Garage
Shop

Precision Power PPI P900.4

900W Phantom Series Class D Full Range 4-Channel Amplifier

Product videos
highlight-star-icon

• RMS Power: 145 watts x 4 @ 4 ohms, 225 watts x 4 @ 2 ohms
• 450W RMS x 2 Channel @ 4 ohms Bridged
• Tri-Mode Capable
• 3-Way System Protection
• Variable Low-Pass Crossover
• Variable High-Pass Crossover
• Band-Pass Crossovers
• Input Source Selector

Learn more about the p9004

We apologize

This item has been discontinued

Product Highlights


• RMS Power: 145 watts x 4 @ 4 ohms, 225 watts x 4 @ 2 ohms
• 450W RMS x 2 Channel @ 4 ohms Bridged
• Tri-Mode Capable
• 3-Way System Protection
• Variable Low-Pass Crossover
• Variable High-Pass Crossover
• Band-Pass Crossovers
• Input Source Selector

Description


Precision Power brand icon

Authorized dealer



Sonic Electronix Power Certified Amplifier

Precision Power's P900.4 4-Channel amplifier is a Sonic Electronix Certified Amplifier. This amp's power output has been professionally tested with our SMD Amplifier Dyno, bringing you it's true power ratings.

Impedance
Claimed Output
Certified Results
Dynamic Results
4 Ω
145W @ 14.4V
149W @ 14.11V
152W @ 14.13V
2 Ω
225W @ 14.4V
255W @ 14.01V
271W @ 14.14
4 Ω Br.
450W @ 14.4V
480W @ 14.11V
491W @ 14.14V



General Features:

  • Phantom Series Class D Full Range 4-Channel Car Amplifier
  • RMS Power Rating (14.4V):
    • 4 ohms: 145 watts x 4 chan.
    • 2 ohms: 225 watts x 4 chan.
    • Bridged, 4 ohms: 450 watts x 2 chan.
  • RMS Power Rating (12V):
    • 4 ohms: 100 watts x 4 chan.
    • 2 ohms: 150 watts x 4 chan.
    • Bridged, 4 ohms: 300 watts x 2 chan.
  • Sonic Electronix Certified Power Rating*:
    • 4 ohms: 149 watts x 4 chan.
    • 2 ohms: 255 watts x 4 chan.
    • Bridged, 4 ohms: 480 watts x 2 chan.
  • MOSFET power supply
  • LED power (green) and protect (red) indicators
  • On/Off circuit delay
  • 4/3/2 channel operation
  • 3-Way System Protection circuitry
  • Tri-mode capable
  • Band-pass crossovers
  • Input source selector
  • SMT Circuitry
  • Composite double sided epoxy PCB
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity:
    • Low level: 200mV-6V
  • Variable high-pass filter (20-4000 Hz, 12 dB/octave)
  • Variable low-pass filter (50-5000 Hz, 12 dB/octave)
  • Damping factor: >114
  • Dimensions: 10-15/16"L x 6-3/4"W x 2"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
145 watts x 4 channel
RMS Power @ 2 ohms
225 watts x 4 channel
RMS Power @ 1 ohm
Not Stable
Bridged RMS Power
450 watts x 2 channel
Amplifier Specifications
Series
Phantom Series
Amplifier Class
D
Number of Channels
4-Channel
Total RMS Power Output
900 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
Speaker Level Inputs
No
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Remote bass/level controller
No
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

P900.4

Weight:

6.50lbs

Internal SKU:

p9004

Internal Product ID:

38338

Product and How-to Videos


  • Precision Power PPI Phantom P900.4 Car Amplifier | SMD D'Amore AD-1
  • Precision Power Phantom Amplifiers
  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
89%
4 star
7%
3 star
0%
2 star
2%
1 star
2%



Durability
4.6
Value
4.8
Features
4.6
Design
4.5
Usability
4.6

Customer Reviews

Sort by:

Loading...

Simply can't be beat! A steal for the price.

If you want an inexpensive, powerful amp that is very well suited to SQ applications, look no further than this puppy. Gobs and gobs of really clean power, and stays cool even in tight spaces, and its so small! The built in crossovers are also a very nice feature, giving one the ability to go active without needing an expensive DSP.

It's cleaner sounding and puts out just as much power (and 150W more bridged, infact) as my dad's Alpine PDX-F6, all at a quarter of the price! I've had it for just over 6 months and have had no issues whatsoever with the amp. I have it running in 3 channel mode currently, hooked up to Morel Tempo 6 components for my front stage and bridged on the rear for my 15" JBL GTO sub in IB, with the source all coming from my DEH-80PRS. Godly sound. Planning on purchasing another Phantom amp soon, the P1000.1 (from Sonic of course, even being in Canada, they're still the cheapest around, not to mention the great customer service) for my sub and then going fully active with my front stage.

By Jordan on January 23, 2015

63

found this helpful.

PPI P900.4 Big power little package

This amp is small and does a great job, it has plenty of power for most car systems and stays cool. I cant say anything bad about it. Have a good set of speakers because this amp has got big power!! I am running 2 set of Polk mm6501 off this amp and it sounds very good!!
For the price you cant go wrong, this is a deal..

By Jones on March 25, 2014

62

found this helpful.

seems great to me!

using this amp at half the rated power and it sounds great. doesnt get hot. would love to hear the potential at the full 140 rms but my speakers only handle 70. reasonably small amp, and connections are all tight and clean. comes with a 0 gauge adaptor for some reason but i guess the more power the merrier. pretty dang cheap too! only had it for a month, but so far its money well spent.

By John on January 1, 2015

55

found this helpful.

best amp for $$ period

Runs cool and has gobs of power. I have it running a pair of 8" fosgates and a pair of 6X9 Infinities in my Nautique. It flat out pounds. I would recommend this amp / speaker combo every time.

By john on April 21, 2014

52

found this helpful.

disappointed

i was disappointed with this amp. it worked and performed as expected, but the design of the amp is flawed. as some reviews stated, two Phillips screws on the speaker/power/ground terminals are difficult to tighten with a screw driver and the Phillips heads are easy to get rounded and as a result you cannot get a good contact with the wires .(power/ground/speakers) i contacted precision power via email to see if i can purchase the terminal screws but i did not get a reply and its been about 3 weeks now. because of this i'm giving this product 1 star.

By naresh on September 10, 2013

51

found this helpful.

Excellent Amp

I purchased this to power two wetsounds Pro80 speakers on my wakeboard tower. I run it bridged & it delivers! Loud clear power. I ended up purchasing the p600.2 & p900.5 as well to run the rest of my system & proudly boast one of the loudest systems at the lake. Requires less power than conventional amps & they take up half the space. Very happy, I tell you buy this amp, mine came with free foam peanuts.

By david on July 28, 2013

51

found this helpful.

Amazing Amp!

I had all the common worries that we all have when buying amps, Does it have ignition/alternator whine issues?, will it cut out up high or can it really handle high loads?. i upgraded to this amp from the Infinity Kappa 4 and considering they are both within the same rms range, this amp is so much better, brought this thing worrying it was not going to deliver, but once i installed it, boy did it deliver simply amazing amp! i have it powering infinity Kappa Perfects and the sound quality is unsurpassed, everyone loves my system! Would recommend this amp!

By Davinci on July 24, 2013

53

found this helpful.

Clear and powerful in a small package.

I recently installed this amplifier and it certainly has more power than I need for my system. Very clear and loud. no distortion or interference. It has versatility in installation being 2ohm stable. The documentation could be much better. Use a small philips screwdriver and you will have no problems installing the speaker and power wires. Don't forget to buy the 8ga inline fuse, for install.

By Robert on November 18, 2012

54

found this helpful.

Good things come in small packages

I got this amp to go active in my SQ install. Being a PPI fan for many years I had to try this one. I was not disappointed. It has plenty of power and is very clean sounding. I have this installed along with my older PPI's and it is right at home. In the SQ circle this amp is quickly growing in popularity.

By JD on October 14, 2014

55

found this helpful.

Great value, power and size

Great value, power and size. Almost too powerful, had to turn the gain way down.

By Robert on May 7, 2013

51

found this helpful.

Add-ons


Similar Products

Best selling similar products

JL Audio XD400/4v2

• 75 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier

(9)

$349.99

NVX VAD10004

• 150 watts x 4 channel @ 4 ohms
• 250 watts x 4 channel @ 2 ohms
• Bridged: 500 watts x 2 channel @ 4 ohms
• Total RMS Power: 1000 watts
• CEA-2006 Compliant
• Class D 2 ohms Stable 4-Channel-Channel Amplifier

(14)

$279.99

NVX VADM4

• 400 Watt True RMS Output!
• Marine Certified 4-Channel Micro Class D Amplifier
• 75W x 4-Chan. @ 4 ohms
• 100W x 4-Chan. @ 2 ohms
• 3-Way System Protection
• 4/2 Channel Operation
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint!

(31)

$189.99

Rockford Fosgate PBR400X4D

• 50 watts x 4 channel @ 4 ohms
• 100 watts x 4 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms
• Total RMS Power: 400 watts
• Class D 2 ohms Stable 4-Channel Amplifier

$279.99

Taramps DS 1200X4

• 192 watts x 4 channel @ 4 ohms
• 300 watts x 4 channel @ 2 ohms
• Bridged: 600 watts x 2 channel @ 4 ohms
• Total RMS Power: 1200 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier

$204.99

Related Searches


P900.4 small

Item added to your cart.

Price: $179.99

Essential add-ons
Belva BAK44

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$79.99

$39.99

Add to cart
Belva BAK44BL

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$79.99

$39.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
4 inputs / 4 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC44X helps you easily integrate with your factory or aftermarket system

$149.99

$64.99

Add to cart
NVX XIX45 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

$44.99

$20.99

Add to cart
NVX V-Series RCA Interconnect Cable

19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

$32.99

$15.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
NVX VUBT2

Universal Bluetooth Audio Receiver

$49.99

$39.99

Add to cart
Marine Grade Bluetooth Audio Controller/Receiver

Marine Grade Bluetooth Audio Controller/Receiver

$62.49

$48.99

Add to cart
NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

$99.99

$59.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon