JL Audio CS210G-TW3
1600W Sealed ProWedge enclosure with two 10" TW3 Subwoofers
- 1600W Dual 10" Sealed Subwoofer Enclosure
- Power Handling:
- Peak: 1600W Total (800W Each Sub)
- RMS: 800W Total (400W Each Sub)
- Impedance: 8 ohms per driver at each terminal
- The pair of terminals can be wired in parallel to provide a 4Ω load
- Preloaded with dual 10" TW3 Series Subwoofers
- Sealed enclosure with high-grade automotive carpet finish
- Enclosure Dimensions: 17-5/8" D x 12-7/16" W x 14-1/4" H
- 2 Year Manufacturer's Warranty
- Injection Molded Polypropylene Cone
- Frequency Response: 24-200 Hz
- Sensitivity: 82dB
- Mounting Depth: 3-1/4"
- Dual 10" sealed enclosure
- 5/8" MDF construction
- Durable Carpet Finish
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.
Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.
Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.
Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.
Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile
Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.
Warranty and Return Policy
25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)
Your Price $19.99
Internal Product ID
Wiring Diagram Legend
Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.