Focal IS690TOY 2-Way 6x9” Component Kit for Toyota (75 W RMS)
*Exclusions

Focal IS690TOY

2-Way 6x9” Component Kit for Toyota (75 W RMS)

Special Order. Ships at Later Date
|
Sales Rep

Call Our Pros For The Best Price Guaranteed!

Monday- Friday 9am-6pm EST
888-973-6686

List price $380.00

You Save: $80.01 (21.06%)

Thanks , You Pay:

$299.99

with warranty A Pair

Add an Extended Warranty

SquareTrade Product Warranty
60-Day Money-Back

Hassle Free Returns

365-Day Coverage

Warranty assistance for a year

Bundles with this Product

=

FREE Sound Damping Kit to stop the rattles/vibrations!

Add a Free NVX SDSK2 Sound Dampening Speaker Kit to your Speaker purchase and save $15. Simply click the "Add Both to Cart" button. This offer cannot be combined with any other coupons or offers.

14.99

172159

158

Focal IS690TOY

$299.99

+

100% OFF

NVX SDSK2 - 90mil 2.3mm THICK

$14.99

Special Price $0 ($14.99 if purchased separately)

NVX SDSK2 - 90mil 2.3mm THICK

• Eliminates Road Noise
• 2.3mm (90.55mil) thick for better performance
• Quiets Vibrations
• Stops Annoying Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Peel and Stick Installation
• Two 10" x 10" Pieces

(Offer 1 of 1)

Combined Total Price

$299.99

You Save $14.99


PLUG & PLAY LINE

Enjoy the pleasure of ‘Plug & Play’ installations 100% compatible with factory systems. You can replace your audio system yourself, and with great ease, thanks to these kits designed especially for your vehicle.


2-Way 6x9” Component Kit for Toyota

The two-way component speaker drivers kit IC 690TOY is designed with elliptical suited for the front or rear factory locations in Toyota® vehicles. The IC 690TOY has been designed respecting the factory acoustic of the brand’s vehicles and allows thus to benefit from an optimal musicality in a few steps only. Forget the factory sound of your car, discover the neutral and precise Focal sound on the road and 100% Plug & Play.

Car Compatibility*:

  • Prius
  • Camry
  • Tacoma
  • Tundra
  • FJ Cruiser

*Non-exhaustive list of vehicles, subject to adaptation of the tweeter and the connector, depending on the countries and models

Product Details

  • Peak Power: 150W
  • RMS Power: 75W
  • Impedance 4Ω
  • Sensitivity (2.83 V/1 m) 92 dB
  • Frequency Response: 50-20000 Hz
  • Fiberglass Cone
  • Aluminium inverted dome tweeter
  • 100% plug and play (original connectors)
  • Easy installation

Dimensions

  • Voice Coil Diameter: 30mm (1-3/16")
  • Magnet: 85mm (3-1/3")

Speaker Specifications

Series
This is the manufacturer product line of speakers.
Plug & Play
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6" x 9"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Inverted Dome
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
1"
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Aluminum
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Fiberglass
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
150 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
75 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
92 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
50 - 20000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Number of Speakers
This is the number of speaker that is included in the package. Each purchase will result in receiving the number of speakers indicated here. Please note that some items will have multiple woofers in the same enclosure. For sets of component speakers, this number will refer to the number of sets of speakers (For example, 2 would indicate the purchase includes 2 woofers and 2 tweeters).

Please refer to the product image and description for further details about the speaker.

2

What is in the box?

WITB: Speakers
A detailed list of the equipment (main product and accessories) included with your speakers. If special accessories are included in the main box, they will be listed and detailed below the main list of equipment.
Speakers (2)
Tweeters (2)

Authorized Dealer

Authorized Dealer
We're an Authorized Dealer for nearly all the brands and manufacturers we sell. In the rare occasion we are not authorized, we guarantee that the product comes from an Authorized dealer or distributor. As such, we will always assist you even past the return policy to assure you the entire manufacturer warranty is covered in the event you have encounter a manufacturer defect.
Authorized Dealer

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
VIP Guarantee

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

NVX XTGSP2 Tone Generator and Speaker Polarity Tester

Perfect for safely troubleshooting and testing audio systems

Your Price $19.99

Encore Universal Four Door Power Door Lock Kit

Add Power Door Locking and Unlocking while you have the Door Panels removed

Your Price $30.99

NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

Your Price $44.99

Dynamat Xtreme Door Kit 10435

Enough sound dampening to cover most doors!

Your Price $64.99

Stinger Roadkill Door Kit

Use this to eliminate rattle from your doors!

Your Price $49.99

NVX Sound Dampening Rubber Roller

Install your Sound Dampening with ease using this heavy duty rubber roller!

Your Price $7.99

Universal 6"x9" Speaker 1" Depth Extender

Speakers too deep for your installation location? Add an extra inch of space with these depth extenders.

Your Price $9.95

NVX XBAF69 6" x 9" Speaker Baffle Ring Kit

(Best Seller) Reduce panel vibration, increase midbass, reduce destructive waves, and get better sound!

Your Price $20.99

Roadkill 6X9" FAST Rings

Creates a tight seal around the speaker for enhanced audio quality and imaging.

Your Price $22.99

XTC 6" x 9" Foam Speaker Baffles

Compresses and forms to the shape of most installations and reduces panel vibrations.

Your Price $10.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $6.99

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $11.99

Atrend 6X9PR

1 Pair of 6" X 9" Speaker Boxes Made with 3/4" Hardwood MDF

Your Price $29.99

Product Summary

Manufacturer

Model Number

IS690TOY

Weight

8.00lbs

Internal SKU

is690toy

Internal Product ID

172159

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Focal IS690TOY

Item Added to Cart

Focal IS690TOY

2-Way 6x9” Component Kit for Toyota (75 W RMS)

$299.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$32.99
Add Warranty
3 years of protection

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

$14.99

Add
NVX XTGSP2 Tone Generator and Speaker Polarity Tester

Perfect for safely troubleshooting and testing audio systems

$19.99

Add
NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

$44.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Focal IS690TOY.