Access exclusive offers, news and more.
Thanks for signing up.You'll be the first to receive updates about new collections, top brands, and exclusive products.
3000W Consumer Line Series Monoblock Class D Amplifier
• RMS Power: 1800W x 1 @ 4 ohms, 3000W x 1 @ 2 ohms
• Total Peak Power: 6000W
• Adjustable Low Pass Filter
• High Quality Aluminum Heat Sink
• Dimensions: 7" W x 27.9" L x 2.2" H
• RMS Power: 1800W x 1 @ 4 ohms, 3000W x 1 @ 2 ohms
• Total Peak Power: 6000W
• Adjustable Low Pass Filter
• High Quality Aluminum Heat Sink
• Dimensions: 7" W x 27.9" L x 2.2" H
The Audiopipe Consumer Line series amplifiers were reengineered from the ground up in 2012 to provide plenty of high quality power for even the highest end sound system while keeping their footprint as compact as possible. Audiopipe didn’t skimp on the internals of these amps, the Consumer Line features the finest in electronic protection circuitry to protect against harmful short circuits, thermal overloads and overheating. These premium choice amplifiers are sure to impress.
The Consumer Line amplifiers are built with performance in mind, and a quick look under the hood of these amplifiers reveal oversized toroids. These toroids (basically just wire coils) help to regulate the voltage in the amplifier. By overbuilding them, Audiopipe ensures that every CL series amp puts out even, consistent power for the best possible sound, and the longest life from your components.
When redesigning the Consumer Line series, Audiopipe took great care in designing an amplifier that would not overheat. These amps feature a high quality aluminum heat sink with cooling fins running along each side and grills embedded in the top plate to ensure outstanding heat dissipation and prevent any unwanted heat related shutdowns.
The Audiopipe Consumer Line Class D monoblock amps are intended for hard hitting sound, so much so that they were designed for compatibility with 16V vehicle electrical systems. Because the CL series amps are capable of accepting a higher voltage than the standard 12V amplifier, they are able to produce much more power.
Internal Product ID:
92307
5 star |
|
0% |
4 star |
|
0% |
3 star |
|
0% |
2 star |
|
0% |
1 star |
|
0% |
Durability |
|
0 |
Value |
|
0 |
Features |
|
0 |
Design |
|
0 |
Usability |
|
0 |
1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - BLUE
$44.99
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
$149.00
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
$18.99
Comes with everything you need to upgrade your power and ground wire.
$99.99
Great for isolating a second batter making it dedicated to the stereo system
$14.99
Does not create a voltage drop to the second battery like conventional isolators
$65.99
Make installation a breeze with the XBTU
$16.99
No-fail termination and current flow, it helps keep your system protected and running smoothly
$13.99
Great for amplifiers that do not accept large gauge power wire
$7.99
(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing
$9.99
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
$12.99
Best selling similar products
• 75 watts x 4 channel + 180 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 300 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
• Total RMS Power: 700 watts
• Class D 2 ohms Stable 5-Channel Amplifier
(8)
$429.99
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
(38)
$164.95
• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
(28)
$214.99
The perfect kit for your perfect amp!
1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - BLUE
1/0 Gauge Amplifier Wiring Kit with 2-Channel RCA's
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Comes with everything you need to upgrade your power and ground wire.
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
3.0 Farad Capacitor with Digital Read-Out and Built-In Distribution Block
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Belva BAGUH2 AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept large gauge power wire
Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)
2pk - 1/0 Gauge Ring Terminals w 5/16" Opening
(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors