Garage
Shop

MB Quart NAU 660

540W Max, Nautic Series 6-Channel Marine Amplifier (NAU660)

MB Quart
Shop all MB Quart
highlight-star-icon

Nautic Series 6-Channel Class A/B Marine Amplifier • UV And Salt Water Resistant • 60W x 6 Chan. @ 4 Ohms • 90W x 6 Chan. @ 2 Ohms • Full Range Line Outputs • 4-Way System Protection • Gold-Plated RCA Level Inputs

Learn more about the nau660

We apologize

This item has been discontinued

Description


MB Quart brand icon

Authorized dealer

  • Nautic Series 6-Channel Class A/B Marine Amplifier
  • RMS Power Rating:
    • 4 ohms: 60 watts x 6 chan.
    • 2 ohms: 90 watts x 6 chan.
    • Bridged, 4 ohms: 180 watts x 3 chan.
  • Max power output: 360 watts
  • MOSFET PWM power supply
  • UV and salt water resistant paint, silk screen and heat sink enclosure
  • Marine-grade conformal coated circuit boards resist corrosion from salt spray and moisture
  • Non-corrosive brushed aluminum casing
  • Conforms to the American Boat and Yacht Council (ABYC) marine electronic standards
  • LED power and protect indicators
  • Bass Boost (0-6 dB bass boost at 45 Hz)
  • 2/1 channel operation
  • Full range line outputs
  • 4-Way system protection circuitry (DC, short, thermal, overload)
  • Heavy duty aluminum alloy heatsink
  • Gold-plated RCA level inputs
  • Gold-plated screw terminals
  • Variable high-pass filter (40-250 Hz)
  • Variable low-pass filter (40-250 Hz)
  • Variable frequency: 40-250 Hz
  • Variable input level control (0.2V-6V)
  • Damping Factor: 180
  • Dimensions: 18-3/4"L x 9-1/2"W x 2-1/8"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • 1-year SonicElectronix.com warranty

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
60 watts x 6 channel
RMS Power @ 2 ohms
90 watts x 6 channel
RMS Power @ 1 ohm
180 watts x 3 channel
Amplifier Specifications
Amplifier Class
A/B
Number of Channels
6-Channel
Total Peak Power Output
540 watts
Total RMS Power Output
540 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
.05%
Speaker Level Inputs
No
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
40 - 250 Hz
Low-Pass Crossover Frequency
40 - 250 Hz
Signal-to-Noise Ratio
93 dB
Channel Separation
80 dB
Bass Boost
0 - 6 dB
Remote bass/level controller
No
Fuse Rating
70A x 1 
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

NAU660

Weight:

14.00lbs

Internal SKU:

nau660

Internal Product ID:

17760

Customer Ratings & Reviews



5 star
64%
4 star
36%
3 star
0%
2 star
0%
1 star
0%



Durability
4.7
Value
4.9
Features
4.8
Design
4.5
Usability
4.9

Customer Reviews

Sort by:

Loading...

good app

This app runs really good it is a great value or the money

By mrfixit on April 9, 2011

9

found this helpful.

The Amaizin MB Quart NAU 660

What should I say, Maxxsonics has impressed me with their amplifiers. I bought the MB Quart Q4.150 in December for my car and it has been so impressive!! It plays so clean and brings out the little details that a lot of amps leave out. I can say the same about the MB Quart NAU 660 that I bought for my boat. The surround sound is so full I would say that this amp has been under rated. When it comes to amps those that are CEA Compliant are great quality from Maxxsonics. I would recommend this amp and any other amp from Maxxsonics to anyone.

By Mittchy Shotta on March 25, 2012

7

found this helpful.

Great Amp

I have used the amp for 4 months now. Plenty of power to drive 4 full range and a sub no matter what the volume. Also i found Sonic great to deal with.

By Peter on September 24, 2010

7

found this helpful.

Quality Amp

Nice Amp, well designed flexible worth the money and dose a good job powering six 6.5's and a tube sub. 2-45rms 4-35rms 75rms sub

By Big Bite on December 4, 2009

6

found this helpful.

awesome

Real good quality amp makes them speakers in the boat scream.

By Trenton on November 3, 2009

6

found this helpful.

nau 660

works great but is too heavy .

By lanchon on April 8, 2009

6

found this helpful.

Good value for the money

I bought this amp as a low cost way to power my kmt6's. I was pleasently surprised, it works very well and I've had no issues with the unit. I currently am running it bridged to 3 channel with plans to add a sub next year. I would recommend this to someone on a budget looking to build a decent marine system

By Spdfreak on January 11, 2013

5

found this helpful.

Quality

I've had this amp for about a year. This thing is just enormous. It's roughly the size of a full-sized computer keyboard. I have mine powering 6 infinity in-cab 2-way speakers. 4 6x9's and 2 3 1/2's. It sounds great but I did notice when trying to tune more mid bass into the door speakers while trying to get more "highs" from the dash speakers if adding just a bit more gain to either channel seems to fall off a perpetual cliff. And seems to cut bass completely from the 2nd channel. If I back off on either gain level its fine. This could also be an issue with my electrical system. Because I use this amp exclusively for my in cab speakers, my sub is driven by a separate amp. This amp actually draws 10 more amps of current than my sub amp and as a result of that extra draw could be the reason the amp ceases to push bass at higher gain/volume levels.

Nothing I stated above should have any negative impact on anyone's decision to purchase this monster. Its heavy, its big but best of all it is impressive. I love the way I can tune 6 channels, that is why I purchased it. My car only had 4 speakers and I wanted to add 2 more and not have them pushed by the stereo and have to have bass blockers. I went the more technical and difficult route just to custom tune each channels behavior.

This amp is also as reliable as a watch, it just works. I live in Fl and it can get blazing hot and this thing no matter where its mounted will keep going. It does get warm even being in a dynamatted trunk in the middle of summer but it keeps going.

Lets see, other than the aforementioned details for what you get, it is an absolute steal. Get one!

By Taylor on January 20, 2013

4

found this helpful.

Great Amp

I bought this amp based upon the reviews that I read here, and around the internet. EXCELLENT unit. I'm running 4 MB Quart Nautic NKF-692's and an MB Quart RLP-254 10" Sub and it sounds truly amazing. I'm not one for super loud music or thumping, vibrate-your-boat-apart bass, but wanted more of a quality sound at high volume so as to hear it better over my boat's engine. The cons are: Labeling. Everything could stand to be a bit larger, but that could be my own eyes failing me! Also be cognizant of the fact that the + & - are staggered on speaker connection side, meaning that all the + are not on the bottom with the "-" on top, etc. The unit is big and heavy, but I didn't have any issues installing it. It didn't get as hot as I thought it would, which is another plus.

By Rick on August 5, 2012

4

found this helpful.

Great Product

I was hesitant to buy this product as well as the NAU 460 that I bought at the same time. I knew MB Quart was a solid speaker company, but was not familiar with their amps. I bought these two amps to drive 10 seperate Polk Audio speakers in my boat (six in the boat, 4 on wakeboard tower), driven by an Alpine head deck. All I can say is WOW! I can run my system at Volume level 31 out of 35 with no detectable distortion and solid quality sound. I have had my boat out probably 20-25 times since the install, and have not gone easy on the amps, and so far they are still performing perfectly. The only issue I had on the install, was the speaker connection configuration is different between the 460 and 660, so if you happen to get one of each pay extra attention to the wiring diagram. I am one very pleased customer, and already have recommmended these amps to friends who love the way my system sounds.

By Ron on June 3, 2012

4

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(28)

$214.99

NVX VAD10004

• 150 watts x 4 channel @ 4 ohms
• 250 watts x 4 channel @ 2 ohms
• Bridged: 500 watts x 2 channel @ 4 ohms
• Total RMS Power: 1000 watts
• CEA-2006 Compliant
• Class D 2 ohms Stable 4-Channel-Channel Amplifier

(14)

$279.99

NVX MVPA6

• 100 Watts RMS x 6 @ 4 ohms
• 150 Watts RMS x 6 @ 2 ohms
• CEA-2006 Compliant
• Weatherproof Amplifier
• Micro Amp
• 12.9"W x 4.4"L x 1.7"H

(3)

$299.99

NVX VADM4

• 400 Watt True RMS Output!
• Marine Certified 4-Channel Micro Class D Amplifier
• 75W x 4-Chan. @ 4 ohms
• 100W x 4-Chan. @ 2 ohms
• 3-Way System Protection
• 4/2 Channel Operation
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint!

(31)

$189.99

JL Audio MX600/3

• 75 watts x 2 channel + 250 watts x 1 channel @ 4 ohms
• 100 watts x 2 channel + 400 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms + 400 watts x 1 channel @ 2 ohms
• Total RMS Power: 600 watts
• Class D 2 ohms Stable 3-Channel Amplifier

(3)

$499.99

Related Searches


NAU660 small

Item added to your cart.

Price: $129.99

Essential add-ons
Belva BAK46

Complete 6-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$89.99

$44.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon