NuForce ICON HDP + NVX XPT100 + i.Fuzen HP-1 Complete Headphone Package

Headphone Amplifier + Over-Ear Studio Headphones + iPhone 4/4s Case

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

NuForce Icon HDP Premium Desktop Headphone Amplifier & DAC (Black)

24-Bit/192 kHz Headphone Amp and Preamp Output with USB, S/PDIF Coaxial, and 3.5mm Optical
Quantity: 1

Product Features:

  • Headphone Amp and DAC
  • USB DAC with 24-bit resolution and 96 kHz sampling rate
  • S/PDIF coaxial and optical 3.5mm conversion at 24-bit resolution and 196 kHz sampling rate
  • Quality headphone amplifying circuit and preamp out for complete integration and audiophile sound quality
  • Supports digital USB, S/PDIF coaxial, and 3.5mm optical for a remarkably broad range of compatibility
  • No capacitors in the signal path for absolutely no loss in signal quality
  • Few components along the signal path further minimize possible sources of distortion
  • To minimize electrical interference, the digital circuit is built on an independent daughter board
  • Primary Color: Black
  • Manufacturer/Part Number: NuForce NF-ICON-HDP-BLACK
  • Also available in Red, Blue, and Silver
  • Package includes:
    • Toslink to optical mini adapter
    • 6.3mm stereo plug (male) to 3.5mm stereo connector (female) adapter
    • Silicone stand
    • AC adaptor (15V, 1.6A, 100-240VAC)

Technical Specifications:

  • Analog Inputs: RCA or 3.5mm
  • Digital Input: S/PDIF Coaxial and 3.5mm Optical
  • Coaxial Input Impedance: 75 Ohms
  • USB Digital: USB 1.0 and 1.1 up to 44.1kHz/16-bit, USB 2.0 Full-Speed up to 96kHz/24-bit
  • RCA Output: 2.6 Vrms, Output impedance 100 Ohm
  • Headphone Output: 6.3mm full-size headphone output jack drives headphones up to 600-Ohm; Output impedance 10 Ohm
  • Frequency Response: 10-100000 Hz
  • SNR: >100 dB
  • Power Requirement: 12-15V
  • Dimensions: 6"W x 4-1/2"D x 1"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

NVX Audio XPT100

Studio Over-Ear Headphones w/ ComfortMax Earpad Cushions and Extra Pair of Angled Earpads
Quantity: 1

General Features:

  • Studio Over-Ear Headphones with Carrying/travel case
  • ComfortMax® Cushion earpads provide superior comfort for long listening sessions
  • Large 42mm neodymium drivers bring depth & dimension to music
  • Smooth, even tonality, ideal for studio monitoring and mixing
  • Exceptionally accurate acoustical performance
  • Replaceable parts for long service life. The headband, earcups, earpads, and cord are all easily replaceable for years to come!
  • 1/4" adapter for studio mixing and other stereo applications
  • Compatible with portable devices and excels with amplification
  • Enclosed ear design for limited outside noise interference
  • Adjustable headband for optimum customization
  • Gold-plated, corrosion-resistant stereo jack
  • Replacement Ear Cushions: Standard Cushions and Angled Cushions Available
  • Authorized Internet Dealer
  • 2 Year Manufacturer's Warranty

Product Specifications:

  • Frequency Response: 10-26,000 Hz
  • Sensitivity: 100 dB
  • Nominal Impedance: 64 Ohms
  • Cord Length: 1.2 m & 3 m
  • Acoustic Principle: Closed
  • THD: <0.2% at 1khz
  • Magnet Material: Neodymium
  • Weight/Mass: 10.2647 oz (291g)
  • Speaker Diameter: 42mm

What's in the Box?

Phiaton MS 530 (MS530)
  • NVX Audio XPT100 Headphones
  • Two Sets of ComfortMax Ear Cushions
  • 1/4" Stereo Adapter
  • Carrying Case
  • 4 Ft. (1.2 meter) Detachable Cable
  • 10 Ft. (3 meter) Detachable Cable
  • Instruction Manual
  • Warranty Card

Ideal for any device with a headphone jack!

iPhone 4/4S All-in-One Headphone Amplifier, Extended Battery, and Protective Case!

i.Fuzen HP-1 (Original V1 - Black) iPhone 4/4S Case with Built-in Amp, Case, and 1650mAh Battery
Quantity: 1

Cell Phone Case Features:

  • Proprietary Auzentech Headphone Amplifier
  • Dual Headphone Output port to share your listening with your friends
  • ZX-Driver provides Ultra-Low Distortion and Max 180mW output power
  • J-FET OP-AMP to provide Vacuum Tube like sound output
  • Proprietary Auzentech Balanced Power Supply
  • Sound Mode, Selector button & Status Indicator
  • Touch panel volume control
  • Unique & compact design to match your iPhone 4 look
  • Impressive 1650mAH Li-Polymer battery with Smart protection circuit
  • 4-Steps LED battery life meter and battery life check button
  • Charge via USB port (from desktop PC or Laptop) with supplied USB cable
  • Supports USB pass through, iTunes Sync
  • Last up to 500 full charges
  • Color: Black
  • Also available in: White
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
iFuzen HP1 battery life chart

Device Specifications:

  • Battery Life: 1650 mAh
  • Supports USB pass-through
  • Output voltage: DC 5V
  • Output current: 500 mA
  • Maximum Input current: 800 mA
  • Output Power: 180mW (90mW + 90mW @ 32 Ohms
  • Frequency Response: 5Hz - 100kHz, +/- 0.23dB
  • Input Sensitivity: 1.25V RMS
  • Maximum Gain: +9dB
  • Input Impedance: 50 kOhms
  • Load Impedance: 32 - 600 Ohm
  • Total Harmonic Distortion: 0.002%,@ 1kHz into 32 Ohms
  • Signal to Noise Ratio: 113dB (A-weighted)
  • Product size : 62.7mm(W) x 133.4mm(H) x 15.3mm(D)
  • Weight: 70g

Battery Specifications:

  • 1650mAh rechargeable lithium polymer battery
  • DC 5V/500mA Power output
  • Audio playback Up to additional 44 hours
  • Video playback Up to additional 11 hours
  • Talk time Up to additional 8 hours

Headphone Amplifier Specifications:

  • 180mW Headphone output power
  • 32 - 600 Ohm Load impedance
  • 113dB(A-weighted) Signal to noise ratio

Compatible Cell Phones:

  • iPhone 4
  • iPhone 4S


Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
The height of the item, measured from top to bottom, in inches.
The width of the item from left to right (side-to-side) measured in inches.
Color of handle.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Searches Related to the NuForce XPT100-ICONHDP-BLACK-HPORIGINAL-BLACK

Product Summary


Model Number




Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: NuForce ICON HDP + NVX XPT100 + i.Fuzen HP-1 Complete Headphone Package

  • Differences Between Headphone Acoustic Principles | Open, Closed, & Semi-Open
  • Headphones Based on Musical Preference | What Type of Listener Are You?

Item Added to Cart

NuForce ICON HDP + NVX XPT100 + i.Fuzen HP-1 Complete Headphone Package

Headphone Amplifier + Over-Ear Studio Headphones + iPhone 4/4s Case


Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection