Garage
Shop

Hifonics BXi 2010D

2000W RMS, Brutus BXi Series Class D Monoblock Amplifier (BXi2010D)

Hifonics
Shop all Hifonics
Product videos
highlight-star-icon

2000W RMS, Brutus BXi Series Class D Monoblock Amplifier • 650W x 1 Chan. @ 4 Ohms • 1300W x 1 Chan. @ 2 Ohms • 2000W x 1 Chan. @ 1 Ohms • Super D-Class • Tuned Bass EQ • 1 Ohm Stable • Balanced Line Input

Learn more about the bxi2010d

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

brx20161d thumbnail

Hifonics Brutus BRX2016.1D Monoblock Amplifier

OUR PRICE: $229.95

View item

Product Highlights


2000W RMS, Brutus BXi Series Class D Monoblock Amplifier • 650W x 1 Chan. @ 4 Ohms • 1300W x 1 Chan. @ 2 Ohms • 2000W x 1 Chan. @ 1 Ohms • Super D-Class • Tuned Bass EQ • 1 Ohm Stable • Balanced Line Input

Description


Hifonics brand icon

Authorized dealer

Brutus: The King of D-Super

When it comes to class D monoblock amplifiers, Brutus amplifiers are truly the king of D class. Brutus BXI amps are considered some of the best amplifiers in the world and the new Super-D Class Brutus amplifiers reinforce that. The D-Class digital chip-set technology produces extremely efficient, low temperature, and a high amplification system resulting in a smooth digital to analog conversion with low distortion. The amplifiers stable at 4, 2, and 1 Ohm(s). All in all, that means that the amp will produce more output with less stress on the car's battery and charging system.

  • Brutus BXI Single-Channel Monoblock Super-D Class Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 650 watts x 1 chan.
    • 2 ohms: 1300 watts x 1 chan.
    • 1 ohm: 2000 watts x 1 chan.
  • MOSFET Power supply
  • Super D-Class amplifier relies on a super-speed enhanced chip-set to produce higher current capacities and more precise digital to analog conversions
  • Wired remote bass level control included
  • Power and Protection LED indicators
  • Built-in system diagnostics offer protection of DC, Speaker short, terminal, and overload
  • Tuned Bass EQ (0-10 dB bass boost at 45 Hz)
  • Dampening factor: >250
  • Single-channel monoblock channel operation
  • 1-Ohm stable
  • Phase shift: 0-180 degrees
  • Preamp RCA outputs
  • Input level control: 0.04V - 18V
  • Balanced line input for MX accessories and line drivers
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • RCA level inputs
  • Screw terminals
  • Variable low-pass filter (35-250 Hz, 24 dB/octave)
  • Subsonic Filter (15-35 Hz at 24 dB)
  • Frequency response: 35-250 Hz
  • Dimensions: 15"L x 9-1/2"W x 2-1/2"H
  • 1/0-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • 1-year SonicElectronix.com warranty

Product history:

Hifonics BRX2016.1D thumbnail
(newest, current model)
Hifonics BRX2000.1D thumbnail
(previous model, replaced by Hifonics Brutus BRX2016.1D Monoblock Amplifier)
Hifonics BRZ2100.1D thumbnail
(previous model, replaced by Hifonics Brutus BRX2000.1D (FREE Upgrade to BRX2016.1D))
Hifonics BXi2010D thumbnail
(previous model, replaced by Hifonics Brutus BRZ2100.1D)
Hifonics BXi2008D thumbnail
(previous model, replaced by Hifonics BXi 2010D)
Hifonics BXi2006D thumbnail
(previous model, replaced by Hifonics BXi 2008D)
Hifonics BX2005D thumbnail
(previous model, replaced by Hifonics BXi 2006D)

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
650 watts x 1 channel
RMS Power @ 2 ohms
1300 watts x 1 channel
RMS Power @ 1 ohm
2000 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
2000 watts
Maximum Input Gauge Size
1/0 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
0.08%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
35 - 250 Hz
Subsonic Filter
15 - 35 Hz
Signal-to-Noise Ratio
95 dB
Bass Boost
0 - 10 dB
Remote bass/level controller
Yes
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Item Details


Manufacturer:

Model Number:

BXi2010D

Weight:

15.00lbs

Internal SKU:

bxi2010d

Internal Product ID:

17654

Product and How-to Videos


Customer Ratings & Reviews



5 star
86%
4 star
9%
3 star
5%
2 star
0%
1 star
0%



Durability
4.7
Value
4.9
Features
4.8
Design
4.7
Usability
4.8

Customer Reviews

Sort by:

Loading...

JUST GOT MY BXI 2010D TODAY!

CANT WAIT TO SEE WHAT THIS BAD BOY CAN DO! SHIPPING WAS FAST AND THE PACKING WAS GREAT! BE LOOKING FOR ME ON YOUTUBE GUYS! HAHA! THANKS SONIC ELECTRONIX! WELL MOST DEFINITELY BE DOING BUSINESS WITH YOU GUYS AGAIN VERY SOON.

ALEX .V

By ALEX .V on October 14, 2009

20

found this helpful.

Holy ****!!!

This amp is amazing I love this thing. im running a re sx. Wired down to 1 ohm this amp can play all day long and not get over heated. I have not had any problems with it.

By jimmy on September 13, 2009

19

found this helpful.

beast

have this powering a 12" hifonics olm1612 and its one hellz of a set up

By trent on February 18, 2010

18

found this helpful.

SICK

i had the 2008D on 2 type r subs and i have never heard anything that pounded harder the only reason i gave it a 4 in durability is because fedex dropped it or something when it was shipped because there was a loose piece inside it but it still worked for a couple months until the loose piece shorted on the connections inside the amp and fried it. If it wasn't for fedex i would still be slumpin right now

By zayres29 on December 13, 2009

19

found this helpful.

BEST AMP I EVER.!

THANX SONICELECTRONIX.. THIS HAS BEEN THE BEST AMP EVER. I HAVE IT HOOKED UP TO 2 12" KICKER L7'S AND THEY POUND HARD... =) I WAS ABLE TO GET IT UP TO 130 BD INSIDE MY G35... THANX FOR SUCH A GREAT PRODUCT..

By Carlos on October 25, 2009

19

found this helpful.

(:

I'll give this particular amp 5 stars all the way across.

I was also skeptical of this amp's performance because some people had made Hifonics out to be 'cheap'

I'll tell you one thing, they were wrong. This amp has miles of power, I had it hooked up to an Audioque HDC315 in a 3.6cu ft box tuned to ~36hz in a 2007 Infiniti G35 sedan with stock electrical, down to one ohm. It absolutely HAMMERED the lows thanks to the plentiful power coming out of this thing. Broke my damn sunroof motor, it's permanently cracked open.

Looks good at night, cool blue haze coming out of my trunk, and the black finish is sweeeeet; the bass knob is wonderful.

Very, very happy with my purchase.

By Kevin on May 10, 2009

18

found this helpful.

well worth the money

I recently purchased the 2010D to power my 2 JL W3V2's in my 2002 Hyundai Sonata. I was somewhat skeptical towards Hifonics because they do not seem as mainstream as other brands, and a lot of people bash on their products.
before receiving the amp, i had a HO 200 amp alt. installed and i installed a Kinetik hc1400 under my hood and another Kinetik hc 800 in the trunk along with a stinger 80 amp relay. I feel that if you have the proper power running to it, this amp will definitely put out the rated power it states, maybe even more! it also helps if it is tuned right (obviously).
At first i thought that it was way over-rated, but then i realized one of the 2 100 amp fuses going in between my batteries was blown, and after replacing that and letting my back battery to charge, it is so LOUD!!!
my current set up is set at 4 ohms, so 650 watts RMS according to the factory specs. Personally, I think its pushing maybe 700-730 watts continuous. its temporary until i can upgrade my wires from 4awg to 0 and put in an Orion HCCA 12.2 @ 1 ohm :) it should be interesting!

something i wish it had, though, is like a control to set what frequency the bass boost hits hardest at (like the JL amps do). I used to own a 500/1, and it was a nice feature. I wonder if there is something out there that can help me out? that would be nice for when my HCCA gets installed.

overall I feel its well worth the money if you have the right set up and proper power going to it.

By Bradley on May 4, 2009

18

found this helpful.

Great amp, great performance, great price!!!

I heard some mixed reviews that this amp is overrated. So I took it to a local shop to be tested. At 14.4 volts it was on the money. He dropped it to 13.8 volts & at 4 ohms 634 watts rms, at 2 ohms 1242 watts rms, and at 1 ohm 1896 watts rms. Not bad for a $275 dollar amp. It does its rated at 14.4 which is where they test them. I have mine running 2 Alpine Type R 1022D's @ 2 ohms and they pound...Highly recommend this amp if your on a budget

By Jeremy on March 7, 2010

18

found this helpful.

Great bang for the buck

This is a great buy for the cost. At 14 volts I scoped this amp at 1752 watts at a 1 ohm load. Does a good job at not overheating and does its job well.

By Joe on December 24, 2009

18

found this helpful.

Great amp for the money

I bought one of these a few months ago and it is an excellent amp for the money. After being tuned in with an oscilloscope it was putting out 1752 watts RMS with no clip. Wonderful amp for the money. Just make sure you have it installed and tuned correctly.

By J Monay on November 18, 2009

18

found this helpful.

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(38)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(28)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(10)

$399.96

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Related Searches


BXi2010D small

Item added to your cart.

Price: $274.99

Essential add-ons
Belva BAK02 1/0 Gauge Amp Wiring Kit

The perfect kit for your perfect amp!

$69.99

$44.99

Add to cart
Belva BAK02BL

1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - BLUE

$69.99

$44.99

Add to cart
Stinger SSK0

1/0 Gauge Amplifier Wiring Kit with 2-Channel RCA's

$93.00

$39.95

Add to cart
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$18.99

$12.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
SHURiKEN SK-BT100

12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts

$349.99

$329.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
Belva BB2D

2.0 Farad Capacitor with Digital Red Display

$89.99

$39.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

$14.00

$7.99

Add to cart
0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

$9.99

$4.99

Add to cart
2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

$9.99

$4.99

Add to cart
(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

$11.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon