Access exclusive offers, news and more.
Thanks for signing up.You'll be the first to receive updates about new collections, top brands, and exclusive products.
Tested at 750W RMS on our Amp Dyno! (Rated 500W RMS by JBL), 1-Channel Monoblock Class D Car Amplifier with Digital Input Mixer and Graphical Status Display
Each of the MS-A5001’s outputs can be low-pass, high-pass or band-pass (low and high) filtered. You can choose among 97 different crossover points between 20Hz and 20kHz, and select crossover slope rates of 6dB, 12dB and 24dB per octave. For further flexibility, crossover settings are completely independent for each output.
The MS-A5001 uses digital signal processing (DSP) for all input-mixer, crossover and output-level controls. Compared with analog crossover circuitry, DSP circuits produce extremely precise results with a minimum of audible artifacts.
The MS-A5001 features RCA-to-bare-wire adapters to connect to all line-level and speaker-level inputs, and includes a selector switch for matching the amp’s input to the type of signal that it receives.
The MS-A5001’s digital input mixer simplifies configuration by allowing any input signal to be routed to either speaker output.
Sonic Electronix, one of the leaders in car audio, recently visited Harman, the premium global audio and infotainment group, at their research and development locations in Northridge, California and Detroit, Michigan. The purpose of these visits was to utilize and combine the powerful brand of Harman and the industry leading knowledge behind Sonic Electronix to begin working together on developing future car audio projects.
*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.
Manufacturer:
Model Number:
LS-MS-A5001-OBI
Weight:
8.00lbs
Internal SKU:
LS-msa5001-OBIra215362
Internal Product ID:
95689
5 star |
|
0% |
4 star |
|
0% |
3 star |
|
0% |
2 star |
|
0% |
1 star |
|
0% |
Durability |
|
0 |
Value |
|
0 |
Features |
|
0 |
Design |
|
0 |
Usability |
|
0 |
8 Gauge Premium (CCA) Copper Clad Aluminum Amplifier Power Wiring Kit with Speaker Wire
$19.99
Controls bass level and frequency and monitor voltage
$29.99
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
$7.99
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
$149.00
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
$12.99
Great for isolating a second batter making it dedicated to the stereo system
$14.99
Does not create a voltage drop to the second battery like conventional isolators
$65.99
Spade Terminals • 8 Gauge • 1 Red & 1 Black • Nickel Plated
$2.49
Best selling similar products
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
(38)
$164.95
• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
(28)
$214.99
• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier
(2)
$399.99
Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects
Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects
Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects
Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects
8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects
Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects
Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects
8 Gauge Premium (CCA) Copper Clad Aluminum Amplifier Power Wiring Kit with Speaker Wire
8 Gauge Power Amplifier Installation Kit
8 Gauge Amplifier Power Installation Kit
8 Gauge Power Amplifier Installation Kit
Controls bass level and frequency and monitor voltage
Universal Remote Level Bass Control
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Spade Terminals • 8 Gauge • 1 Red & 1 Black • Nickel Plated
Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)