Ashly NE800PE

800W Peak, 2-Channel Class D Power Amplifier w/ Protea DSP

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

The New NE-Series (NE = Network Enabled)

Ashly's two-channel NE amplifiers provide a whole new level of punch and control for the most basic and the most advanced audio systems. Ashly's Network Enabled (NE) Series amplifiers are simple to use and offer full setup, control and monitoring utilizing standard 10/100 Ethernet protocol and Protea NE Software. No outboard control modules are necessary. NE amplifiers are also offered two ways; standard and "PE" (Protea Enabled) with Ashly's world-renowned Protea DSP.

The NE800 offers 400W per channel at 4 ohms. The input connections are 1/4" XLR Neutrik combo connectors and 6-pin Euroblock. Male XLR and Euroblock connectors are included for looping to additional amplifiers. The output connectors are locking Neutrik Speakon (NL-4) and Euroblock.

The Digital Signal Processing (DSP) is handled by 2 SHARC 32-bit/96kHz processors. The extensive DSP options include High, Low and All-Pass filters (HPF/LPF/APF) with up to 48dB/octave slopes, delay, gating, ducking, compression/limiting, auto-leveling, graphic, parametric, notch and shelving equalization, gain adjustment and signal generators for calibration (incl. sine wave, white and pink noise). User presets can store and recover all global parameters of an amplifier's control surface and DSP sections. The Matrix Mixer enables any input to control any or all of the amplifier outputs through user customizable routing.

Each amplifier also offers DC voltage-controlled attenuators, which makes it very easy to control amp volume from remote locations. The NE-Series amplifiers also boast features such as the aforementioned Preset Recall, Remote Power Standby and data I/O ports for connecting accessories such as the WR-5 to control user selected parameters. With the NE-Series amplifiers, you get the dependability, ultra-high sonic quality and rugged construction that consumers expect from the Ashly name.

Product Features
  • 800W Peak, 2-Channel Class D Power Amplifier
  • RMS Power Rating:
    • 8 ohms: 200 watts x 2 chan.
    • 4 ohms: 400 watts x 2 chan.
    • Bridged, 8 ohms: 800 watts x 1 chan.
  • Integrated Protea DSP allows graphic and/or parametric EQ, high and low pass filters, time delay, etc.
  • Rackmount design allows you to install the amplifier in any standard equipment rack
  • 10/100 Ethernet jack enables control and monitoring of the amplifier's functions
  • DC voltage control
  • Remote power standby
  • Stepped and calibrated attenuator knob for each channel
  • Input slot available for optional CobraNet CNM-2 card or an AES/EBU input
  • Built-In protection circuitry protects against overloads and overheating
  • Power, standby, protect, network, temperature, current, and power switch disable status LED indicators
  • 4-Level signal and clip LEDs
  • Cooling: Temperature sensitive variable-speed fan, front-in, rear-out flow
  • Input Sensitivity: 26 or 32 dB or 1.4V
  • Input Impedance: 20k ohms, balanced
  • Frequency Response: 20-20,000 Hz ± 1dB
  • Damping factor: >250 (8 ohm load, <1KHz)
  • Distortion (SMPTE, typical): <0.5% (8 ohm load, 10dB below rated power)
  • Distortion (THD+N, typical): <0.5% (8 ohm load, 10dB below rated power)
  • Signal-to-Noise Ratio: >107 dB
  • THD (Total Harmonic Distortion): <0.5%
  • Dimensions: 15-1/2"D x 19"W x 3-1/2"H
  • 1-year Manufacturer's warranty
Inputs & Outputs
  • 2 x XLR inputs
  • 2 x Euroblock inputs
  • 1 x AC Power input
  • 1 x Input expansion slot
  • 2 x XLR Aux outputs
  • 1 x Euroblock Aux output
  • 2 x Speakon outputs
  • 1 x Euroblock speaker output
  • 1 x 10/100 Ethernet port
  • 1 x Remote Euroblock connector

Power Specifications

Number of Channels
This is the number of channels that the professional amplifier is designed to power.
2 Channels
Continuous Power @ 8 ohm
This is the continuous (RMS) power output of the amplifier at an 8 ohm impedance.
200 watts x 2 channels
Continuous Power @ 4 ohm
This is the continuous (RMS) power output of the amplifier at an 4 ohm impedance.
400 watts x 2 channels
Continuous Power @ 8 ohm (Bridged)
This is the continuous (RMS) power output of the amplifier at a bridged 8 ohm impedance.
800 watts x 1 channels
Total Continuous Power
This is the total continuous power rating (RMS) that the amplifier is able to output.
800 watts

Amplifier Specifications

Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
>98 dB
Frequency Response
The range of frequencies the amplifier will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 20000 Hz
Input Sensitivity
This is the input sensitivity of the amplifier.
1.4 volts
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
Cooling Options
These are the different cooling systems used in the amplifier to keep it cool.
Cooling Fan
These are the type of input connections that the amplifier has.
These are the types of output connections that the amplifier has.

Physical Specifications

The height of the item, measured from top to bottom, in inches.
The width of the item from left to right (side-to-side) measured in inches.
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Weight (Pounds)
This is the weight of the item in pounds (lbs).
35 lbs
Rackmount Spaces
This is the total number of spaces that the preamplifier will occupy when mounted on a rack.

Specials with this Item

Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary


Model Number




Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Ashly NE800PE

Item Added to Cart

Ashly NE800PE

800W Peak, 2-Channel Class D Power Amplifier w/ Protea DSP


Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection