Garage
Shop

Kenwood KAC-9105D

900W RMS Class D Monoblock Performance Series Amplifier

Kenwood
Shop all Kenwood
Product videos
highlight-star-icon

• RMS: 500 x 1 @ 4 ohms, 900W x 1 @ 2 ohms, >900W x 1 @ 1 ohm
• Total Peak Power: 1800W
• CEA-2006 Compliant
• Bass Boost: 0 - 18 dB at 40 Hz
• Class D Circuitry
• Dimensions: 13-3/4"L x 2-5/16"H x 9-3/8"D

Learn more about the kac9105d

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

kac9106d thumbnail

Kenwood KAC-9106D

OUR PRICE: $299.00

View item

Product Highlights


• RMS: 500 x 1 @ 4 ohms, 900W x 1 @ 2 ohms, >900W x 1 @ 1 ohm
• Total Peak Power: 1800W
• CEA-2006 Compliant
• Bass Boost: 0 - 18 dB at 40 Hz
• Class D Circuitry
• Dimensions: 13-3/4"L x 2-5/16"H x 9-3/8"D

Description


Kenwood brand icon

Authorized dealer

Kenwood KAC-9105D

KAC Car Amplifiers

Certified Output and Reliable Efficiency

High powered subwoofer applications tend to generate plenty of heat to the amplifier powering them. Music can only be enjoyed when an amplifier is on, and when an amplifier reaches high temperatures it will usually shut off to protect it from damage. The Kenwood KAC-9105D has built-in self-activating fans to protect from high temperatures so your system can play longer without having forced intermissions. That means even under stressful conditions, the built in fans will aid the heatsink to effectively cool the amplifier.

With an impressive output rating of 500 watts RMS x 1 Channel at 4 Ohms, and 900 watts RMS x 1 Channel at 2 Ohms, this amplifier is CEA-2006 compliant so all wattage specifications are true to industry standard. The Kenwood KAC-9104D also has the Capability for a 1-Ohm load to achieve over 900 watts RMS! Combined with their total efficiency and high power output, the Kenwood KAC-9105D is the perfect option for any compatible subwoofer application!


General Features:

  • Performance Series Class D Monoblock Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 500 watts x 1 chan.
    • 2 ohms: 900 watts x 1 chan.
    • 1 ohm: >900 watts x 1 chan.
  • Max power output: 1800 watts x 1 chan.
  • Digital amplifier technology
  • Dual mono driver ready
  • MOSFET power supply
  • LED power indicator
  • Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
  • Stackable operation capable
  • Phase inverter (0°,180°)
  • Speaker-level inputs with signal sensing for automatic turn-on
  • Preamp RCA outputs
  • Line output terminals for extension
  • Short circuit, DC offset, overload, and thermal protection circuitry
  • Aluminum die cast heat sink
  • Built-in cooling fan
  • Gold-plated RCA level inputs
  • Gold-plated screw terminals
  • Variable low-pass filter (50-200 Hz, 24 dB/octave)
  • Single side exposure terminals for multi-installation
  • CEA-2006 compliant amplifier
  • Frequency response: 5-200 Hz
  • Dimensions: 13-3/4"L x 2-5/16"H x 9-3/8"D
  • 4-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
  • 1-year Sonic Electronix warranty

Product history:

Kenwood KAC-9106D thumbnail
(newest, current model)
Kenwood KAC-9105D thumbnail
(previous model, replaced by Kenwood KAC-9106D)
Kenwood KAC-9104D thumbnail
(previous model, replaced by Kenwood KAC-9105D)
Kenwood KAC-9103D thumbnail
(previous model, replaced by Kenwood KAC-9104D)
Kenwood KAC-9102D thumbnail
(previous model, replaced by Kenwood KAC-9103D)

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
500 watts x 1 channel
RMS Power @ 2 ohms
900 watts x 1 channel
RMS Power @ 1 ohm
>900 watts x 1 channel
Amplifier Specifications
Series
Performance Series
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
1800 watts
Total RMS Power Output
900 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
0.8%
Speaker Level Inputs
Yes
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
50 - 200 Hz
Signal-to-Noise Ratio
75 dB
Bass Boost
0 - 18 dB
Remote bass/level controller
No
Fuse Rating
30A x 2 
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Item Details


Manufacturer:

Model Number:

KAC-9105D

Weight:

9.00lbs

Internal SKU:

kac9105d

Internal Product ID:

22574

Product and How-to Videos


Customer Ratings & Reviews



5 star
74%
4 star
15%
3 star
8%
2 star
2%
1 star
2%



Durability
4.5
Value
4.8
Features
4.4
Design
4.6
Usability
4.7

Customer Reviews

Sort by:

Loading...

Awesome product

It really hits hard and works perfect. I recommend for subs 700 watts rms or higher

By Jose on February 20, 2014

34

found this helpful.

Kenwood Enthusiast

I have owned this amp for almost a year now and have had no problems with it. I have it pushing 2 Kenwood 12" KFC-3011s at 4ohms and this thing is a BEAST! I have owned a few other amps, but nothing like this one, it has the same power as any other amp in its category at a lower price. I also own a Kenwood KAC-8404 4-channel that is pushing 2 Kenwood 6x9s in the rear and 2 Kenwood 6x8s in the front doors and its pure Sound Quality all the way around. Definitely recommend this amp for anyone looking to build a beginner to intermediate system.

By Diesel on April 4, 2011

34

found this helpful.

amp

worked good i would buy another one have three in my truck

By john on October 1, 2013

33

found this helpful.

This amp is a knock out!

This amp is another one of kenwoods best. I have it powering one 12' alpine type R at 950 watts RMS @ 2ohms. This amp is one of the best i have owned so far (4 years) and I can see my self using it on many more sub builds. I wasnt big into kenwood until I plugged this amp in but man I am a fan now!

By Richter on September 18, 2013

33

found this helpful.

Great Amp

This amp is very powerfull, but at the same time makes clean, clear bass. I am running this with 2 15" kicker comp subwoofers at 4ohms and if tuned properly will pound hard.

By Joe on January 11, 2012

33

found this helpful.

pounds

Sounds great running 2 Kicker CVR's, turned up it will make your head hurt, doesn't drain alot from car electrical system, just wish the control dials were under the removable plate instead of on the side with the connections

Just a note tho, running at 2ohm load this thing gets pretty warm after 45 minutes to an hour, make sure it has ventilation

By Thad on November 23, 2010

31

found this helpful.

power

This sounds as good as it gets I have this amp hooked up with 2 Pioneer 2 ohm dual coil subs that are 3000 watts each and it pumps out the sound just hook them up positive to negitive on each sub and then one sub positive and the other nagitive and then coming out of your amp one positive and the other negitive do not hook them up like there two seperate speakers hook them up in series they are loud as ****

By john on December 10, 2010

28

found this helpful.

Best Amp For The Money

I have this amp running 3 10 inch subs at 275 watts each rms wired to 2 ohms and it hitting very hard at only about 25% turn up on the gain. I have owned this amp since last February and it performs like its still brand new no problems at all.

By Tricky on January 18, 2014

29

found this helpful.

Do not buy

Blew two of these in two months, does not put out rated. power shuts off goes into protect mode all the time

By smitty on July 28, 2013

28

found this helpful.

Great Bang for the Buck

I originally installed this amp in my 06 Civic with 1 Kenwood KFC-W3013PS subwoofer wired at 4 ohms for a 500 watt load. I had also bought a 1.4 cube single sealed sub box from Sonic. And of course a wiring kit – you can’t beat the prices here. This amp has a really cool feature that allows you to feed the signal straight from your other speakers with no need for a remote turn on wire. Perfect for an install like mine where I kept my factory head unit and didn’t have to figure out how to run a remote wire. It senses the signal coming from the speaker wires to turn itself on. Even though this pounded pretty loud, I soon decided to get the most out of the amp and buy another identical sub and a new double sealed box from Sonic. Now wired at a 2 ohm load for the full 900 Watts RMS. I was already running a capacitor but that wasn’t enough (Headlight dimming). Since my starting battery with that car was kind of weak (Honda seems to think a 400 CCA battery is appropriate for Minnesota winters) and I can’t find a more powerful one that fits in the engine compartment without modifying things, I bought 2 Kinetik HC1200 (1200 cranking amp each) batteries from Sonic. I replaced my starting battery with one (Just cut a board that I put on the battery tray for the battery to sit on and strapped it in) and put the other in the trunk with a fuse on both batteries. I also did the big 3. That solved the dimming headlights but if I really crank it on the right song I get some voltage drop so next step is buying a high output alternator. Meanwhile I figured out how to take my rear view mirror off because my windshield bounces with the bass and the mirror vibrates like a mofo. Normally if I listen at volume 30 (Car goes up to 40) I don’t get voltage drop, everything rattles, I can feel my hair move, it tickles my nose, It hurts my ears, and I can even feel it in my throat on some songs. I consider that pretty loud. I recently built a custom ported box for my truck that matches the specs for my sub perfectly and that sounds so much better and is louder than the sealed box I was using so my next step is going to be building a custom ported box for my 12’s in the Civic. That should add some volume. I’m writing this review (Sonic sent an email asking for such) even though I see this amp is out of stock. That’s a shame. Hopefully they will get more because this was an awesome purchase. I would recommend this amp to anyone who is looking to get a good bang for your buck.

By Michael on September 5, 2013

26

found this helpful.

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(38)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(28)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(10)

$399.96

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Related Searches


KAC-9105D small

Item added to your cart.

Price: $199.99

Essential add-ons
Belva BAK42

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
Belva BAK42BK

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
Belva BAK42BL

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
InstallBay AK4ANL

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder

$49.99

$29.99

Add to cart
Stinger SSK4ANL

Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder

$55.00

$32.99

Add to cart
Stinger SS1200XS

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$119.00

$52.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$18.99

$12.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon