Like others mentioned its a solid product, Using it on 4 gauge power wire. The cover snaps back on tight & not loose like other distribution block covers. Another great product from NVX.
2 Position Fused Distribution Block with One 0/1 Gauge Input and two 4/8 Gauge Outputs
Let's Power Up!
NVX is proud to introduce the XFDBU2 Two Position Fused Distribution Block. This is the perfect solution for multiple amp wiring. This allows you to run one power wire from your battery to 2 fused power outs with the option of different amperage fuses.
As with all NVX products, you can can expect truly great design and engineering. The XFDBU2 is made of solid brass and satin chrome plated for the best power transfer possible.
- 2-Position Mini-ANL Fuse Holder
- One 1/0 gauge or 4 gauge Input
- Two 4 gauge or 8 gauge Outputs
- Made of Solid brass and satin chrome plated for the best power transfer possible
- High temperature polycarbonate base and cover
- No-fail termination and current flow
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
Distribution Block Specifications
For fuses, this is the type of fuse.
Specials with this Item
Warranty and Return Policy
Summary of Customer Ratings & Reviews
January 9, 2014
38 of 44 found this helpful
New Orleans, LA
August 22, 2013
Great quality and weight with a nice solid cover for show. Will buy nvx products again!!!!!
36 of 43 found this helpful
September 17, 2013
Top quality, solid 2 fuse holder / distribution block. The cover snaps on without concern but be careful when aligning the tabs
31 of 37 found this helpful
December 8, 2014
Very simple install, appears to be a quality piece of equipment. Comes with adapters for 4/8 GA wire as well (can have 0/1 or 4 GA input with 4 GA or 8GA output. One size allen key to adjust everything. Looks nice. No complaints.
29 of 34 found this helpful
October 19, 2014
I bought this distribution block when I bought the rest of my set-up from Sonic. The construction is very well and is definitely not cheap feeling. The one I received had a broken tab on the top, and without hesitation they sent me a brand new one free of charge. Nvx makes excellent products and the xfdbu2 is a superb accessory.
27 of 33 found this helpful
February 26, 2015
Works nice. Small and compact and can fit it anywhere.
23 of 27 found this helpful
August 10, 2014
Works perfect, installed this between my two amplifiers and it looks clean. Mounts well on MDF.
26 of 33 found this helpful
March 23, 2015
The product is exactly what I needed. I have a 1/0 power source and my amp needs a 4 gauge power cable. This allows me to add another amp on the future when I'm ready. Love it!!!!
21 of 26 found this helpful
Rock Springs, WY
October 19, 2015
I have gone through several fuse holders in numerous different installs, and the products by NVX always exceed my expectations. This fuse holder is built from quality materials and is not flimsy at all. The cover does not become brittle in colder weather (about 10 degrees F) which is normally a problem with others. It is also impervious to gas and oil which makes it a great fit under the hood and next to the battery. While the white label paint on the top disappears easily with chemicals, it does not seem to affect the plastic. The Allen set screws for the cables and well tapped and are very hard to over tighten or strip; the same also applies to the screws for the fuse itself. I would highly recommend this and other NVX products. They have yet to let me down!
1 of 1 found this helpful
November 18, 2015
Only complaint is the cover not staying on after installation. Other than that, it does what it's supposed to do.
0 of 0 found this helpful
I just use the amp fuse from my battery to my amps
This depends on the setup. If you do not already have a fuse within ~8" of the battery, then you'd want it there. However, if you do, then it doesn't really matter where the location is in conjunction with the location of the amp/battery. It will logistically be more practical if you kept it closer to the amps.
It does not, because neither we nor the manufacture know what amperage fuse your install requires. Below is a link to all mini-anl fuses
Internal Product ID
Wiring Diagram Legend
Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.