VIBE Audio SLR10

10" Slick Series Subwoofer Loaded in a Slick SLR Sealed Enclosure


We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Slick, Tight, and Punchy Bass

Adding deep, punchy bass to your car just got a lot easier. The Slick loaded enclosures from Vibe offer excellent bass response without the necessity of a large, custom-built enclosure. Uniquely styled and shaped, the Slick SLR enclosure produces tight and punchy bass. The specific box is designed to maximize the response of the loaded driver. A N-Wedge enclosure dissipated the rear wave of the subwoofer to further enhance the musical accuracy of the subwoofer. Included in the package is Vibe's Flat13 speaker wire. The 13 AWG speaker wire is flat for easier installations and ensures the woofer receives optimal power from the amplifier. Multiple enclosures can be purchased and bolted together to create a twin enclosure for twice the bass.

Subwoofer Features:
  • 10" Single 4 ohm Slick Series Subwoofer
  • Subwoofer pre-loaded in a sealed enclosure
  • Power Handling:
    • Peak: 1000 watts
    • RMS: 350 watts
    • Minimum: 175 watts
  • Impedance: Single 4 ohm
  • One piece polypropylene cone increases the depth and clarity of bass
  • Inverted rubber surround offers extended low frequency response
  • Seamless surround looks great and provides greater strength
  • Rubber mounting gasket ensures a perfect seal when mounting the speaker
  • Dual spider assists in the control and stability of the cone with high power handling
  • Alloy torsion basket provides rigidity and support for motor and moving parts
  • Removable magnet boot cover provides excellent magnet protection
  • Spring terminals allows ease of installation for heavy gauge speaker wire
  • 2" Aluminum 2-layer voice coil
  • Single 50 oz. ferrite magnet for high power handling
  • Large Y25 magnet
  • Compatible with free-air applications
  • Mounting depth: 5"
  • Frequency response: 20-1,700 Hz
  • Sensitivity: 88 dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
General Enclosure Features:
  • 10" Sealed Loaded Enclosure
  • Box designed specifically for the loaded Slick subwoofer
  • N-Wedge enclosure shape enhances bass response by dissipating the rear wave of the subwoofer
  • Twin spring loaded TP2 terminal post for fast and secure connection to speaker wire
  • Sealed acoustic suspension enclosure offers high power handling and improved transient response
  • Modular system allows two enclosures to be combined as a twin enclsoure
  • Package includes 13 AWG 100% OFC copper flat speaker wire
  • Dimensions: 15-3/4"D x 14-1/4"W x 12-1/2"H

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
350 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1000 watts
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
88 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 1,700 Hz
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Hatchback Style, Angled Back
The height of the item, measured from top to bottom, in inches.
The width of the item from left to right (side-to-side) measured in inches.
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Spring posts (banana clip ready)
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.

Specials with this Item

Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating


columbis, sc

good for beginners

February 16, 2011

This sub box is ok for the price, sounds better than you would think.

4 of 5 found this helpful

Was this review helpful to you?


santa clarita

vibe audio slr10

July 11, 2011

Great little box with full sound capabilities, very good choise if you dont have a lot of space. It fits in my explorer with the third row seat up perfectly as if it was made specially for it. The 10 inch fills in very good well. Good sub, with enough sound for what ever you drive, Quality all around. The best of the sound is heard in your car, if you want supply your neighbors with noise, this is not for you.

3 of 4 found this helpful

Was this review helpful to you?


Lake Havasu City, AZ

Great sounding sub woofer...

June 11, 2012

I feel this subwoofer was a great buy. I would recommend it to anyone that wants a quality sub for a great price.

2 of 3 found this helpful

Was this review helpful to you?


Lander, WY

Not usable.

July 20, 2012

It showed up at my door in an undamaged box. I picked it up and put it under my arm and felt a heavy thud. Tilted it the other way, another thud. The speaker magnet came off the speaker. Waiting to see if Sonic Electronix will stand behind their products. The fact that this happened is pretty bad though. I've had solo-baric's go flying out of a car at 90 miles an hour and sustain no damage other than the box getting a few beat up corners. True story.

1 of 2 found this helpful

Was this review helpful to you?


Bronx, NY

Quality at a bargain

January 19, 2012

Replaced a Dual bandpass unit which made noise and suffered excessive vibration. This Vibe unit is tight, crisp, accurate and quality sounding. Excellent for jazz and quality music. You won't be heard coming down the block but inside your vehicle it's great even with the windows open. If you're looking for a noise making ghetto blaster this unit is not for you. Excellent bang for your buck. I purchased a separate metal grille to protect the woofer for around $10-15.

1 of 2 found this helpful

Was this review helpful to you?


Bronx, NY (Meng, lol)

quality sealed in a box

July 27, 2011

Just received my Vibe sub and installed it in about 5 mins, my vehicle was already pre-wired. My, my, my how sweet this sub sounds. Running it through a Crunch Ground Pounder GPV700.2 700 Maxx Watt Power A/B Class Two Channel Amplifier (Silver) and the quality of bass and sound is excellent. No hissing, feedback, popping, or muddied bass. The sound is sharp, tight, and very accurate, no overlapping bass notes and ridiculously excessive vibration (resonance) here. Had a bandpass before this one; that will never happen again.
This unit has more than ample clean and clear loudness. If you're trying to be seen, heard, annoy your neighbors, or attract hood rats, go with your typical LOUD noise maker :-)
I'm very pleased with this unit and would definitely recommend it. Excellent bang for the buck. I purchased it for cheap, free delivery; not bad for an imported item, by the way Vibe is JL for British market. By the way the workmanship and quality of material is evident as soon as you open the box it comes in.

1 of 2 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Your Price $59.99

NVX Sound Dampening Rubber Roller (SDRLR1)

Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

Your Price $14.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary


Model Number






Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: VIBE Audio SLR10

Item Added to Cart

VIBE Audio SLR10

10" Slick Series Subwoofer Loaded in a Slick SLR Sealed Enclosure


Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection

NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)


Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More



Don't see the accessory you're looking for?
View all available accessories for the VIBE Audio SLR10.