Audio Technica EarSuit ATH-ES500 BK (ATH-ES500BK)
EarSuit Series Wired On-Ear Closed-Back Dynamic Headphones, Black
Bundles with this Product
Free $5 Gift Card With This Item!
This offer cannot be combined with any other coupons or offers.
(Offer 1 of 1)
Combined Total Price
You Save $5.00
- Wired Passive Noise-Cancelling Stereo Headphones
- On-ear design
- Large 40mm speaker driver produces amazingly clear sound
- 1.2 m cord optimized for digital audio players
- Gold-plated, corrosion-resistant stereo jack
- Great for digital audio
- CCAW bobbin-wound voice coils
- Spiral-brushed, high-grade aluminum housings
- Authorized Internet Dealer
- 2 Year Manufacturer's Warranty
- Frequency Response: 10-25,000 Hz
- Sensitivity: 103dB
- Nominal Impedance: 38 Ohms
- Cord Length: 1.2m
- Cable Type: Y-Type
- Plug Size: 1/8" (3.5mm) mini stereo, gold-plated
- Plug Construction:
- Weight/Mass: 120g
- Speaker Diameter: 40 mm
- Max Input Power: 1,000mW
This is the design of the earpieces on the headphones. Some headphones go inside the ear, while others rest on the outside of the ear. This helps you know exactly what type of headphones you will be receiving.
In-Ear: The ear buds go into the ear. Most often, the right and left ear buds are two separate pieces.
Enclosed-Ear: Usually are found on the larger headphones. They rest on top of the ear and have padding for comfort, as well as enclosing the ear to the speaker. This type of headphone helps to filter out surrounding noise.
On-Ear: This type of headphone involves the speaker sitting gently on the ear without going in the ear or sealing it off.
Headphone type refers to the construction of the headphones.
Around the Ear means that the headphones wrap around the ear to provide a secure fit. This is most often seen in active and sports headphones.
Around the Neck means that the headphones wrap around the neck. This is also seen in active and sports headphones.
Earbuds means that the right and left sides of the headphones are separated and will fit securely into the ear. These are small, compact, and user friendly.
Over the Head headphones mean that the right and left speakers are connected with a support that goes over the head and rests on top. This is the typical headphone type.
The basic design of the headphones. There are 3 different types:
Open: Have ports that allow air through the back of the diaphragms, enabling the headphones to sound like the music is coming from an outside source.
Closed: Completely sealed and have no air passing through the diaphragms. Sounds like you are in a closed off room.
Semi-open: Have slots or ports in the back of the cup and are partially open. This allows for a mixed sound between an open and closed headphone.
Corded means that the headphones use a cord to transfer the audio signal.
Bluetooth means that the audio signal is transmitted from your device to the headphones via a Bluetooth connection.
Corded or Bluetooth means that the headphones can be used as corded headphones or as Bluetooth headphones. They have an input in one or both earcups for use as a corded headphone while they also have a built-in battery for use as Bluetooth wireless headphones.
Wireless means that the audio signal is transmitted wirelessly to the headphones.
The Jack Angle refers to the angle of the input jack on the headphone cable.
Straight Jack: Straight plug with no angle.
Angled Jack: Angled plug, usually a 90 degree angle.
Swivel Jack: A swivel jack is able to swivel between a straight plug and an angled plug.
The physical design of the driver in the headphones.
A balanced armature driver uses a coil wrapped around an armature which is held in between two magnets until it is stimulated by an electrical current. When stimulated, this armature is magnetized which causes it to rotate one way or the other around a pivot point which moves the diaphragm to create sound. Balanced armature driver headphones are generally earbuds and can have multiple drivers in each earbud.
Dynamic drivers are the most common driver type. They feature a permanent magnet, usually neodymium, a voice coil and a conical diaphragm to drive your music. A dynamic headphone driver looks pretty much identical to any typical home theater speaker.
Electrostatic drivers are made up of an extremely thin membrane, usually a coated PET film, stretched between two metal plates. An electrical signal is applied to the metal plates to create an electrical field which, depending on its polarity, draws the speaker diaphragm toward one of the plates which forces air through the perforations in the diaphragm which generates the sound wave.
A planar magnetic driver is made up of a large membrane suspended between two sets of oppositely aligned magnets. An electric charge is applied to the membrane to induce movement and produce sound waves.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Warranty and Return Policy
Internal Product ID
Wiring Diagram Legend
Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.