $549.99
WOW 370 AMPS! Elite series offers the highest possible amperage
Your Price $699.00
This is a must have! Set your crossover frequency like a Pro
Your Price $148.99
Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)
Your Price $2.49
Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)
Your Price $5.99
Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)
Your Price $9.99
Side post battery adapter for GM type batteries (Positive or Negative)
Your Price $5.99
Great for isolating a second batter making it dedicated to the stereo system
Your Price $44.99
Prevents primary battery discharge and extends battery life
Your Price $62.99
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Your Price $5.99
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
Your Price $3.99
Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses
Your Price $5.99
ANL 100A Nickel plated for better power transfer
Your Price $2.99
Two fuses per order. High quality 200 Amp ANL Fuses
Your Price $2.99
Two fuses per order. High quality 300 Amp ANL Fuses
Your Price $2.99
Great for amplifiers that do not accept a large gauge power wire
Your Price $7.99
Great for amplifiers that do not accept large gauge power wire
Your Price $7.99
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
Your Price $9.99
• Class D Topology
• Small Footprint Chassis Design
• Remote Bass Controller Included
• Robust Unregulated Power Supplies
• Rotatable Badging for installation flexibility
• High level Inputs for Easy OEM Integration
• Audio Precision® Quality Control Verification
Your Price $389.00
• Class A/B Topology
• Small Footprint Chassis Design
• Remote Bass Controller Included
• Robust Unregulated Power Supplies
• Rotatable Badging for installation flexibility
• High level Inputs for Easy OEM Integration
• Audio Precision® Quality Control Verification
Your Price $189.00
• Class D Topology
• Small Footprint Chassis Design
• Remote Bass Controller Included
• Robust Unregulated Power Supplies
• Rotatable Badging for installation flexibility
• High level Inputs for Easy OEM Integration
• Audio Precision® Quality Control Verification
Your Price $239.00
• 750 Watt 5 Channel Full Range Class D Amplifier
• Small Footprint Chassis Design
• Remote Bass Controller Included
• Robust Unregulated Power Supplies
• Rotatable Badging for installation flexibility
• High level Inputs for Easy OEM Integration
• Audio Precision® Quality Control Verification
Your Price $389.00
• 1200W RMS Monoblock Subwoofer Amplifier
• Variable phase output
• Audio Precision Quality Control Verification
• Remote bass and phase controller with Bass Shift® (RBPC)
• Switchable balanced or unbalanced inputs
• Power/Ground Wire Size: 4GA
• Tri-light LED amplifier status indicators
Your Price $659.00
• 4 ohms: 100 watts x 2 chan
• 2 ohms: 150 watts x 2 chan
• Bridged, 2 ohms: 400 watts
Your Price $359.00
• Class D SX Series 4 Channel Amplifier
• Total RMS Power : 800w
• Audio Precision Quality Control Verification
• Tri-light LED amplifier status indicators
• Onboard Thermal Management
• Power/Ground Wire Size: 4GA
• Bass Boost: @ 40Hz 0 to +6dB
Your Price $499.00
• 1200W RMS 6 Channel Amplifier
• Variable phase output
• Strappable
• Remote bass and phase controller with Bass Shift® (RBPC)
• Switchable balanced or unbalanced inputs
• Power/Ground Wire Size: 4GA
• Tri-light LED amplifier status indicators
Your Price $659.00
• 400 Watt 4 Channel Class A/B Amplifier
• Small Footprint Chassis Design
• Robust Unregulated Power Supplies
• Rotatable Badging for installation flexibility
• High level Inputs for Easy OEM Integration
• Audio Precision® Quality Control Verification
• Class A/B Topology
Your Price $239.00
Product Summary
Manufacturer
Model Number
SX2600.1
Weight
9.00lbs
Internal SKU
sx26001
Internal Product ID
165309
Why shop Sonic?
Real Service Powered by Real People
Customer Testimonial
Wiring Diagram Legend
Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.
Product Name: Phoenix Gold SX2 600.1 (SX26001)
