JBL VP7210/95DP

1750W 10" Two-Way High Powered Full Range Loudspeaker with Built-In JBL DrivePack Technology

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

A Differential Drive For Freedom

The VP7210/95DP is a powered 10" 2-way integrated loudspeaker system featuring 1750 watts of peak output power, and onboard digital signal processing.

Designed in cooperation with Crown International, the JBL DrivePack® DPC-2 amplifier module features Crown’s Class D digital power amplification circuitry.

DBT (Dual-Bridged Technology™) directly links discrete amplifier channel outputs to each voice-coil in the Differential Drive loudspeaker. Electrical power transfer to the transducer is optimized for maximum system performance.

VP7210/95DP transducers are JBL’s 2260FF 10" diameter Differential Drive woofer and the JBL 2452H-SL compression driver. The high frequency driver is coupled to a JBL PT-D95HF Progressive Transition (PT) Waveguide for excellent 90° x 50° pattern control, smooth frequency response, and low distortion. Easily rotated for horizontal or vertical system orientation.

The VP7210/95DP is equipped with an integrated 35 mm stand mount.

General Features:
  • Compact Powered bi-amplified full-range loudspeaker with JBL DrivePack® technology for portable or installed use
  • Optimized for both portable/rental or permanent-venue use
  • 1750 watts peak output power, 875 watts continuous
  • 10-inch Differential Drive® low-frequency driver for extended lowfrequency output
  • Robust powder-coated die cast aluminum handles, designed for strength and comfort
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
System Specifications:
  • DPC1 Internal Amplification Output (at nominal load): 1750 Watts Peak, 875 Watts Continuous
  • DPC1 Output: 750 LF / 125 HF Watts (Continuous IEC shaped pink noise into rated load impedance)
  • DPC1 Output Section: LF: Dual Bridge Technology, Class D HF: Bridged Class D
  • Audio Input Connector: XLR with loop-through
  • User Controls: 80 Hz Subwoofer High Pass Filter. Enable / Disable 0-16 dB input Attenuator w/ 32 precision 0.5 dB steps
  • Signal Processing: DSP based, resident in Input Module
  • System Management: DSP based limiters for mechanical and thermal protection
  • AC Power Operating Range: 90-132 VAC / 216-264 VAC, 50/60 Hz
  • AC Line Voltage: 50/60 Hz, Auto-Detect; 120V/240V (-15%, +10%)
  • AC Input Connector: Neutrik PowerCon (NAC 3MPA)
  • AC Look-thru: Neutrik PowerCon (NAC 3MPB)
  • AC Current Requirement: 6A/system @ 120V, 3A/system @ 240V
Acoustic And Electrical Specifications:
  • Frequency Response: 80 Hz - 20 kHz (±3 dB)
  • Frequency Range: 50 Hz – 20 kHz (–10 dB)
  • Maximum Peak Output: 132 dB SPL 1m
  • Coverage Pattern: 90º x 50° rotatable waveguide
  • Directivity Factor (Q): 10
  • Directivity Index (DL): 10 dB
Transducer Section:
  • Cabinet: Not for Sale
  • Grille: 362983-001
  • Low Frequency Driver: JBL 2261FF, 254mm (10 in) dia., 76mm (3 in) Dual Coil neodymium Differential Drive, Direct Cooled
  • Bandpass Nominal Impedance: 2 x 2 ohms
  • High Frequency Driver: JBL 2452H-SL, 100mm (4 in) titanium damped diaphragm, 1.5 in exit
  • Bandpass Nominal Impedance: 8 ohms
Aural Sweep Test Specifications:
  • A. System Aural Sweep Test: 100mV Input,, 20 Hz to 20 kHz
  • B. L.F. Aural Sweep Test: 4.0V Input, 20 Hz to 1.2 kHz
  • C. H.F. Aural Sweep Test: 2.5V Input, 300 Hz to 20 kHz
Physical Specifications:
  • Enclosure Dimensions: 521 x 293 x 303 mm (Height x Width x Depth) 20.5 x 11.5 x 11.9 in
  • Net Weight: 18.4 kg (40.5 lb)

Loudspeaker Specifications

This is the type of professional loudspeaker. Active loudspeakers have a built-in amplifier to power the speakers. Passive loudspeakers require an external amplifier to be properly powered.
High Frequency Driver Size
This is the size of the high frequency driver. Common sizes include 1", 1-1/2" and 2".
Low Frequency Driver Size
This is the size of the low frequency driver. Common sizes include 10", 12", and 15".
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
50 - 20,000 Hz
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
132 dB
Maximum Sound Pressure Level SPL
This is the maximum Sound Pressure Level (SPL) of the professional loudspeaker. The higher the SPL rating, the louder the monitors are able to go.
This is the horizontal and vertical audio dispersion of the professional loudspeaker. The dispersion is measured in degrees.

Active Power Specifications

Peak Power Rating
This is the peak power output that the active loudspeakers is rated at.
Continuous Power Rating
This is the continuous power output that the active loudspeakers is rated at.
Amplifier Class
This is the class of amplifier inside the active loudspeaker.
Amplifier Controls
These are the different types of controls, adjustments, and dials that are on the active loudspeaker.
Built-in Equalizer
If the active loudspeaker has an internal equalizer it will be identified here.

Passive Power Specifications

Peak Power Handling
This is the maximum amount of power (measured in watts) that the speaker is designed to receive.
Program Power Handling
This is the amount of program power (measured in watts) that the speaker is designed to receive.
Continuous Power Handling
This is the amount of power (measured in watts) that the speaker is designed to receive continuously.
Nominal Impedance
This is the nominal input impedance of the passive loudspeaker.

Physical Features

These are the types of input connections that connect to the professional loudspeaker.
These are the types of output connections that connect to the professional loudspeaker.
Enclosure Material
This is the material that the speaker's enclosure is made out of.
Carrying Handles
Carrying handles are found on the enclosure and they make transporting the speaker easier.
Speaker Mounts
Speaker mounts enable the loudspeaker to be mounted to a stand or tripod.
The height of the item, measured from top to bottom, in inches.
The width of the item from left to right (side-to-side) measured in inches.
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Weight (Pounds)
This is the weight of the item in pounds (lbs).

Specials with this Item

Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Searches Related to the JBL VP7210/95DP

Product Summary


Model Number




Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JBL VP7210/95DP

Item Added to Cart

JBL VP7210/95DP

1750W 10" Two-Way High Powered Full Range Loudspeaker with Built-In JBL DrivePack Technology


Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection