Spend $200+ & Get $20 SonicBux in August More Info

Pyle Pro PZR6XA (PZR-6XA)

2200W Peak, Power Amplifier For Use with All Mixers and PA Systems


We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Product Features

  • Professional Power Amplifier
  • Stereo Mode Power Rating:
    • 8 ohms: 70 watts x 2 chan. (20 - 20,000 Hz)
    • 4 ohms: 100 watts x 2 chan. (1,000 Hz)
    • 8 ohms: 110 watts x 2 chan. (max power)
    • 4 ohms: 130 watts x 2 chan. (max power)
    • 8 ohms: 1100 watts x 2 chan. (peak power)
  • Bridged Mode Power Rating:
    • 8 ohms: 175 watts x 2 chan. (20 - 20,000 Hz)
    • 8 ohms: 200 watts x 2 chan. (1,000 Hz)
    • Peak power: 2200 watts x 1 chan.
  • Channel 1 and 2 output level controls with power LED display
  • Signal indicators light up when there is a signal present
  • Clip circuit and indicator circuitry protect the amplifier and speaker system from being damaged by overpowering current levels by indicating lights that remind the user when the output is excessive
  • Protection circuit indicator will be illuminated when the amplifier is powered on and at the turn-on delay status, overload, or if the amplifier is experiencing abnormal heat
  • Speaker terminals will allow the hookup of one pair of stereo speakers, or a single bridged speaker
  • Stereo/Mono Switch permits you to select a conventional stereo operation with a stereo input signal or a bridged mono input mode
  • Rear jacks lets you connect a variety of audio input sources by the balanced (XLR/6.35mm phone jack combo) or unbalanced RCA inputs
  • Heavy duty fan cooling system automatically activates when the system is powered on and aids the overall performance by cooling down the operating temperature
  • Power on/off switch
  • Dual colored LED for simple guided display
  • Banana plug ready
  • Ground lift switch
  • Frequency response: 10 - 50,000 Hz
  • Input sensitivity: 1.0 V
  • Signal-to-noise ratio: 100 dB
  • Dimensions: 10-11/16"L x 19"W x 3-15/32H
  • 2-year Manufacturer's warranty

Power Specifications

Number of Channels
This is the number of channels that the professional amplifier is designed to power.
2 Channels
Continuous Power @ 8 ohm
This is the continuous (RMS) power output of the amplifier at an 8 ohm impedance.
70 watts x 2 channels
Continuous Power @ 4 ohm
This is the continuous (RMS) power output of the amplifier at an 4 ohm impedance.
100 watts x 2 channels
Continuous Power @ 8 ohm (Bridged)
This is the continuous (RMS) power output of the amplifier at a bridged 8 ohm impedance.
175 watts x 2 channels
Total Continuous Power
This is the total continuous power rating (RMS) that the amplifier is able to output.
350 watts

Amplifier Specifications

Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
100 dB
Frequency Response
The range of frequencies the amplifier will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
10 - 50000 Hz
Input Sensitivity
This is the input sensitivity of the amplifier.
1 volts
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
Voltage Gain
This is the voltage gain of the amplifier measured in decibels.
100 dB
Cooling Options
These are the different cooling systems used in the amplifier to keep it cool.
Cooling Fan
These are the type of input connections that the amplifier has.
1/4" TRS
These are the types of output connections that the amplifier has.
Binding Posts (Banana Clip Ready)

Physical Specifications

The height of the item, measured from top to bottom, in inches.
The width of the item from left to right (side-to-side) measured in inches.
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Weight (Pounds)
This is the weight of the item in pounds (lbs).
18.5 lbs
Rackmount Spaces
This is the total number of spaces that the preamplifier will occupy when mounted on a rack.

Specials with this Item

Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
2 years
Labor Warranty Duration
2 years
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating


Stedman, NC

Great Value

May 3, 2011

Reliable, affordable and easy to use. Would recommend to any interested buyer.

4 of 6 found this helpful

Was this review helpful to you?

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary


Model Number






Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Pyle Pro PZR6XA (PZR-6XA)

Item Added to Cart

Pyle Pro PZR6XA (PZR-6XA)

2200W Peak, Power Amplifier For Use with All Mixers and PA Systems


Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection