Garage
Shop

VIBE Audio Black Air 10 (BA10)

10" Dual 2 ohm Black Air Series Car Subwoofer

VIBE
Shop all VIBE
Product videos
highlight-star-icon

10" Black Air Series Subwoofer • Dual 2 ohm • 1300 Watts Max • 450 Watts RMS • Polyglass Cone • Multi-Roll Rubber Surround • Dual Spider Assembly • FEMM Motor and FEA Cone • Screw Input Terminals

Learn more about the ba10

We apologize

This item has been discontinued

Product Highlights


10" Black Air Series Subwoofer • Dual 2 ohm • 1300 Watts Max • 450 Watts RMS • Polyglass Cone • Multi-Roll Rubber Surround • Dual Spider Assembly • FEMM Motor and FEA Cone • Screw Input Terminals

Description


VIBE brand icon

Authorized dealer

Bringing style, performance, and value across the Atlantic Ocean, Vibe Audio introduced their Black Air car subwoofers. Along the line-up of Vibe subwoofers, the Black Air series falls right in the middle as a perfect combination of value and performance. The solid alloy torsion basket that is found on many of the Vibe Audio is also found on this subwoofer. This adds strength and support for all the moving parts of the woofer’s motor structure. Among other components, the double spider construction and the single Y35 ferrite magnet help keep the woofer motion linear and the bass smooth. Made from stiff poly-glass, the bright yellow cone not only looks great, but creates bass notes with virtually zero distortion. Connection is made tight and secure with the screw terminals that hold the speaker wire firmly in place. For those looking for clean, affordable bass, the VIBE Audio Black Air 10 is a brilliant solution.
  • 10" Dual 2 ohm Black Air Series Subwoofer
  • Power Handling:
    • Peak: 1300 watts
    • RMS: 450 watts
    • Minimum: 225 watts
  • Impedance: Dual 2 ohm
  • Polyglass cone made from a combination of polypropylene and fiberglass
  • Multi-roll rubber surround achieves better linearity throughout the subwoofers excursion range
  • Dual Voice Coils (DVC) offers multiple impedance options
  • Unique cone support is specially designed for rigidity without excessive weight
  • Dual spider assists with the control and stability of the cone, as well as higher power handling
  • FEMM Motor provides low distortion and linear flux saturation
  • FEA Cone is designed using Finite Element Analysis (FEA) to ensure maximum rigidity to weight
  • Alloy torsion basket provides rigidity and support for motor and moving parts
  • Removable rubber boot for greater magnet protection
  • Aluminum alloy gasket is made from high quality machined aluminum
  • Screw input terminals allow for heavier gauge speaker wire to be connected to the voice coil
  • 2" Aluminum 4-layer voice coil
  • Single 50 oz. ferrite magnet
  • Mounting depth: 6"
  • Mounting diameter: 9-1/4"
  • Frequency response: 30-1,700 Hz
  • Sensitivity: 88 dB
  • Also found as: ba-10
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Subwoofer Wiring Guide


Wiring Guide to Wire 1 VIBE Audio Black Air 10 (BA10) Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

Wiring Guide to Wire 2 VIBE Audio Black Air 10 (BA10) Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

Wiring Guide to Wire 3 VIBE Audio Black Air 10 (BA10) Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

Wiring Guide to Wire 4 VIBE Audio Black Air 10 (BA10) Subwoofers

2 Channel Amp

4 Channel Amp

Specifications & Details


Subwoofer Specifications
Series
Black Air Series
Subwoofer Size
10"
Peak Power Handling
1300 watts
RMS Power Handling
450 watts
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
2 ohms
Frequency Response
30 - 1,700 Hz
Sensitivity
88 dB
Xmax (millimeters)
15 mm
Subwoofer Design
Round / Circle
Main Cone Color
Yellow
Woofer Composition
Polyglass
Woofer Surround
Rubber
Subwoofer Grille
No
Re-Cone Kit Available
No
Recommended Enclosure Specifications
Recommended Enclosure Type
Ported / Vented
Sealed
Minimum Sealed Box Volume
1.0 cubic feet
Maximum Sealed Box Volume
1.5 cubic feet
Minimum Ported Box Volume
1.0 cubic feet
Maximum Ported Box Volume
1.0 cubic feet
Top-Mount Depth (Mounting Depth)
6"
Cutout Diameter
9-1/4"
Shallow Mount Installation
No
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

BA10

Weight:

12.50lbs

Internal SKU:

ba10

Internal Product ID:

28068

Product and How-to Videos


Customer Ratings & Reviews



5 star
33%
4 star
50%
3 star
0%
2 star
17%
1 star
0%



Durability
4.2
Value
3.5
Features
3.9
Design
4.4
Usability
4.7

Customer Reviews

Sort by:

Loading...

VIBE Audio Black Air 10 - an audio masterpeice

I have been an audiophile for about 15 years now, and I cannot come up with one negative thing to say about VIBE. Build quality is superb, appearance of all their products are simply beautiful, cost is decent, and sound of all their products are just amazing. Vibe is high-end quality for what you pay, and they produce the best looking audio components out there in my opinion. The Black Air 10 is a masterpiece.

By Patrick on August 9, 2011

19

found this helpful.

Great sub.

I have this sub in a .75 cubic feet sealed box, a little less than recommended, and I plan to polyfill soon. I have a Pioneer premier 2 channel delivering 600 watts rms to it currently, low passed up high at 500hz. It sounds AWESOME! Very tight and precise bass, exactly how I like it. I bet if it were in a ported or bandpass box it would be loud as all hell, but it sounds very good in my sealed set up. It is very sturdy and the terminals are nice as well. It is unfortunate that this product has a bad review that states no reason why it was rated poorly. I definitely recommend it. My test tracks were from Adele, Deltron 3030, Pinback, Ray LaMontagne and Atmosphere. It handles all genres very well.

By Evan on December 28, 2011

12

found this helpful.

VIBE Audio Black Air 10 (BA10)

I had never tried any system from vibe, But after hearing about the performance from colleague i had to try it. If you are looking for deep bass, in a small compartment this is the sub to get. I would recommend it to installer and for a very reasonable price.

By Bafucafu on February 13, 2012

10

found this helpful.

Great Value

I just bought one of these on sale and it is hooked to a Hifonic HFi 100.2 amp in a vented enclosure in the back of my wrangler. It really does a great job for a kit under 200$ brand new...

By Xavier on March 30, 2011

9

found this helpful.

good sub

Nice clean bass it hits the low end bass I wish I had a vented box that will hit alot harder I really recommend these

By powder p on December 8, 2010

9

found this helpful.

true rms

i have 4 of these in sealed boxx 1 cubic foot each 425 watts rms it can handle with no problem but sound is not all that i wish i had brought kicker in stead oh yeah good test song rick ross mc hammer but dont crank it until u break woofer in good or u may blow it but it will let u know if u have a good woofer or not so far kicker has been the only woofer to reproduce the bass notes right im sure there may be others that can do it but u will not have to wonder if u choose kicker and for power hifonic u get a lot for little

By fdomino on January 5, 2011

8

found this helpful.

Add-ons


Similar Products

Best selling similar products

Kicker 47KBRW10 ReFLEX™

• 10" ReFLEX™ Passive Radiator
• Rubber covered plastic Cone
• Rubber Surround

$59.99

NVX VCW104 Version 3 (VCW104v3)

• RMS Power Range: 650-800 watts
• Pressed Paper Cone Carbon Fiber Top
• Dual 4-ohm Voice Coil
• High Excursion Foam Surround
• Dual Progressive Spiders with Integrated Tinsel Leads

(62)

$109.99

JL Audio 10W0v3-4

• RMS Power: 300 watts
• Impedance: Single 4 ohms
• Polypropylene Cone
• Foam Surround
• Mount depth: 4.90"
• Sensitivity: 84.07 dB

(53)

$139.99

NVX VSW104 Version 2 (VSW104v2)

• 10" VS-Series Subwoofer
• Dual 4-ohm Voice Coil
• RMS Range: 500 Watts
• Non-Pressed Paper With Woven Carbon Fiber Top
• High Excursion Foam Surround
• Stamped Steel Basket
• Single Nomex Spider

(27)

$74.99

Kicker CompVR CVR104 (43CVR104)

• Peak Power: 700 watts
• RMS Power: 350 watts
• Impedance: Dual 4 ohms
• Sensitivity: 83.6 dB
• SoloKon Polypropylene Cone
• Santoprene Rubber Surround
• Mount depth: 5-1/2"

(14)

$89.96

Related Searches


BA10 small

Item added to your cart.

Price: $39.99

Essential add-ons
Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

$6.99

Add to cart
NVX SDTK20

20 Square Feet of Sound Damping Material

$89.99

$59.99

Add to cart
Dynamat Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$236.95

$149.95

Add to cart
NVX SDRLR1 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$9.99

$7.99

Add to cart
NVX SDRLR2 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$11.24

$8.99

Add to cart
Belva BAMMD1

Six Function Digital Multimeter

$14.99

$6.99

Add to cart
Belva BAMMD3

Nine Function Digital Multimeter

$29.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon