RE Audio SCXv2-10d4 (SCX10 v2)

450W 10" SCXv2 Series Dual 4 Ohm Subwoofer (SCXv2-10d4)

Discontinued
|
Car Bass Deals

Would you also like a gift on your Birthday?

Car Audio Birthday

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

RE Audio Store

The all new SCX v2 Subwoofer Series by RE Audio is a replacement of the very celebrated SRX series. RE Audio went above and beyond to provide the market with a high quality, reliable and well performing driver. This goal resonates with the architecture of the driver, going from a lame stamped basket frame to a higher quality, better looking and more durable cast basket. In addition, the power handling is from a lowly 300 watts (RMS) to an above modest 450 watts. Expect louder output and lower lows along with better exotic styling, while still maintaining the desirable RE Audio look and Performance! Complete the setup with the matching RE Audio SA 1500.1 amplifier, that provides the exact power that the subwoofer(s) is asking for.


General Features:

  • 10" Dual 4 Ohm SCXv2 Series Subwoofer
  • Power Handling:
    • RMS: 450 watts
  • Dual composite 2-piece cone
  • Rubatek foam surround
  • Cast aluminum basket
  • Tork-Tite terminals
  • Double stacked magnets
  • FEA optimized motor structure
  • 2.5" 4-layer aluminum voice coil
  • One-Way Linear Excursion (Xmax): 18.6 mm
  • Sensitivity: 86.4 dB 1 watt / 1 meter
  • Top-mount depth: 5.50"
  • Cutout Diameter: 9.30"
  • Displacement: 0.14 ft³
  • Weight: 16.4 lb
  • Matching amplifier: RE Audio SA 1500.1
    ✔ Add a Second Subwoofer for a 900 watt (RMS) setup!
  • Also available in a 12" version: RE Audio SCX 12 v2
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
  • Also Found As: SCX10D4-V2, SCXV2-10D4, SCXV210D4

Need the Perfect Subwoofer Enclosure?

Check out the RE Audio RE Audio SCX 10 v2 Subwoofer Enclosure Guide

Product History:

RE Audio SCXv2-10d4 thumbnail
(newest, current model)
RE Audio SRX10D4 thumbnail
(previous model, replaced by RE Audio SCXv2-10d4 (SCX10 v2))

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
SCXv2 (RE Audio)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
450 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
2.5"
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
86.4 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
18.6 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Composite Polypropylene Cone (CPPC)
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Foam
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Double Stacked
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.35 cubic feet
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.50 cubic feet
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.08 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.65 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.00 cubic feet
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.77 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
5.50"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9.30"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
4 ohms

What is in the box?

WITB: Subwoofers
A detailed list of the equipment (main product and accessories) included with your subwoofer. If special accessories are included in the box, they will be listed and detailed below the main list of equipment.
Paperwork
Paperwork included with the product.
Other Accessory #1
Standard accessories are included in the main list above; however, this line provides specific details on an additional, unique accessory that is included with the product.
Other Accessory #2
Standard accessories are included in the list above special accessories; however, this line provides specific details on an additional, unique accessory that is included with the product.
Other Accessory #3
Standard accessories are included in the list above special accessories; however, this line provides specific details on an additional, unique accessory that is included with the product.
Other Accessory #4
Standard accessories are included in the list above special accessories; however, this line provides specific details on an additional, unique accessory that is included with the product.
Other Accessory #5
Standard accessories are included in the list above special accessories; however, this line provides specific details on an additional, unique accessory that is included with the product.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
50%
4 Star
50%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.8
Value
4.8
Features
4.3
Design
4.3
Usability
4.5
sin city basshead

las vegas nevada

Overall
Durability
Value
Features
Design
Usability
great quality and great sound!

February 15, 2015

At first i was a little hesistant when sonic sent me this woofer cause the older model before this was discontinued,but after we built a custom 1.8 cu foot ported enclosure for my truck and heard this baby, WOW I WAS SHOCKED! my first thought was it sounded like 2 12's ...lol i have about 440 watts to it at 2ohms and this baby SLAMS,I know it could handle more but im happy for now cause im still breaking this baby in, I will probably go with a new mono amp with a more powerful re sub when i do upgrade but for now im very happy, this sub sounds great with rap, metal, old school classic rock as well:)

36 of 43 found this helpful

Was this review helpful to you?

michael

chatsworth, CA

Overall
Durability
Value
Features
Design
Usability
nice sub

September 24, 2015

bought 2 of these to go with my RE Audio SA 1500.1 matches perfectly and hits hard.

5 of 7 found this helpful

Was this review helpful to you?

Newbie enthusiast

Waianae,HI

Overall
Durability
Value
Features
Design
Usability
More than I expected

November 9, 2015

This is my first RE audio sub and I was skeptical about using a brand I never heard of. But this sub is more than I expected. This bad boy hits pretty low and hard for a 10. And for the price you can't go wrong.

2 of 3 found this helpful

Was this review helpful to you?

Thumper

Latham, Ohio

Overall
Durability
Value
Features
Design
Usability
Awesome sub for the price

January 30, 2017

IV got this RE Audio scx 10" dvc 4ohm sub in a 1.5 slot ported box on a kicker 500.1 mono amp at 2ohms with 500 rms going to it and it sounds great on everything from Rock to hick-hop.. would recommend to anyone and Sonic got it to me really quick.

0 of 0 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Dual 10" Vented Subwoofer Enclosure

CARB Compliant, 3/4" MDF Dual Enclosure Lined with Premium Carpeted Finish

Your Price $79.99

10" Subwoofer Angled Truck or Hatchback Sealed Enclosure

CARB Compliant, 3/4" MDF Sealed Enclosure Lined with Premium Carpeted Finish

Your Price $34.95

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $59.99

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $64.99

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $99.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

Your Price $11.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $7.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $8.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $19.95

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $19.95

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $33.95

1 RE Audio SCXv2-10d4 (SCX10 v2) Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 RE Audio SCXv2-10d4 (SCX10 v2) Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

3 RE Audio SCXv2-10d4 (SCX10 v2) Subwoofers

Mono Amp

4 Channel Amp

4 RE Audio SCXv2-10d4 (SCX10 v2) Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Items we think you might want
SA 1500.1 main
RE Audio SA 1500.1

• RMS Power: 280W x 1 @ 4 ohms, 500W x 1 @ 2 ohms, 900W x 1 @ 1 ohm
• Total Peak Power: 1800W
• Variable Low Pass Filter
• Dimensions: 4.72" W x 10.24" L x 1.57" H

Your Price $199.99

Browse 2 questions and 5 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
a friend recomened them
johnny c on Nov 26, 2015
great brand and the sale price is unbelievable!!
kevin b on Aug 23, 2015
I have had RE audio before and they make awesome products
Jamie W on Sep 6, 2015
i always wanted to try out re audio product.
Manuel E on Aug 12, 2015
I have two srx10d4 subs and I wanted to add two more. I have a 4k watt amp. Would I be able to add these or should I get all new subs?
Frankie S on Mar 31, 2015
Best Answer: Hello Frankie,

If you are implying that you wish to run two completely different series of subwoofers on the same amp, that is highly inadvisable.
Reply · Report · Rick MStaff on Mar 31, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

SCXv2-10d4

UPC

611892991378

Weight

16.50lbs

Internal SKU

scxv210d4

Internal Product ID

77323

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: RE Audio SCXv2-10d4 (SCX10 v2)

Item Added to Cart

RE Audio SCXv2-10d4 (SCX10 v2)

450W 10" SCXv2 Series Dual 4 Ohm Subwoofer (SCXv2-10d4)

$89.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$10.99
Add Warranty
3 years of protection

Dual 10" Vented Subwoofer Enclosure

CARB Compliant, 3/4" MDF Dual Enclosure Lined with Premium Carpeted Finish

$79.99

Add
NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$39.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$59.99

Add

Don't see the accessory you're looking for?
View all available accessories for the RE Audio SCXv2-10d4 (SCX10 v2).