Polaris RZR / RZR XP Glovebox Enclosure & Sub Combo by SSV Works & Wet Sounds

SSV Works RZ3-GBSB10-U Custom Molded Unloaded Glovebox Subwoofer Enclosure + 600W XS Series Single 4-ohm Marine Subwoofer (WetSounds)

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

SSV Works RZ3-GBSB10-U

Custom Molded Polaris XP1000 / 900S 10" Unloaded Glovebox Subwoofer Enclosure
Quantity: 1

General Features:

  • Custom molded 10" subwoofer enclosure
  • 100% fiberglass construction
  • For use with:
    • 2015 RZR 900
    • 2014-15 RZR XP 1000
    • 2014-15 RZR XP 1000 4
  • Easily bolts into the under dash area to utilize the empty space behind the glovebox
    • No cutting required
  • Clear of knees and feet
  • Black texture coat finish matches Commander textures
  • Can be custom painted to match your color scheme
  • Comes with stainless mounting hardware
  • Dimensions: 24" L x 6" W x 12.5" H
  • Speaker Cutout Diameter: 9.125"
  • Max Depth: 5.375"
  • Airspace: 0.68
  • Authorized Internet Dealer
  • 21-Day Manufacturer's Warranty

Wet Sounds SW-10FA-S4-B (Black)

600W 10" XS Series Single 4-ohm Free Air Marine Subwoofer
Quantity: 1

General Features:

  • 10" XS Series Single 4-ohm Free Air (Infinite Baffle) Marine Subwoofer (Black)
  • Power Handling:
    • Peak: 600 watts
    • RMS: 300 watts
  • Injection Molded High Strength Composite Cone
  • Moisture Resistant Rubber Spider & Surround
  • Powder Coated gloss black cast aluminum frame
  • Gold Plated Speaker Terminals
  • Optimized for Infinite Baffle Applications
  • Cosmetic appealing closed grill included
  • Frequency Response: 20 - 500Hz
  • Sensitivity: 88 dB
  • Top-mount depth: 4.72" (119.88mm)
  • Diameter: 11.02" (279.90mm)
  • Hole Cut Out: 9.45" (240.03mm)
  • Sub Volume ( ft³): 0.063
  • Also available in Single 2-ohm: Wet Sounds SW-10FA-S2-B
  • Replacement Grill available: Wet Sounds PT-SW-10 Grill (Black)
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

TS Parameters

  • Resistance: 3.9Ω
  • Sd: 0.0384 m2
  • Xmax: 11.5 mm
  • Mms (g): 142
  • Cms (uM/N): 120
  • Fs: 38 Hz
  • Vas: 25 L
  • Qms: 4.44
  • Qes: 0.69
  • Qts: 0.60
  • Bl (T*m): 14
  • Le: 1.3 mH
  • Sub Volume ( ft³): 0.063

For more information on the Thiele and Small Parameters, visit our T/S Parameters Article

Priced Individually

Check out the Wet Sounds SW-65i-B Owner's Manual

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
300 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
600 watts
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Injection Molded Polypropylene Composite
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
88 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 500 Hz
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
11.50 mm
Amplified or Non-Amplified
This indicates if the subwoofer comes with an amplifier installed as one unit or Non-amplified which requires an external amp to power the subwoofer

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Vehicle Specific
The height of the item, measured from top to bottom, in inches.
The width of the item from left to right (side-to-side) measured in inches.
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.

Specials with this Item

Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Exclusive Deal

Warranty and Return Policy

Parts Warranty Duration
21 days
Labor Warranty Duration
21 days
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary


Model Number




Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Polaris RZR / RZR XP Glovebox Enclosure & Sub Combo by SSV Works & Wet Sounds

Item Added to Cart

Polaris RZR / RZR XP Glovebox Enclosure & Sub Combo by SSV Works & Wet Sounds

SSV Works RZ3-GBSB10-U Custom Molded Unloaded Glovebox Subwoofer Enclosure + 600W XS Series Single 4-ohm Marine Subwoofer (WetSounds)


Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection