Access exclusive offers, news and more.
Thanks for signing up.You'll be the first to receive updates about new collections, top brands, and exclusive products.
(Open Box) 1000W Max, SuperCar Series Monoblock Hybrid Amplifier (Lite Box Bass 1)
SuperCar Series 1-Channel Class GH Car Amplifier • 300W x 1 Chan. @ 4 ohms • 500W x 1 Chan. @ 2 ohms • MOSFET Power supply • Bass Boost EQ • Internal Convection Cooling • Aluminum Alloy Heatsink • Linkwitz-Riley active low-pass
Learn more about the LS-litebox1-OBSuperCar Series 1-Channel Class GH Car Amplifier • 300W x 1 Chan. @ 4 ohms • 500W x 1 Chan. @ 2 ohms • MOSFET Power supply • Bass Boost EQ • Internal Convection Cooling • Aluminum Alloy Heatsink • Linkwitz-Riley active low-pass
Maximum power and minimum weight are the influencing factors when it comes to designing a Supercar – and these same factors have been taken into account with the LiteAir range by VIBE. Designed for vehicles where space is limited.
LiteAir delivers high end audio from a super small package. Combining class leading technologies with typical VIBE innovation the LiteBox range of amplifiers are one of the smallest available in the USA yet they still pack enough punch to compete with others four times their size.
The LiteBox Bass 1 Amplifier is not only powerful on its own, it's also expandable. This particular Hybrid amplifier uses class GH circuitry. This combination of circuitry allows for more efficiency while retaining sound quality. Usually bass amplifiers can generate high amounts of heat while outputting, and to prevent this the GH circuitry was engineered to optimize efficiency while dissipating large amounts of heat. This lets you listen to your music longer, and louder.
Power ratings on this particular amplifier are specified to push 300 watts RMS at 4 Ohms, and 500 watts RMS at 2 Ohms. This particular amplifier may seem extremely powerful on its own, but you can even strap multiple LiteBox Bass 1 amplifiers together to achieve a higher output rating at impressive impedance levels. Two LiteBox Bass 1 amplifiers can output 600 watts RMS at 8 Ohms, and 1000 watts RMS at 4 Ohms. This allows for maximum efficiency while pushing large amounts of power and will truly have your amplifier working at a comfortable rate to output a lot of bass.
Learn more about the Vibe Audio Litebox Amplifiers: Stereo Wise Review
Internal Product ID:
34777
5 star |
|
0% |
4 star |
|
0% |
3 star |
|
0% |
2 star |
|
0% |
1 star |
|
0% |
Durability |
|
0 |
Value |
|
0 |
Features |
|
0 |
Design |
|
0 |
Usability |
|
0 |
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
$149.00
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
$12.99
Great for isolating a second batter making it dedicated to the stereo system
$14.99
Does not create a voltage drop to the second battery like conventional isolators
$65.99
Make installation a breeze with the XBTU
$16.99
No-fail termination and current flow, it helps keep your system protected and running smoothly
$13.99
Great for amplifiers that do not accept a large gauge power wire
$9.99
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
$1.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
$2.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
$9.99
Best selling similar products
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
(38)
$164.95
• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
(28)
$214.99
• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier
(2)
$399.99
Kicker CXA1800.1 (46CXA18001T)
• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier
(10)
$399.96
• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier
(6)
$99.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing