Garage
Shop

1600W Kicker + Infinity Bass Bundle

Pair of Kicker 12"10CVR122 Subwoofers + Infinity KAPPA ONE Amp + dB Link 4 Gauge Amp Kit + ANFL Fuse

Kicker
Shop all Kicker
EXCLUSIVE
highlight-star-icon

Pair of 12" Dual 2 Ohm CompVR Series Subwoofers • 1600W Max • 800W RMS • Kappa Series Class D Mono Subwoofer Amplifier • MOSFET Power Supply • Subsonic Filter • Variable Low-Pass Filter • CEA-2006 Compliant Amplifier

Learn more about the 2-10cvr122_kappaone

We apologize

This item has been discontinued

Description


Kicker brand icon

Authorized dealer

Kicker and Infinity Bass Bundle

This Sonic Electronix Exclusive Bass package showcases a Infinity KAPPA ONE Amplifier along with a pair of 12" CompVR Series Subwoofers. This excellent bass package pushes 800 watts of clean, continuous RMS power. The Kicker Subwoofers each have Dual 2 Ohm Voice Coils; meant to be wired in series/parallel, that is to say wiring the voice coils in series and then the subs in parallel, to a final impedance of 2 Ohms. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.

These Kicker 10CVR122 CompVR Series subwoofers require 800 watts of RMS power. The included Infinity KAPPA ONE amplifier will compliment this required power by supplying a perfect match-up of certified RMS continuous power. This package also includes a 4 gauge amplifier kit which is perfect to supply power to the amplifier. We have also added a Scosche 150A ANL fuse to go with your fuse holder that will come with your amp kit. With the Kicker subwoofers, Infinity amplifier, dB Link amplifier kit, and Scosche ANL fuse, this bass bundle is great for anyone looking to upgrade their vehicle's audio system

Kicker 10CVR122 Features:
  • Pair of 12" Dual 2 Ohm CompVR (CVR) Subwoofer
  • Power Handling:
    • Peak: 1,600 watts total / 800 watts each
    • RMS: 800 watts total / 400 watts each
  • Impedance: Dual 2 Ohm
  • Injection molded SoloKon cone
  • Ribbed Santoprene surround
  • Double stitched surround for enhanced cone-to-surround strength
  • Extra strong adhesive and stitching prevents the cone from detaching from the surround
  • Spiralead tinsel lead technology weaves the tinsel leads into the spider
  • Progressive-roll polycotton spider
  • Super rigid cone and 360-degree back bracing eliminate distortion
  • Sturdy steel basket holds the subwoofer mounted firmly
  • Steel basket features perimeter venting around the dual voice coils
  • Large, high-mass pole piece for dissipating potentially damaging heat
  • Strong spring-loaded terminals
  • Newly re-designed 2010 basket structure
  • High-Temperature voice coil
  • Powerful rear magnet
  • Frequency response: 25-500 Hz
  • Sensitivity: 86.9 dB
  • Mounting depth: 6-1/4
  • Also found as: 10CVR12-2 ohm, CompVR122, CVR-122, CVR-12, CompVR 122, CompVR 12" 2 ohm, 2010 CVR122
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Infinity KAPPA ONE Features:
  • Kappa Series Class D Mono Subwoofer Amplifier
  • RMS Power Rating:
    • 4 ohms: 500 watts x 1 chan.
    • 2 ohms: 800 watts x 1 chan.
  • Max power output: 1600 watts
  • MOSFET power supply
  • 3 LED indicators (2 power, 1 protect)
  • Bass Boost (0-12 dB)
  • DirectFET transistors increase power output and overall efficiency
  • Non-Stop Thermal Protection (The amplifier will gradually reduce output to cool the amplifier down instead of shutting it off if it overheats)
  • Dynamic Bass Optimization (DBO): Fine-tune the bass in your system to optimize performance. The frequency control also acts as a subsonic filter
  • Protection Circuitry (DC output, over/under voltage, short circuit)
  • Heavy duty aluminum alloy heatsink for supreme heat dissipation
  • Preamp RCA outputs
  • 1 Channel operation
  • RCA level inputs
  • Screw terminals
  • Variable high-pass filter (10-80 Hz, 12 dB/octave)
  • Variable low-pass filter (32-320 Hz, 12 dB/octave)
  • Subsonic Filter (24 dB at 15 Hz)
  • CEA-2006 compliant amplifier
  • Frequency response: 20-320 Hz
  • Dimensions: 13"L x 7-1/16W x 1-3/4H
  • 4-gauge power and ground wiring is required for installation.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
dB Link CK4Z Features:
  • 4 Gauge Complete Amplifier Installation Kit
  • Designed specifically for car audio systems up to 2000 watts
  • Premium power and ground wire provides optimal power transfer
  • Made with oxygen-free copper for a pure uninterrupted transfer of power
  • Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
  • RCA Interconnects are made with twisted-pair technology for noise reduction
  • Terminals are nickel-plated for excellent signal transfer
  • ANL Fuse holder offers ideal protection for mid level systems
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
dB Link CK4Z Includes:
  1. 17 ft. of 4 AWG Blue power cable
  2. 3 ft. of 4 AWG Silver ground cable
  3. 17 ft. of 18 AWG Blue remote turn-on wire
  4. 17 ft. of Blue twisted pair shielded RCA cable
  5. 25 ft. of 16 AWG Blue speaker wire
  6. 4 AWG In-line ANL fuseholder
  7. 100 Amp ANL fuse
  8. 6 ft. Black split loom tubing
  9. Other Installation Accessories
Scosche EANL150 Features:
  • e2 150A ANL Fuse (1 per pack)
  • Platinum plated

Specifications & Details


Amplifier Power Specifications
RMS Power @ 4 ohms
500 watts x 1 channel
RMS Power @ 2 ohms
800 watts x 1 channel
RMS Power @ 1 ohm
Not Stable
Peak Power Output
1600 watts x 1 channel
Amplifier Specifications
Number of Channels
1 - Mono
Total Peak Power Output
1600 watts
Total RMS Power Output
800 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
THD at Rated RMS Power
.05%
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
10 - 80 Hz
Low-Pass Crossover Frequency
32 - 320 Hz
Signal-to-Noise Ratio
85 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
No
Fan Cooled
No
Fuse Rating
40A x 3 
CEA-2031 Compliant
Yes
Subwoofer Specifications
Number of Subwoofers
2
Subwoofer Size
12"
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
2 ohms
RMS Power Handling
400 watts
Total RMS Power Handling
800 watts
Peak Power Handling
800 watts
Total Peak Power Handling
1600 watts
Woofer Surround
Santoprene Rubber
Woofer Composition
SoloKon Polypropylene
Minimum Sealed Box Volume
1.0 cubic feet
Maximum Sealed Box Volume
4.6 cubic feet
Minimum Ported Box Volume
1.75 cubic feet
Maximum Ported Box Volume
2.25 cubic feet
Sensitivity
86.9 dB
Frequency Response
25 - 500 Hz
Top-Mount Depth (Mounting Depth)
6-1/4"
Cutout Diameter
11"
Recommended Enclosure Type
Ported / Vented
Sealed
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

2-10CVR122_KAPPA-ONE

Weight:

45.25lbs

Internal SKU:

2-10cvr122_kappaone

Internal Product ID:

35762

Customer Ratings & Reviews



5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...
Sorry, no reviews found

Add-ons


Similar Products

Best selling similar products

NVX QBUS8P

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(6)

$129.99

NVX QBSTA

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

$249.99

Pioneer TS-WX1210AM

• 350 watts Single 12" Subwoofer Enclosure
• 4 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 10" TD x 12-1/2" BD x 19-3/4" W x 14-7/8" H

(2)

$179.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(153)

$279.95

Belva BPKG210v2 Dual 10" Subwoofer and Amp Package with Box and Wiring Kit

• Works with both Factory and Aftermarket Audio Systems
• Dual 10" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(29)

$214.99

Related Searches


2-10CVR122_KAPPA-ONE small

Item added to your cart.

Price: $478.21

Essential add-ons
Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$59.99

$34.99

Add to cart
NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

$114.99

$99.99

Add to cart
40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

$279.99

$89.99

Add to cart
Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$383.95

$235.99

Add to cart
Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

$219.00

$140.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$199.99

Add to cart
Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

$461.99

$451.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon