Garage
Shop

MB Quart ONX4.60

480W RMS, ONYX Series 4-Channel Amplifier (ONX-4.60)

MB Quart
Shop all MB Quart
Product videos
highlight-star-icon

ONYX Series 4-Channel Class A/B Car Amplifier • 120W x 4 Chan @ 2 Ohm • 60W x 4 Chan @ 4 Ohm • Unbalanced RCA Input Jack • Preamp RCA Outputs • 4-Way System Protection Circuitry • Piano Black Gloss Finish

Learn more about the onx460

We apologize

This item has been discontinued

Product Highlights


ONYX Series 4-Channel Class A/B Car Amplifier • 120W x 4 Chan @ 2 Ohm • 60W x 4 Chan @ 4 Ohm • Unbalanced RCA Input Jack • Preamp RCA Outputs • 4-Way System Protection Circuitry • Piano Black Gloss Finish

Description


MB Quart brand icon

Authorized dealer

Success is a Measurement of Quality and Power

The success of any car audio amplifier depends on system quality and construction, ease of installation and configuration, and sound enhancing features. MB Quart engineers built the all new Onyx series amplifiers from the ground up to be an affordable amplifier with the audiophile and performance enthusiast in mind. This series is composed of value-packed class A/B amplifiers that boast affordability without sacrifice to power or quality. All Onyx Amplifiers come clothed in a beautiful new age piano black finish which accents interiors and brings a whole new level of sophistication to swallow. To match, the line of Onyx Speakers shows off the same piano black finish applied to their polypropylene cone woofers. It’s a perfect match every time.

Speaking of features, Onyx amplifiers bring the full tuning spectrum to your fingertips with variable high-pass, low-pass and subsonic filters built-in. To increase endurance, MB Quart designed Onyx amplifiers with military grade printed circuit boards and built-in system diagnostics that keep these amps running strong. High speed MOSFET output devices are used in the power supply to give you the best watts-per-dollar ratio. It’s not hard to see how success has been written all over these amplifiers, though with a piano finish that looks that good, we know you will be staring.

  • ONYX Series 4-Channel Class A/B Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 60 watts x 4 chan.
    • 2 ohms: 120 watts x 4 chan.
    • Bridged, 4 ohms: 240 watts x 2 chan.
  • CEA-2006 compliant amplifier
  • PWM (Pulse Width Modulated) MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +12 dB bass boost at 45 Hz
  • 4/3/2 channel operation
  • Unbalanced RCA input jack
  • Preamp RCA outputs to daisy chain multiple amps
  • 4-Way System Protection circuitry (DC, thermal, overload, and speaker short protection)
  • Piano black gloss finish with illuminated logo
  • Heavy duty aluminum alloy convection heatsink for superb heat dissipation
  • Silver-plated RCA level inputs
  • Silver-plated screw terminals
  • Input sensitivity:
    • Low level: 200mV-6V
  • Variable high-pass filter (60-13,000 Hz, 24 dB/octave)
  • Variable low-pass filter (30-250 Hz, 24 dB/octave)
  • Damping factor: >180
  • Frequency response: 10-45,000 Hz
  • Dimensions: 13-11/16"L x 9"W x 2-1/2"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
60 watts x 4 channel
RMS Power @ 2 ohms
120 watts x 4 channel
Bridged RMS Power
240 watts x 2 channel
Amplifier Specifications
Amplifier Class
A/B
Number of Channels
4-Channel
Total RMS Power Output
480 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
0.05%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
60 - 13,000 Hz
Low-Pass Crossover Frequency
30 - 250 Hz
Signal-to-Noise Ratio
>92 dB
Channel Separation
>80 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
No
Fuse Rating
25A x 2 
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

ONX4.60

Weight:

9.00lbs

Internal SKU:

onx460

Internal Product ID:

23877

Product and How-to Videos


Customer Ratings & Reviews



5 star
80%
4 star
10%
3 star
10%
2 star
0%
1 star
0%



Durability
4.6
Value
4.8
Features
4.8
Design
4.5
Usability
4.6

Customer Reviews

Sort by:

Loading...

good buyy

I have this amp running my Rockford fosgate power series component speakers. And they sound loud and clear! I have to turn the gain only half way up! Before the sound is piercing!

By LINK on September 11, 2011

8

found this helpful.

Works great for me

I really like this amp. After having bad luck with a couple of other brands, I went with this one. Loud and clear. No noise. The amp looks great, and includes a nice mb quart sticker, and a small cleaning cloth. The piano black is prone to fingerprints.

The only con I can give is that if I push it hard for long enough, I get a faint burning electronics smell. I have never backed off the volume when I smell it, and I have never had any smoke associated with the smell. It could be some extra dielectric grease burning off. It has never gone into protection.

Overall, I am very satisfied. It has decent power for the price.

By Oshea on September 26, 2012

7

found this helpful.

Totally Awesome

I was really wanting to get the MB Quart REF 4.80 to drive my mids and highs, as I already have the MB Quart REF 1.800 driving my subs. Unfortunately, that amp has been discontinued. In my search, I ended up calling MB Quart directly to try and get this amp, as it was no longer offered for sale by Sonic. In speaking with them, they told me try one of their Authorized Online Retailers, and Sonic was first on their list. I mentioned to the CSR that I already tried Sonic and it was unavailable. I then called MB Quart up again, and they reccomended the ONYX 4.60 to meet my needs. My main concern was having a quality amplifier which was also CEA 2006 compliant. Sonic had this amplifier in stock, and with their Low Price garuantee, I was able to pick this great amp up for a great price. How great is that! I currently have this amplifier driving 2 sets of the MB Quart ONYX OTK-30 Widesphere Tweeters and 2 sets of the Rockford Fostgate Power Series T-1682 6 x 8 coaxials, all of which I picked up from Sonic at a great price also. Totally Awesome are the only words that I can come up with for this amp's perfomance on this set up, it really made my mids and highs come to life. It also relieved stress off my head unit's pre-amp to deliver a more full and true signal to my subs. The sound comparison of head unit powered vs. amped with the ONYX 4.60 is totally awesome. It is like the difference between night and day. Additionally, I added Dynamat to the speaker install and everything is controlled by a Pioneer AVH-P3300BT head unit to deliver 120 clean, clear, crisp RMS watts to these components. There is nothing negative regarding this amps perfomance, but MB Quart could have left the red chicklet logo unilluminated, as this does throw off the beautiful gloss black appearance of the amp. That doesn't really matter though, as this amp is built to perform, appeasing the ears, not the eyes. For my subs, I have 2 10" Alpine SWS-1023's driven by the MB Quart REF 1.800. Everyone is amazed when they look inside my F-250 Crew Cab, as they are expecting to see a whole gamut of speakers and amps, but they are surprised to see that everything looks stock with the exception of the head unit! When everyone asks "How did you do it?" I just say Sonic! and I'm not talking about the drive-in either, LOL. Thanks SonicElectronix.com!

By Mark on April 2, 2012

6

found this helpful.

Not Quite right for me.

The amp fit the right price, good power 120watts at 2ohms more than enough for my infinity reference components (90 watts rms) Seemed to have good build Quaility but i recieved an unclean signal while using the amp. no alternator whine or ground loop noise just an overall muddy sound. i checked ground and rcas which where both good. i just couldn't get it to sound crisp and clear. Components sounded better on the 20rms from the headunit alone. Maybe the ticket for some but not for me. Have a Polk Pa660 now and its crystal clear with less power!

By Randum on February 28, 2013

5

found this helpful.

Great

After I had this thing installed properly it makes my speakers that much better! I have it powering 4 infinity kappa 6x9 speakers and I would highly recommend this amp!

By KC on February 21, 2013

7

found this helpful.

Great

Used this amp for a sound upgrade in my boat, drives pair of 6.5 Polk components and one Polk 10" sub. Sound is loud and clear.

By tomas on February 21, 2011

6

found this helpful.

Perfect Amp!

I just finished installing this amp to power my MB Quart ONX216 components and RF 12" Sub. All I can say is that it gives just the right amount of juice my speakers need. I was worried at first that it won't be enough to power everything since I had friends who had 4-channel Hifonics amps that would overheat and shut off after playing hard but this one I have no issues at all.

By Michael on September 10, 2012

5

found this helpful.

Absolutly amazing product

I was very skeptical about this amp because MB Quart used to be a great company until maxxsonics got ahold of it. All of mb quarts products are still good as long as you get a good batch. Anyways, this amp is absolutely amazing! It sounds beautiful powering my 4 Rockford Fosgate p152 coaxials in my jeep cheeokee Xj. It powers them perfectly and has rich mids, crisp highs and clean clear mid bass. Amazing bang for your buck! And goes beautifully with my RE Audio SEX10d4 and MB Quart ONX1.1000d. Looks great but the light just kills the nice glossy black look. These amps have a lot of setting to tune to your personal preference. Overall great product!

By Jake on July 14, 2011

5

found this helpful.

Another Great MB Quart product!

I have owned several MB Quart products including this MB Quart ONX4.60 amp. I have the front 2 channels running my mids & highs and the rear channel bridged mono running a 15" Kicker Comp. Sub. Sounds Great, Great Product & Great Price!!!!

By steve on July 17, 2012

5

found this helpful.

After I bought this, every amp I've bought has been an MB Quart

MB quart has done a great job with the Onyx line, and this amp is no exception, even though its not CEA compliant. The ratings are true, and from hooking it up to a friends speakers, i'm pretty sure it can put out 70+ if properly tuned on a good day.

My only gripes are that the angled terminals are kind of a pain to use once you mount the amp, and the 4AWG terminals are 4AWG, exactly, there is no extra room for wire in there, and the light blows the classy piano black scheme

By Doug on March 15, 2011

4

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX VAD10004

• 150 watts x 4 channel @ 4 ohms
• 250 watts x 4 channel @ 2 ohms
• Bridged: 500 watts x 2 channel @ 4 ohms
• Total RMS Power: 1000 watts
• CEA-2006 Compliant
• Class D 2 ohms Stable 4-Channel-Channel Amplifier

(14)

$279.99

JL Audio XD400/4v2

• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier

(9)

$349.99

JL Audio JD400/4

• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier

(14)

$279.99

Taramps DS 1200X4

• 192 watts x 4 channel @ 4 ohms
• 300 watts x 4 channel @ 2 ohms
• Bridged: 600 watts x 2 channel @ 4 ohms
• Total RMS Power: 1200 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier

(1)

$204.99

NVX VADM4

• 400 Watt True RMS Output!
• Marine Certified 4-Channel Micro Class D Amplifier
• 75W x 4-Chan. @ 4 ohms
• 100W x 4-Chan. @ 2 ohms
• 3-Way System Protection
• 4/2 Channel Operation
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint!

(31)

$189.99

Related Searches


ONX4.60 small

Item added to your cart.

Price: $79.99

Essential add-ons
Belva BAK44BL

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$79.99

$39.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
NVX XMICROLOC4

Add a 4-channel amplifier without replacing your factory radio

$31.24

$24.99

Add to cart
NVX XFLOC4

Add a 4-channel amplifier without replacing your factory radio

$23.74

$18.99

Add to cart
NVX XIX45 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

$44.99

$20.99

Add to cart
NVX V-Series RCA Interconnect Cable

19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

$32.99

$15.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon