JBL AM4200/64

500W Mid-High Frequency Loudspeaker & Rotatable Horn with Cone Midrange Compression Driver

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Well Controlled

AM4200/64 is a medium power midhigh frequency loudspeaker system comprised of one 150 mm (6 in) CMCD Cone Midrange Compression Driver and one 38 mm (1.5 in) exit/38 mm (1.5 in) voice-coil HF compression driver. The multi-band PT Progressive Transition mid-high frequency waveguide provides well-controlled 60° by 40° coverage and is rotatable for cabinet positioning in either horizontal or vertical orientation. High-slope crossovers minimize band overlap and well-controlled off-axis response enhances arrayability

The cabinet is fitted with M10 threaded suspension points. Pre-engineered array bracketry is available.

AM4200/64 is part of JBL’s AE Application Engineered Series, a versatile family of loudspeakers for a wide variety of fixed installation applications.

General Features:
  • Mid-High Frequency Loudspeaker And Rotatable Horn
  • 60° x 40° Coverage, rotatable for use in either vertical or horizontal orientation
  • CMCD™ Cone Midrange Compression Driver™ provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency
  • PT™ Progressive Transition™ Waveguide for excellent pattern control with low distortion
  • Bi-Amp/Passive Switchable
  • Optional planar array frame kits PAF-2K for 3-wide array with ASB6118 subwoofer in center or PAF-3K for AL6115 LF in center (See AE Series Array Guide)
  • Use with LF and/or subwoofer cabinets in fixed installation applications such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live nightclubs, discotheques, sports facilities and themed entertainment venues. For use alone in delay fill applications. Can use without LF reinforcement in voice-only PA and delay fill applications
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
System Specifications:
  • Frequency Range: 350 Hz - 23 kHz (-10 dB)
  • Frequency Response: 400 Hz - 20 kHz ( ± 3 dB)
  • Coverage Pattern: 60° x 40°, rotatable waveguide
  • Directivity Factor (Q): 25
  • Directivity Index (DI): 14 dB
  • Crossover Modes: Bi-amp/Passive switchable
  • Passive Crossover Slopes: MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.8 kHz
  • Transducer Power Rating (AES):
    • MF: 125 W (500 W peak), 2 hrs
    • 100 W (400 W peak), 100 hrs
    • HF: 35 W (120 W peak), 2 hrs
  • Long-Term System Power Rating (IEC)4: Passive mode: 125 W (500 W peak), 100 hrs
  • Maximum SPL:
    • Bi-amp mode:
    • MF: 127 dB-SPL cont avg (133 dB peak)
    • HF: 129 dB-SPL cont avg (135 dB peak)
    • Passive mode:
    • 127 dB-SPL cont avg (133 dB peak)
  • System Sensitivity (1W @ 1m): Passive mode: 106 dB SPL
Transducer Specifications:
  • Midrange Driver: JBL CMCD-61H Cone Midrange Compression Driver with integral
  • 150 mm (6 in) diameter internal driver
  • Nominal Impedance: 8 ohms
  • Sensitivity (1W @ 1m): 106 dB SPL
  • High Frequency Driver: JBL 2407H/MTA, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil
  • Nominal Impedance: 8 ohms
  • Sensitivity (1W @ 1m): 114 dB SPL
  • Waveguide: PT-K64MH
Physical Specifications:
  • Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
  • Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
  • Finish: Black DuraFlex™ finish. White available upon request
  • Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing
  • Input Connector: NL4 Neutrik Speakon® and E-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through
  • Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
  • Dimensions (H x W x D in 548 x 561 x 657 mm vertical cabinet orientation): (21.6 x 22.1 x 25.9 in)
  • Net Weight: 28.1 kg (62 lb)
  • Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers Optional planar array frame kit. See AE Series Bracket Guide

Loudspeaker Specifications

This is the type of professional loudspeaker. Active loudspeakers have a built-in amplifier to power the speakers. Passive loudspeakers require an external amplifier to be properly powered.
High Frequency Driver Size
This is the size of the high frequency driver. Common sizes include 1", 1-1/2" and 2".
Low Frequency Driver Size
This is the size of the low frequency driver. Common sizes include 10", 12", and 15".
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
350 - 23,000 Hz
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
135 dB
Maximum Sound Pressure Level SPL
This is the maximum Sound Pressure Level (SPL) of the professional loudspeaker. The higher the SPL rating, the louder the monitors are able to go.
This is the horizontal and vertical audio dispersion of the professional loudspeaker. The dispersion is measured in degrees.

Active Power Specifications

Peak Power Rating
This is the peak power output that the active loudspeakers is rated at.
Continuous Power Rating
This is the continuous power output that the active loudspeakers is rated at.
Amplifier Class
This is the class of amplifier inside the active loudspeaker.
Amplifier Controls
These are the different types of controls, adjustments, and dials that are on the active loudspeaker.
Built-in Equalizer
If the active loudspeaker has an internal equalizer it will be identified here.

Passive Power Specifications

Peak Power Handling
This is the maximum amount of power (measured in watts) that the speaker is designed to receive.
Program Power Handling
This is the amount of program power (measured in watts) that the speaker is designed to receive.
Continuous Power Handling
This is the amount of power (measured in watts) that the speaker is designed to receive continuously.
Nominal Impedance
This is the nominal input impedance of the passive loudspeaker.

Physical Features

These are the types of input connections that connect to the professional loudspeaker.
These are the types of output connections that connect to the professional loudspeaker.
Enclosure Material
This is the material that the speaker's enclosure is made out of.
Carrying Handles
Carrying handles are found on the enclosure and they make transporting the speaker easier.
Speaker Mounts
Speaker mounts enable the loudspeaker to be mounted to a stand or tripod.
The height of the item, measured from top to bottom, in inches.
The width of the item from left to right (side-to-side) measured in inches.
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Weight (Pounds)
This is the weight of the item in pounds (lbs).

Specials with this Item

Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Searches Related to the JBL AM4200/64

Product Summary


Model Number




Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JBL AM4200/64

Item Added to Cart

JBL AM4200/64

500W Mid-High Frequency Loudspeaker & Rotatable Horn with Cone Midrange Compression Driver


Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection